AWLCRAFT SE E-LINE

What is Awlcraft SE E-Line and why choose it?

Awlcraft SE E-Line by Awlgrip is a revolutionary basecoat in a multi-part basecoat/clearcoat system. It uses metallic, pearlescent and special-effect pigments to deliver high-opacity colour effects with fast drying times. Designed to be applied over Awlgrip primers or existing Awlgrip/Awlcraft topcoats and then clear coated, it forms part of a robust, high-performance exterior coating system for professional use.

Main features

• Advanced effect finishes: metallic, pearl and other effect pigments for distinctive visual finishes.
• High-opacity basecoat: excellent hiding power to achieve opacity in typically 1–3 coats, depending on colour and system.
• Fast drying formulation: allows multiple coats to be applied within a single day, reducing overall working time.
• Part of a multi-layer system: provides colour and effect and must be finished with a compatible Awlgrip clearcoat (Awlcraft 2000 Clear, Awlcraft CS or Awlgrip HDT Clear).
• Spray-application only: optimised for professional air-atomized spray equipment.
• Consistent film build: recommended dry film thickness of 25 µm (1 mil) per coat, with a maximum of 50 µm (2 mil) per coat.
• Exterior durability: two-component system intended for exterior use when used as specified.
• Compatible with Awlgrip systems: apply over appropriate Awlgrip primers or existing Awlgrip/Awlcraft topcoats.
• Professional-only product: restricted to professional users.

Technical specifications

• Product type: two-component basecoat for exterior use (must be clear coated).
• Volume solids: 22 %.
• Available packs: 1 US Quart, 1 US Gallon.
• Base ranges:
  • L-Code: Awlcraft SE Solid Basecoat.
  • E-Code: Awlcraft SE Metallic Basecoat.
  • P-Code: Awlcraft SE Pearlescent Basecoat.
  • S-Code: Awlcraft SE Solids, Pearls, Metallic Basecoats.
• Converter: OG3010 (Awlcat #2, G3010 in mix ratio description).
• Reducers: T0001, T0003, T0005.
• Equipment cleaning: T0001, T0002, T0003.
• Typical shelf life: 3 years.
• VOC (product as supplied, without reducer): 691 g/L (5.77 lb/gal).

Theoretical coverage and film build

• Application method: air-atomized spray.
• Number of coats: 2 (minimum).
• Recommended wet film thickness per coat: 50 µm (2 mil).
• Recommended dry film thickness per coat: 25 µm (1 mil).
• Maximum dry film thickness per coat: 50 µm (2 mil).
• Theoretical coverage per coat at recommended DFT: 19.8 m²/L (806.7 ft²/gal), based on 100 % transfer efficiency.

Mixing and reduction

• Base:converter mix ratio: 100:15 by volume.
• Complete mix example: 100 parts Base : 15 parts Awlcat #2 (G3010) : 50 parts reducer.
• Recommended thinning: approx. 44 % with T0001, T0003 or T0005 reducers to achieve spray viscosity.
• Spraying viscosity: 14–15 seconds DIN 4 cup.
• Pot life: significantly shorter than regular topcoats (exact value not specified); basecoats are designed for spray application only.
• Additives: accelerators must not be added to Awlcraft SE.

Application parameters

• Surface preparation:
  • Apply over the appropriate Awlgrip primer or existing Awlgrip/Awlcraft topcoat.
  • Surface must be clean and dry.
  • Clean with Surface Cleaner T0170 (US/AP) or T0340 (EU) using the two-cloth wipe-down method.
  • For maximum gloss and distinction of image, smooth sand primer and/or existing topcoat with P400 grit paper before application.
• Application equipment: air-atomized spray only.
• Recommended spray setup:
  • Fluid tip: 1.20–1.40 mm (47–55 thou).
  • Fluid flow rate: 180–250 cc/min.
  • Air pressure: 2–2.4 bar (29–35 psi).
• Application technique:
  • Apply a first cross-coat using a smooth, even, fluid spray technique over 25–35 cm (10–14 inch) wide areas at a time.
  • Maintain constant air pressure to ensure an even finish.
  • Allow to flash off until the surface turns matt (approximately 10 minutes at 25 °C / 77 °F).
  • Apply a second cross-coat in the same way.
  • For metallic or 2-stage pearlescent colours, an optional dropcoat (mistcoat) may be applied prior to clearcoat to improve metallic flake orientation and colour uniformity.
  • For 3-stage pearlescent systems, build opacity with the solid basecoat in 2–3 coats, then apply the pearl mid-coat in 1–2 even coats.
  • For solid colours, apply smooth wet coats until opacity is achieved (typically 1–2 coats; some colours may require more).
• Clearcoating:
  • Once the basecoat surface is completely matt, apply 2 full coats of Awlcraft 2000 Clear, Awlcraft CS or Awlgrip HDT Clear.
  • After applying the specified basecoat colour, allow the coating to cure a minimum of 1 hour at 25 °C (77 °F) and up to 3 days before clear applications.
• Surface cleanliness prior to clearcoat:
  • Keep Awlcraft SE basecoat surface clean at all times before clearcoat application.
  • Use clean compressed air or tack rags to reduce dust contamination.
  • Remove oil contamination with light amounts of Awlgrip Wipe Down Solvent (NA/AP: Awlprep T0008 or Awlprep Plus T0115; EU: Surface Cleaner T0340).

Drying and recoat times

• At 25 °C (77 °F):
  • Tape free: 90 minutes.
  • Light service: 24 hours.
  • Full cure time: 7 days.
  • Overcoat (Awlcraft 2000, Awlcraft CS, Awlcraft SE, Awlgrip HDT Clearcoat): minimum 60 minutes, maximum 3 days.
• At 35 °C (95 °F):
  • Tape free: 60 minutes.
  • Light service: 24 hours.
  • Full cure time: 7 days.
  • Overcoat (Awlcraft 2000, Awlcraft CS, Awlcraft SE, Awlgrip HDT Clearcoat): minimum 60 minutes, maximum 3 days.

Environmental and temperature conditions

• Surface/ambient temperature for application: 23–32 °C (70–90 °F) recommended.
• Substrate temperature limits:
  • Do not apply to surfaces less than 3 °C (5 °F) above dew point.
  • Do not apply to surfaces warmer than 41 °C (105 °F).
• Ambient temperature limits: minimum 10 °C (50 °F), maximum 41 °C (105 °F).
• Ventilation: use only with adequate ventilation; explosion-proof ventilation equipment is recommended.

Applications and use cases

• Exterior topcoat systems: designed as the colour and effect basecoat layer in a multi-part system for exterior surfaces.
• Refinishing over Awlgrip / Awlcraft systems: can be applied over appropriate Awlgrip primers and over existing Awlgrip or Awlcraft topcoats after correct preparation.
• Effect finishes: ideal where high-end metallic, pearlescent or special-effect finishes are required as part of a professional coating specification.
• Solid colour basecoats: suitable for solid colour applications where a clear-coated basecoat system is preferred.
• Professional and industrial environments: intended for professional and industrial users, including applications where controlled spray facilities and appropriate PPE are available.

FAQ

1. Is Awlcraft SE E-Line a single-pack paint?

   No. Awlcraft SE is part of a two-component coating system. It is mixed with converter OG3010 (Awlcat #2) and reduced with the specified reducers.

2. Does Awlcraft SE need a clearcoat?

   Yes. Awlcraft SE must be clear coated. After the basecoat is fully matt and within the specified recoat window, apply two full coats of a compatible Awlgrip clearcoat such as Awlcraft 2000 Clear, Awlcraft CS or Awlgrip HDT Clear.

3. How many coats are typically required?

   For most colours, 1–2 coats are sufficient to achieve opacity. Some colours and 3-stage pearlescent systems may require 2–3 basecoats plus 1–2 pearl mid-coats.

4. What is the recommended mixing ratio?

   The base to converter ratio is 100:15 by volume, followed by addition of approximately 50 parts reducer. An example mix is 100 parts base, 15 parts Awlcat #2 (G3010) and 50 parts reducer.

5. Can I add accelerators to Awlcraft SE to speed drying?

   No. Accelerators must not be added to Awlcraft SE basecoats.

6. Can Awlcraft SE be brushed or rolled?

   No. Awlcraft SE is designed for spray application only using air-atomized equipment.

7. What substrates can I apply Awlcraft SE over?

   Apply only over appropriate Awlgrip primers or existing Awlgrip/Awlcraft topcoats that have been properly cleaned and P400 sanded as specified.

8. What are the recommended drying and overcoating times at 25 °C?

   At 25 °C (77 °F), Awlcraft SE is typically tape free in 90 minutes, suitable for light service after 24 hours and reaches full cure in 7 days. Clearcoats can be applied from 60 minutes up to 3 days after basecoat application.

9. What is the VOC content of Awlcraft SE?

   The theoretical VOC of Awlcraft SE as supplied (without reducer) is 691 g/L (5.77 lb/gal).

10. How long can the product be stored?

    The typical shelf life is 3 years when stored in unopened original containers under recommended conditions.

Section 14 – Transport information

• UN number / ID number: UN1263.
• UN proper shipping name: PAINT.
• Transport hazard class: Class 3 (flammable liquid).
• Packing group: III.
• Environmental hazards: not classified as environmentally hazardous for transport under ADR/RID, IMDG or IATA.
• Transport classifications:
  • ADR/RID: UN1263, PAINT, Class 3, PG III, tunnel code (D/E).
  • IMDG: UN1263, PAINT, Class 3, PG III, emergency schedules F-E, S-E.
  • IATA: UN1263, PAINT, Class 3, PG III.
• Special precautions for user: during on-site transport, always move product in closed, upright and secure containers. Ensure personnel know what to do in case of accident or spillage.
• Transport in bulk according to IMO instruments: not applicable.

Section 8 – Individual protective measures

Exposure controls and personal protection

• Engineering controls:
  • Use only with adequate ventilation.
  • Employ process enclosures and local exhaust ventilation to keep airborne contaminants below applicable limits and below lower explosive limits.
  • Use explosion-proof ventilation equipment.
• General hygiene measures:
  • Wash hands, forearms and face thoroughly after handling and before eating, drinking or smoking.
  • Remove contaminated clothing and protective equipment before entering eating areas.
  • Ensure eyewash stations and safety showers are close to the workstation.
• Eye and face protection:
  • Wear chemical splash goggles and/or a face shield complying with an approved standard when there is a risk of splashes, mists or vapours.
  • If inhalation hazards exist, a full-face respirator may be required.
• Hand protection:
  • Use chemical-resistant, impervious gloves complying with EN374 or equivalent.
  • For prolonged or frequently repeated contact, a protection class 6 glove (breakthrough time > 480 minutes) is recommended; suitable materials include Viton or nitrile with thickness ≥ 0.38 mm.
  • For brief contact, at least protection class 2 gloves (breakthrough time > 30 minutes) such as nitrile with thickness ≥ 0.12 mm are recommended.
  • Replace gloves regularly and when signs of damage or degradation appear.
• Body protection:
  • Select protective clothing based on the tasks and risks and have it approved by a specialist.
  • Where ignition from static electricity is a risk, wear anti-static protective clothing including overalls, boots and gloves compliant with EN 1149.
• Other skin protection:
  • Use appropriate footwear and any additional skin protection measures as required by the task and risk assessment.
• Respiratory protection:
  • Select a respirator that meets the appropriate standard or certification based on hazard and exposure potential.
  • Wear a respirator conforming to EN140 with type A/P2 filter or better when ventilation is inadequate.
  • Dry sanding, flame cutting or welding of the dry paint film can generate hazardous dust or fumes; wet sanding/flatting is preferred, or suitable respiratory protection must be used.
• Environmental exposure controls:
  • Check emissions from ventilation and process equipment to ensure compliance with environmental legislation.
  • Fume scrubbers, filters or process modifications may be necessary to reduce emissions.

*Contenido generado por IA