AWLGRIP GLOSS FINISH PRIMER

What is Awlgrip Gloss Finish Primer and why choose it?

Awlgrip Gloss Finish Primer Grey Base is a professional, two-component liquid coating designed for exterior use. Classified as a flammable liquid with specific health and environmental hazards, it is intended for professional and industrial users who require a high-performance primer system and are equipped to handle regulated chemical products safely.

The product complies with Regulation (EC) No. 1907/2006 (REACH) and related EU legislation. It is formulated with titanium dioxide and solvent-based components to deliver a grey, solvent-odor primer with controlled viscosity and density, suitable for use in demanding exterior environments when correct preparation, mixing and application procedures are followed.

Main features

• Two-component exterior coating: Specifically identified as a two-component coating for exterior use, suitable for professional and industrial applications.
• Grey base color: Supplied as a grey liquid primer, allowing good visual coverage and uniform appearance.
• Solvent-based formulation: Contains organic solvents such as n-butyl acetate, heptan-2-one and others, providing appropriate flow and film formation when correctly applied.
• Regulated and classified product: Classified under Regulation (EC) No. 1272/2008 as Flam. Liq. 3 (H226), Skin Sens. 1 (H317), STOT SE 3 (H336) and Aquatic Chronic 3 (H412).
• Professional-only use: Marked “FOR PROFESSIONAL USE ONLY”, requiring appropriate training, equipment and adherence to safety procedures.
• Stability in normal conditions: The product is stable under normal storage and use conditions and is not expected to undergo hazardous reactions when handled as recommended.

Key hazards and safety profile

• Flammability: Flammable liquid and vapor (Flash point approx. 37°C, closed cup). Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Skin sensitization: May cause an allergic skin reaction (H317). Contains sensitizing ingredients including specific piperidyl and benzotriazole derivatives.
• Specific target organ toxicity (single exposure): May cause drowsiness or dizziness (H336) and narcotic effects; some components may irritate the respiratory tract.
• Environmental hazard: Harmful to aquatic life with long lasting effects (H412). Avoid release to the environment and prevent entry into drains and waterways.
• Other toxicological notes: Can cause central nervous system (CNS) depression following inhalation or ingestion. Once sensitized, severe allergic reactions may occur on subsequent exposure to low levels.

Technical specifications

• Product form: Mixture (liquid).
• Color: Grey.
• Odor: Solvent.
• Boiling point (initial): Approximately 126°C (258.8°F).
• Flash point: Approx. 37°C (98.6°F), closed cup (Pensky-Martens).
• Explosive limits (based on n-butyl acetate): Lower approx. 1.4 % vol., upper approx. 7.6 % vol.
• Density: Approx. 1.268 g/cm³ (DIN EN ISO 2811-1).
• Viscosity (kinematic): Approx. 371 mm²/s at room temperature; 470 mm²/s at 40°C (DIN EN ISO 3219).
• Solubility in cold water: Not soluble (OECD TG 105).
• Physical state of particles: Liquid product with 0 % particles of aerodynamic diameter ≤ 10 μm.
• Chemical stability: Stable under normal conditions of storage and use.
• Incompatible materials: Oxidizing materials.

Applications and use cases

• Intended use: Two-component coating for exterior use.
• User groups: Identified uses include professional use, industrial use and all other uses where users are trained and equipped to handle hazardous solvent-borne coatings.
• Use conditions: Must be applied in well-ventilated areas, with control of ignition sources and use of appropriate personal protective equipment as specified in the safety data sheet.

Section 6 – Transport information

The following information is based on the transport classification provided for the product:

• UN number / ID number: UN1263.
• UN proper shipping name: PAINT (PINTURAS).
• Transport hazard class: Class 3 (flammable liquid).
• Packing group: III.
• Environmental hazards: Not classified as environmentally hazardous for transport under ADR/RID, IMDG or IATA.
• ADR/RID tunnel code: D/E.
• Viscous liquid exception: Classified as a class 3 viscous liquid that is not subject to regulation in packagings up to 450 L under ADR/RID 2.2.3.1.5.1 and IMDG 2.3.2.5.
• IMDG emergency schedules: F-E, S-E.
• Transport within user’s premises: Always transport in closed, upright and secure containers. Ensure that personnel transporting the product know what to do in case of accident or spillage.
• Bulk transport according to IMO instruments: Not applicable.

Section 7 – Personal protective measures (Section 8: Exposure controls / PPE)

Engineering controls and hygiene

• Use only with adequate ventilation. Employ process enclosures, local exhaust ventilation or other engineering controls to keep airborne concentrations below occupational exposure limits and below lower explosive limits.
• Use explosion-proof ventilation equipment and electrical installations in areas where the product is handled.
• Prohibit eating, drinking and smoking in areas where the product is handled, stored or processed. Wash hands, forearms and face thoroughly after handling.
• Ensure eyewash stations and safety showers are located close to the workstation.

Eye and face protection

• Wear safety eyewear complying with an approved standard.
• When splashes or mists may occur, use safety glasses with side shields as a minimum protection level, unless a higher degree of protection is indicated by the risk assessment.

Hand protection

• Wear chemical-resistant, impervious gloves complying with an approved standard whenever handling the product, if indicated by the risk assessment.
• For prolonged or frequently repeated contact, gloves with protection class 6 (breakthrough time > 480 minutes according to EN374) are recommended. Recommended materials: Viton or nitrile, thickness ≥ 0.38 mm.
• For brief contact, gloves with protection class 2 or higher (breakthrough time > 30 minutes according to EN374) are recommended. Recommended material: nitrile, thickness ≥ 0.12 mm.
• Replace gloves regularly and if any sign of damage or degradation appears. Performance may be reduced by physical or chemical damage or inadequate maintenance.

Skin and body protection

• Select personal protective clothing for the body based on the specific task and associated risks and have it approved by a specialist before use.
• Where there is a risk of ignition from static electricity, wear anti-static protective clothing. For maximum protection, clothing should include anti-static overalls, boots and gloves, meeting EN 1149 requirements.
• Use appropriate footwear and additional skin protection as required by the task.

Respiratory protection

• Select a respirator that meets relevant standards or certifications, as part of a formal respiratory protection program.
• Recommended: respirator conforming to EN140 with type A/P2 filter or better when ventilation is insufficient.
• Dry sanding, flame cutting and welding of the dry paint film can produce dust and hazardous fumes; wet sanding/flatting is preferred. If exposure cannot be avoided by engineering controls, suitable respiratory protection must be used.

Environmental exposure controls

• Check emissions from ventilation or work-process equipment to ensure compliance with environmental regulations.
• If required, use fume scrubbers, filters or engineering modifications to reduce emissions to acceptable levels.

FAQ – Awlgrip Gloss Finish Primer Grey Base

1. Is Awlgrip Gloss Finish Primer suitable for exterior use?

   Yes. The identified product use is a two-component coating for exterior use, intended for professional and industrial users.

2. Who is allowed to use this product?

   The product is marked “FOR PROFESSIONAL USE ONLY” and is intended for users who are trained in handling hazardous solvent-borne coatings and who can implement the necessary safety measures.

3. What are the main hazards I should be aware of?

   The product is a flammable liquid and vapor, may cause an allergic skin reaction, may cause drowsiness or dizziness, and is harmful to aquatic life with long lasting effects.

4. How should I store the primer safely?

   Store in the original, tightly closed container in a dry, cool and well-ventilated area, protected from direct sunlight, away from oxidizing materials, food and drink, and all ignition sources. Keep locked up and do not store in unlabelled containers.

5. What personal protective equipment is recommended during use?

   Use chemical-resistant gloves (such as Viton or nitrile), safety glasses with side shields, suitable protective clothing and, when needed, a respirator conforming to EN140 with A/P2 filter or better. Ensure effective ventilation at all times.

6. What should I do in case of skin contact?

   Wash immediately with plenty of soap and water, remove contaminated clothing and shoes, continue rinsing for at least 10 minutes and seek medical attention if symptoms occur. Wash contaminated clothing before reuse.

7. How is waste from this product classified?

   When disposed of as waste, the product is classified under the European Waste Catalogue code 08 01 11* (waste paint and varnish containing organic solvents or other hazardous substances). Disposal must follow applicable local and national regulations.

8. Does this product fall under VOC regulations?

   Yes. The provisions of Directive 2004/42/EC on VOCs apply to this product, as indicated in the safety data sheet.

9. Is the product considered PBT or vPvB?

   No. The mixture does not contain substances assessed to be persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).

10. How should spills be handled?

    Eliminate ignition sources, provide ventilation and use non-sparking tools and explosion-proof equipment. Small spills can be absorbed with inert dry material; large spills should be contained with non-combustible absorbents such as sand or earth and collected for disposal by a licensed waste contractor. Prevent entry into drains and waterways.

*Content generated by AI