What is Epifanes Spray Thinner 1-Component and why choose it?
Epifanes Spraythinner for Paint & Varnish is a clear, solvent-based thinner specifically formulated as a diluent for spray application of one-component paints and varnishes. Based on hydrocarbons C7–C9 (n-alkanes, isoalkanes, cyclics), it is designed for professional use in sectors such as crafts, services and other public-domain applications where consistent spray performance is required.
This spray thinner offers a low viscosity, high-solvent formulation with 100% VOC content, making it suitable where fast-evaporating, highly flammable thinners are needed for efficient spray work on both indoor and outdoor surfaces.
Main features
- Dedicated spray thinner for one-component systems: Developed for spray application of single-component paints and varnishes.
- Clear, low-viscosity fluid: Fluid, clear appearance for predictable mixing and atomisation.
- High solvent strength: 100% organic solvent content for effective dilution of compatible coatings.
- Fast-evaporating and highly flammable: Flash point below 10 °C and classified as Flammable Liquid Category 2 (highly flammable liquid and vapour).
- Consistent spray behaviour: Kinematic viscosity of approx. 20 s (ISO 4, at 20 °C) supports good flow in spray equipment.
- Professional application range: Identified uses include manual work involving hand contact and industrial spraying.
Technical specifications
- Product type: Spray thinner / diluent for one-component paints and varnishes
- Brand: Epifanes
- Chemical description: Solvent mixture
- Main component: Hydrocarbons, C7–C9, n-alkanes, isoalkanes, cyclics
- EC number: 920-750-0
- Physical state: Fluid
- Colour: Clear
- Odour: Characteristic
- Boiling point: > 90 °C
- Flash point: < 10 °C
- Flammability: Highly flammable liquid and vapour
- Density (20 °C): approx. 0.738 g/cm³ (about 6.16 lb/gal)
- Viscosity (kinematic, 20 °C): 20 s ISO 4
- Water solubility: Not miscible or difficult to mix
- pH: Mixture is non-soluble in water
- VOC content: 100% (approx. 738 g/l, 6.16 lb/gal)
- Organic solvents: 100%
- Explosive properties: Not classified as explosive, but explosive air/vapour mixtures may form
- Environmental classification (EU): Water hazard class 3 (extremely hazardous for water)
Applications and use cases
- Spray application of one-component paints on suitable substrates where dilution is required to achieve sprayable viscosity.
- Spray application of one-component varnishes in professional environments.
- Industrial spraying (PROC7) where controlled thinning of compatible coatings is necessary.
- Manual operations with hand contact (PROC19) carried out by trained professionals.
- Indoor and outdoor use where coatings are applied onto articles and surfaces (ERC8c and ERC8f), and at industrial sites (ERC5).
FAQ
1. What is Epifanes Spray Thinner 1-Component used for?
It is a spray thinner (diluent) formulated for the spray application of one-component paints and varnishes, helping to achieve the correct viscosity for spray equipment.
2. Is this product suitable for brushing or rolling?
The safety data identifies it specifically as a thinner for spray application. Consultar ficha técnica del fabricante.
3. Is the thinner flammable?
Yes. It is classified as a highly flammable liquid and vapour (Flammable Liquid Category 2) with a flash point below 10 °C. Keep away from heat, hot surfaces, sparks, open flames and all ignition sources. No smoking.
4. Can it be used indoors?
Yes, indoor use is identified, but only in a well-ventilated area. The product should be used outdoors or with adequate ventilation and, where needed, appropriate respiratory protection.
5. What are the main health hazards?
The product may cause drowsiness or dizziness (specific target organ toxicity, single exposure). If swallowed and entering the airways, it may be fatal (aspiration hazard). Repeated exposure may cause skin dryness or cracking.
6. How should I store Epifanes Spray Thinner?
Store only in the original, tightly sealed container in a cool, dry, well-ventilated place, away from heat, direct sunlight and ignition sources.
7. Is the product hazardous to the environment?
Yes. It is rated as extremely hazardous for water. Do not allow the product to reach sewage systems, surface water or ground water, even in small quantities.
8. How should leftover product and containers be disposed of?
Do not dispose of with household waste and do not pour into drains. Disposal of product and uncleaned packaging must follow local, regional, national and international regulations.
9. Is the product intended for consumer use?
The main sector of use indicated is professional (SU22). Keep out of reach of children.
Section 14 – Transport information
- UN number / ID number: UN1263
- UN proper shipping name (ADR): 1263 PAINT RELATED MATERIAL (vapour pressure at 50 °C not more than 110 kPa), ENVIRONMENTALLY HAZARDOUS
- UN proper shipping name (IMDG, IATA): PAINT RELATED MATERIAL
- DOT proper shipping name: CONSUMER COMMODITY, ORM-D; Paint related material
- Transport hazard class: Class 3, Flammable liquids (ADR, DOT, IMDG, IATA)
- Label: 3 (Flammable liquid)
- Packing group: II
- Marine pollutant: No
- Special marking (ADR): Symbol (fish and tree)
- Hazard identification number (Kemler code): 33
- EMS Code (IMDG): F-E, S-E
- Stowage category: A
- Limited quantities (ADR, IMDG): 5 L
- Excepted quantities (ADR, IMDG, IATA): Code E2 – max. 30 ml per inner packaging; 500 ml per outer packaging
- DOT quantity limitations: On passenger aircraft/rail 5 L; on cargo aircraft only 60 L
- Transport in bulk according to IMO/IBC: Not applicable
Section 8 – Individual protection measures
General protective and hygienic measures
- Keep away from food, beverages and animal feed.
- Immediately remove all soiled or contaminated clothing.
- Wash hands before breaks and at the end of work.
Respiratory protection
- Use a suitable respiratory protective device (Filter AX) when adequate ventilation is not ensured.
- For short or low exposure, a breathing filter device may be used.
- For intensive or prolonged exposure, use breathing apparatus independent of the surrounding air.
- A half-face mask for organic vapours and solvents according to EN140 type A1 or A2 is recommended.
Hand protection
- Wear protective gloves impermeable and resistant to the product.
- Selection of glove material should consider penetration time, diffusion rate and degradation.
- Due to missing tests, no specific glove material can be recommended for all situations.
- For permanent contact up to 15 minutes, gloves made of butyl rubber (BR) are indicated as suitable.
Eye and face protection
- Wear tightly sealed safety goggles to protect against splashes and aerosols.
Additional technical and organisational measures
- Ensure good general and local exhaust ventilation at the workplace.
- Keep ignition sources away and protect against electrostatic charges.
- Use explosion-proof electrical equipment where required.
*Contenido generado por IA
