NAUTICCLEAN 18 TEAK STEP 2

The results to be obtained are extraordinary, TEAK STEP 2 is the perfect de-greaser for Teak.

Advantages:

Perfect de-greasing.

-Perfect restoration and in combination with the cleaner and descaler TEAK STEP 1 easy to use.

-It does not affect or alter the joints (laboratory tested).

-Does not alter stainless steel (laboratory tested).

-No rinsing required between the two phases. time saving and effort reduction.

-No hydrochloric acid.

Instructions for use:

Dosage: apply pure or reduced to 50% with water depending on the state of the Teak. After the application of TEAK STEP 1, without rinsing, put the product TEAK STEP 2 pure or diluted in a bucket and then spread it with a clean and soft cover brush in the direction of the grain or beta of the wood. Then you will see how the appearance of the wood is enhanced and revived and lightened as you spread the product until it returns to its original appearance. Leave it to act for 5 to 10 minutes and then rinse with plenty of water using a soft cover brush to avoid damaging the fibers of the teak.

ATTENTION: Do not let STEP TEAK 2 dry on teak wood. We recommend to be provided with the necessary PPE such as gloves, boots, overalls, eye protection, etc...