| Material: | Zinc |
| H measurement: | 30 mm |
Sacrificial anode for Hull & transom anodes, made of zinc to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Plates
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes
| Ref. | Weight | L measurement | A measurement | Medida I | Medida D Ø | Amount* |
|---|---|---|---|---|---|---|
| 00234 | 2 kg | 180 mm | 65 mm | 102 mm | 13x25 mm | 47,02 € |
| 00235 | 2,3 kg | 190 mm | 65 mm | 102 mm | 13x25 mm | 55,41 € |
| 00262/N | 3,6 kg | 200 mm | 100 mm | 100 mm | 11x15 mm | 152,83 € |
Color: Gray
1 X $113.88
