TOPCOAT SPRAY FAST EVAP. REDUCER T0002

What is TOPCOAT SPRAY FAST EVAP. REDUCER T0002 and why choose it?

TOPCOAT SPRAY FAST EVAP. REDUCER T0002 by Awlgrip is a fast evaporating reducer and equipment cleaner designed for use with Awlgrip, Awlcraft 2000 and Awlcraft SE urethane topcoats. It is formulated to keep the paint film open long enough for proper flow while evaporating quickly to achieve adequate dry and dust-free times, especially in cooler application conditions. In addition, T0002 works as an excellent gun and equipment cleaner, helping maintain spray equipment performance.

Main features

• Fast-evaporating reducer: Optimized solvent blend to promote quick evaporation while maintaining good paint flow.
• Recommended temperature range: Intended for use in Awlgrip/Awlcraft 2000/Awlcraft SE topcoats when application and cure temperatures are between 55–70°F (13–21°C).
• Improved finish quality in cool conditions: Keeps the paint film open for proper leveling at 55–70°F (13–21°C) but evaporates fast enough to avoid extended dry times.
• Equipment cleaner: Described as an excellent cleaner for spray guns and related equipment.
• Use with flattened topcoats: Recommended reducer for topcoats flattened with G3013 Flattening Agent and for G2002 Awlgrip Flat Black to achieve best finish development.
• High-temperature flexibility: Can be used together with T0005 Hot Weather Reducer at temperatures above 90°F (32°C) to help combat solvent popping.
• High-purity solvent system: Composition based on butanone (≥90 %), providing predictable evaporation and compatibility with the specified systems.
• For professional, industrial and consumer use: The SDS lists professional, industrial and consumer uses for two-component coatings for interior and exterior applications.

Technical specifications

• Product type: Fast evaporating reducer and equipment cleaner for urethane topcoats.
• Recommended systems: Awlgrip, Awlcraft 2000, Awlcraft SE topcoats; topcoats flattened with G3013 Flattening Agent; G2002 Awlgrip Flat Black.
• Active ingredient: Butanone (CAS 78-93-3), ≥90 %.
• VOC content: 806 g/L (6.7 lb/gal).
• Physical state: Liquid.
• Color: Colorless.
• Odor: Solvent.
• Density: 0.805 g/cm³ (DIN EN ISO 2811-1).
• Boiling point: 79°C (174.2°F).
• Flash point: -6°C (21.2°F), closed cup (Pensky-Martens).
• Explosion limits in air: Approx. 1.8 % (lower) to 11.5 % (upper), based on butanone.
• Viscosity (kinematic): 5 mm²/s (room temperature) and 4 mm²/s at 40°C (DIN EN ISO 3219).
• Solubility: Not soluble in cold water (OECD TG 105).
• Primary hazards (GHS/CLP): Flammable liquid Category 2; Eye irritation Category 2A; Specific target organ toxicity (single exposure, narcotic effects) Category 3.
• Main hazard statements: Highly flammable liquid and vapor; causes serious eye irritation; may cause drowsiness or dizziness; repeated exposure may cause skin dryness or cracking.

Applications and use cases

As a topcoat spray reducer

• Use T0002 when spraying Awlgrip, Awlcraft 2000 or Awlcraft SE topcoats in application and cure temperatures between 55–70°F (13–21°C).
• Within this range, T0002 keeps the film open for proper flow and leveling while still curing to dust-free in a practical time.
• Most Awlgrip and Awlcraft 2000 topcoats are designed for up to 25 % reduction (based on combined base plus converter volume). Example: mixing 1 quart of base and 1 quart of converter yields 2 quarts; 25 % reduction corresponds to 0.5 quart of reducer.

Use in flattened and low-gloss systems

• Recommended as the reducer for topcoats flattened with G3013 Flattening Agent.
• Recommended reducer for G2002 Awlgrip Flat Black to assist with finish development and appearance.

Combination with T0005 in hot weather

• At temperatures above 90°F (32°C), T0002 may be blended with T0005 Hot Weather Reducer to help combat solvent popping.
• T0005 has a very slow evaporation rate; combining it with T0002 allows improved flow while controlling excessive solvent retention.

Equipment and gun cleaning

• Described as an excellent gun and equipment cleaner, suitable for flushing and cleaning spray equipment used with compatible Awlgrip coatings.

Temperature adjustments

• In hot conditions, reducers evaporate faster. The product literature notes that increasing total reducer content in the mix by about 5–10 % can help compensate when painting at higher temperatures. Exact values for any specific system should be verified for the coating being used.

Section 8 – Individual protection measures

Engineering controls

• Use only with adequate ventilation.
• Employ local exhaust or other engineering controls to keep airborne concentrations below applicable exposure limits and below lower explosive limits.
• Use explosion-proof ventilation and electrical equipment.

Eye and face protection

• Use safety eyewear that complies with an approved standard when there is risk of exposure to liquid splashes, mists or vapors.
• If contact is possible, wear chemical splash goggles.

Hand protection

• Wear chemical-resistant, impervious gloves meeting appropriate standards when handling the product.
• For prolonged or frequently repeated contact, gloves of Viton or nitrile are recommended, with breakthrough times corresponding to class 6 (>480 minutes) for heavy exposure or class 2 or higher (>30 minutes) for short contact.
• Replace gloves regularly and if any signs of damage or degradation appear.

Skin and body protection

• Wear suitable protective clothing selected according to the task and risks.
• Where there is risk of ignition from static electricity, use anti-static protective clothing including anti-static overalls, boots and gloves.
• Ensure appropriate footwear and additional skin protection measures as required by the specific job.

Respiratory protection

• Where engineering controls do not maintain airborne concentrations below exposure limits, use a respirator that meets the appropriate standard or certification.
• Respirators must be used within a comprehensive respiratory protection program covering fit, training and correct use.
• The SDS recommends a respirator conforming to EN140 with type A/P2 filter or better where needed.

Hygiene measures

• Wash hands, forearms and face thoroughly after handling and before eating, drinking, smoking or using the lavatory.
• Remove contaminated clothing and protective equipment before entering eating areas, and wash contaminated clothing before reuse.
• Ensure that eyewash stations and safety showers are close to the workstation.

Section 14 – Transport information

• UN number: UN1263.
• UN proper shipping name (DOT/IMDG/IATA): PAINT RELATED MATERIAL.
• Transport hazard class: Class 3 (flammable liquid).
• Packing group: II.
• Environmental hazards: Not classified as a marine pollutant according to the referenced transport information.
• Special precautions for user: Transport in closed containers that are upright and secure; ensure that persons transporting the product know the procedures in case of accident or spillage.

FAQ

1. In what temperature range should I use TOPCOAT SPRAY FAST EVAP. REDUCER T0002?

   Use T0002 in Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats when application and cure temperatures are between 55–70°F (13–21°C).

2. How much reducer should I add to Awlgrip or Awlcraft 2000 topcoats?

   Most Awlgrip and Awlcraft 2000 topcoats recommend up to 25 % reduction based on the combined volume of base plus converter. For example, 12 oz base + 12 oz converter (24 oz total) would typically use 6 oz of reducer for 25 % reduction. Always follow the specific coating’s mixing instructions. If information is not available, use: Consultar ficha técnica del fabricante.

3. Can T0002 be used at very high temperatures?

   At temperatures above 90°F (32°C), T0002 can be used in combination with T0005 Hot Weather Reducer to help combat solvent popping. Consultar ficha técnica del fabricante.

4. Is T0002 suitable for brushing applications?

   The data provided describes T0002 as a fast evaporating reducer for spray-applied urethane topcoats and as an equipment cleaner. For brushing reducers, products such as T0031 are specifically mentioned. Consultar ficha técnica del fabricante.

5. Can I use T0002 with flattened or low-gloss finishes?

   Yes. T0002 is recommended as the reducer for topcoats flattened with G3013 Flattening Agent and for G2002 Awlgrip Flat Black to support proper finish development.

6. Is T0002 also an equipment cleaner?

   Yes. The product data sheet states that T0002 is an excellent gun and equipment cleaner, making it suitable for flushing spray equipment used with compatible systems.

7. What are the main safety hazards of T0002?

   T0002 is a highly flammable liquid and vapor, causes serious eye irritation and may cause drowsiness or dizziness. Repeated exposure can cause skin dryness or cracking. Appropriate PPE, ventilation and handling precautions are required.

8. How should T0002 be stored?

   Store in accordance with local regulations, in the original, tightly closed container, in a dry, cool and well-ventilated area away from heat, sparks, open flames and oxidizing materials. Keep containers upright and properly labeled and store locked up.

9. Can T0002 be blended with other Awlgrip reducers?

   The reducers listed for Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats can be blended with each other in any ratio to fine-tune flow and evaporation rates. T0002 may therefore be combined with other compatible Awlgrip topcoat reducers, such as T0005, where appropriate.

10. Is there ecological information I should be aware of?

    The mixture is not classified as hazardous to the environment under the CLP regulation, but release to drains or watercourses should be avoided. Disposal must follow local and national regulations.

*Contenido generado por IA.