Anti-corrosion protection against galvanic currents in marine environments.
| L measurement: | 210 mm |
| A measurement: | 100 mm |
| H measurement: | 32 mm |
| Medida I: | 110 mm |
| Medida D Ø: | 19x25 mm |
| L measurement: | 210 mm |
| A measurement: | 100 mm |
| H measurement: | 32 mm |
| Medida I: | 110 mm |
| Medida D Ø: | 19x25 mm |
Sacrificial anode for Hull & transom anodes, made of zinc to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Plates
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes
| Ref. | Weight | Material | Referencia recambio original | Amount* |
|---|---|---|---|---|
| 00238 | 4,18 kg | Zinc | B-4 | 150,85 € |
| 00238AL | 1,8 kg | Aluminio | 52,60 € |
Color: Gray
1 X $113.88
