What is Awlcraft CS and why choose it?
Awlcraft CS from Awlgrip is a two-component, intermixable matt clearcoat specifically designed for the yacht market. It is formulated for application on both small and large areas and can deliver a full range of gloss levels, from deep matt/flat through satin and semi-gloss up to high gloss. Awlcraft CS is designed to complement the complete color and effects range of Awlcraft SE basecoat and can also be applied over Awlcraft 2000, Awlgrip Topcoat and Awlgrip HDT. With simple mixing ratios, spray-friendly application and a smooth, hard, low-gloss finish, it offers a high-end appearance and durable performance for professional yacht refinishing.
Main features
- Customizable sheen clearcoat: one system to achieve matt, satin, semi-gloss or gloss finishes by intermixing Low Gloss Base OJ0300 and Medium Gloss Base OJ0301.
- Two-component matt clearcoat: base plus Awlcraft CS Curing Solution OJ0010.
- Designed for yachts: suitable for both small details and large hull or superstructure areas in the yacht market.
- Compatible color system: developed to complement the full range of colors and effects of Awlcraft SE basecoat; can also be applied over Awlcraft 2000, Awlgrip Topcoat and Awlgrip HDT.
- Smooth, hard, low-gloss film: provides a durable matt or low-sheen finish with good scratch resistance and reduced stripy or patchy appearance versus conventional flattening systems.
- Versatile spray application: suitable for conventional air atomized application, including HVLP and air assisted airless according to the applicator guide.
- Easy mixing and adjustment of gloss: clear mix tables define the parts of OJ0300 and OJ0301 required for each gloss band.
- Controlled drying and recoat windows: predictable touch-dry, hard-dry and overcoating times at 15°C, 25°C and 35°C.
Technical characteristics
Product composition and pack sizes
- System type: two-component clearcoat (Base + Curing Solution + Reducer).
- Bases:
- Awlcraft CS Low Gloss Base – OJ0300
- Awlcraft CS Medium Gloss Base – OJ0301
- Converter / Curing Solution: Awlcraft CS Curing Solution – OJ0010.
- Available packs: 1 US gallon (≈3.78 L) for Base and Curing Solution.
- Reducer (thinner): OT0003 (T0003) or T0002 depending on scale and conditions.
- Recommended equipment cleaners: OT0001, OT0002, OT0003.
- Typical shelf life: 2 years for base components; 1 year for Curing Solution.
Physical and performance data
- Volume solids: 46.4 %.
- Theoretical coverage (air atomized):
- Recommended coats: 2
- Recommended WFT per coat: 75 µm (3 mil)
- Recommended DFT per coat: 35 µm (1.4 mil)
- Theoretical coverage at recommended DFT: 13.2 m²/L or 537.8 ft²/gal (assuming 100 % transfer efficiency).
VOC information (product as supplied, without reducer)
- OJ0300 Low Gloss Base: 500 g/L (4.17 lb/gal).
- OJ0301 Medium Gloss Base: 526 g/L (4.39 lb/gal).
- OJ0010 Curing Solution (Part B): 360 g/L (3.01 lb/gal).
- Awlcraft CS mixed product (as supplied, without reducer): 469 g/L (3.91 lb/gal).
All VOC values above are theoretical; actual VOC content may vary by batch and when tested using standard methods.
Mixing & reduction
- Standard mix ratio (Base : Converter : Thinner) by volume: 100 : 40 : 60 (with T0002 or T0003).
- Alternative expression: 2.5 : 1 by volume (Base : Converter), then add 40 % thinner.
- Recommended application methods: air atomized (conventional, HVLP, air assisted airless according to the applicator guide).
- Reducer options: T0002 or T0003 (OT0003). T0003 is recommended generally; T0002 is advised for small-scale applications.
Achievable gloss levels and mix ratios
By intermixing OJ0300 and OJ0301, the following approximate gloss ranges at 60° can be achieved:
- Matt / Flat (0–15 gloss units): 100 parts OJ0300 / 0 parts OJ0301.
- Satin (16–30 gloss units): 60 parts OJ0300 / 40 parts OJ0301.
- Semi-gloss (31–60 gloss units): 30 parts OJ0300 / 70 parts OJ0301.
- Gloss (61–85 gloss units): 0 parts OJ0300 / 100 parts OJ0301.
The mix ratios above are advisory. Actual gloss may show slight deviations, so spraying a test panel for customer approval is recommended before full-scale application.
Application parameters
- Recommended coats: 2 full coats of Awlcraft CS to achieve the specified DFT.
- Spray equipment: air atomized.
- Typical air atomization setup:
- Fluid tip: 1.20–1.40 mm (47–55 thou).
- Air pressure at gun: 2–2.4 bar (29–35 psi).
- Application notes:
- Do not use electrostatic spray application.
- All loose parts must be isolated or taped off to protect from overspray.
- In tent applications, an airflow of 0.5–0.6 m/s (1.64–1.96 ft/s) is recommended.
- Cutting-in lines can be expected on large-scale applications.
Substrate compatibility and surface preparation
- Designed over: Awlcraft SE Basecoat.
- Also applicable over: sanded Awlgrip Topcoat, Awlgrip HDT and Awlcraft 2000.
- Preparation over Awlcraft SE Basecoat: keep the basecoat surface clean at all times before Awlcraft CS application (follow Awlcraft SE Technical Datasheet recommendations).
- Preparation over Awlgrip Topcoat / Awlgrip HDT / Awlcraft 2000:
- Sand topcoat with P400 to remove gloss.
- Clean with Surface Cleaner T0170 (US/AP) or T0340 (EU) using the two-cloth wipe-down method.
- Mixing: Do not use the product unless it is thoroughly mixed with the curing agent at the specified ratio.
- Application environment:
- Avoid painting in direct sunlight.
- Avoid applying late in the evening; condensation during overnight cure can cause loss of gloss.
- Allow to dry in a well-ventilated area.
- Temperature limits:
- Substrate temperature: 5–30 °C (41–86 °F).
- Product temperature: 15–35 °C (59–95 °F).
- Ambient temperature: 5–30 °C (41–86 °F in earlier TDS, 41–95 °F in later TDS versions).
Recoatability & drying times
Values refer to unsanded Awlcraft CS overcoated using T0003 reducer.
| Temperature |
Touch dry |
Hard dry |
Pot life |
| 15 °C (59 °F) |
5 hours |
6 hours |
90 minutes |
| 25 °C (77 °F) |
3 hours |
5 hours |
90 minutes |
| 35 °C (95 °F) |
2 hours |
3 hours |
60 minutes |
| Temperature |
Minimum overcoat time |
Maximum overcoat time |
Overcoated by |
| 15 °C (59 °F) |
8 hours |
24 hours |
Awlcraft CS |
| 25 °C (77 °F) |
6 hours |
24 hours |
Awlcraft CS |
| 35 °C (95 °F) |
6 hours |
24 hours |
Awlcraft CS |
When T0002 is used instead of T0003 for small-scale applications, a maximum overcoating window of 30 minutes between coats is required.
Applications and use cases
- Yacht hulls and superstructures: achieve uniform matt, satin, semi-gloss or gloss finishes over Awlcraft SE, Awlcraft 2000, Awlgrip Topcoat or Awlgrip HDT systems.
- Exterior and interior yacht areas: two-component coating designed for interior and exterior use when used as part of the Awlcraft CS system.
- Custom design effects: protects and finishes special color and effect combinations created with Awlcraft SE basecoat, while allowing fine control over sheen.
- Small parts and large-scale work: suitable for detailing, superstructure sections, and full topsides where a controlled low-gloss aesthetic is required.
- Professional refit yards and OEM builders: targeted at applicators capable of working with Awlgrip finishes and looking for a modern matt clearcoat technology.
FAQ – Awlcraft CS
1. On which basecoats can Awlcraft CS be applied?
Awlcraft CS is designed to be applied over Awlcraft SE Basecoat. It can also be applied over properly sanded Awlgrip Topcoat, Awlgrip HDT and Awlcraft 2000.
2. How many coats are recommended?
The technical data sheet recommends applying two full air-atomized coats at the specified wet film thickness to achieve the correct dry film thickness.
3. How do I obtain a matt or satin finish?
Use Awlcraft CS Low Gloss Base OJ0300 and Medium Gloss Base OJ0301 in the following proportions (before adding converter and thinner): 100 parts OJ0300 for matt/flat (0–15 GU), or 60 parts OJ0300 / 40 parts OJ0301 for satin (16–30 GU) at 60°.
4. Can Awlcraft CS be polished or waxed?
No. For matt and semi-gloss finishes, polishing or waxing will create glossy spots that stand out from the surface. Once an area becomes glossier, the only remedy is to repaint the affected area. Awlcraft CS is not repairable by spot polishing.
5. Is electrostatic application allowed?
No. The product cannot be applied using electrostatic spray application methods.
6. What are the recommended environmental conditions for application?
Substrate temperature should be between 5–30 °C, product temperature between 15–35 °C, and ambient temperature between 5–30/35 °C depending on the data sheet version. Avoid direct sunlight and late-evening application where condensation may affect gloss.
7. How long is the pot life?
Pot life is approximately 90 minutes at 15–25 °C and 60 minutes at 35 °C, after mixing base, converter and thinner.
8. How should Awlcraft CS finishes be cleaned and maintained?
After painting, allow a minimum of 7 days (ideally up to 21 days) before cleaning. Wash only with pH-neutral soap (Awlwash or Awlwash 2.0) and a soft sponge. Avoid mechanical washing equipment, hard brushes, high-pressure steam, excessive rubbing, polishing and waxing, as these can increase gloss and permanently alter appearance.
9. What should I do if I need data not listed here?
Consultar ficha técnica del fabricante.
Section 14 – Transport information
- UN number / ID number: UN1263.
- UN proper shipping name: PAINT RELATED MATERIAL.
- Transport hazard class: Class 3 (flammable liquid).
- Packing group: III.
- Environmental hazards: not classified as hazardous to the environment for transport ("No" indicated for ADR/RID, IMDG, IATA).
- ADR/RID tunnel restriction code: D/E.
- IMDG emergency schedules: F-E, S-E.
- Special precautions for user: within user premises, always transport in closed containers that are upright and secure; ensure that personnel transporting the product know what to do in case of an accident or spillage.
- Transport in bulk according to IMO instruments: not applicable.
Section 8 – Personal protective measures
Exposure controls and general hygiene
- Use only with adequate ventilation. Employ local exhaust or process enclosure to keep airborne contaminants below occupational exposure limits and below lower explosive limits.
- Wash hands, forearms and face thoroughly after handling, before eating, drinking or smoking, and at the end of the work period.
- Contaminated work clothing should not leave the workplace; wash before reuse.
- Ensure eyewash stations and safety showers are available near the work area.
Recommended personal protective equipment (PPE)
- Hand protection:
- Wear chemical-resistant, impervious gloves complying with an approved standard whenever handling the product.
- For frequent or prolonged contact, use gloves with protection class 6 (breakthrough time > 480 minutes according to EN374). Recommended materials: Viton or Nitrile, thickness ≥ 0.38 mm.
- For brief contact, use gloves with protection class ≥ 2 (breakthrough time > 30 minutes according to EN374). Recommended material: Nitrile, thickness ≥ 0.12 mm.
- Replace gloves regularly and immediately if damaged. Glove performance can be reduced by physical or chemical damage or poor maintenance.
- Eye and face protection:
- Use safety eyewear meeting relevant standards when risk assessment indicates potential exposure to liquid splashes, mists, gases or dusts.
- As a minimum, wear safety glasses with side shields if contact is possible, unless higher protection is required.
- Respiratory protection:
- Select a respirator that meets the appropriate standard or certification, based on the hazard and potential exposure.
- Long-term exposure: use an air-supplied half mask.
- Short-term exposure: wear a respirator conforming to EN140 with type A/P2 filter or better.
- Dry sanding, flame cutting or welding of dry paint films can produce hazardous dusts or fumes; wet sanding or flatting is preferred where possible. If local exhaust ventilation cannot adequately control exposure, suitable respiratory protection must be worn.
- Body and skin protection:
- Wear protective clothing selected according to the tasks performed and associated risks.
- When there is risk of ignition from static electricity, wear antistatic protective clothing (including antistatic overalls, boots and gloves) compliant with EN 1149.
- Use appropriate protective footwear and any additional skin protection measures as indicated by the risk assessment.
*Contenido generado por IA
