THINNER PP VARNISH EXTRA

What it is and why choose it

Epifanes Thinner for PP Varnish Extra is a dedicated acetone-based thinner designed specifically for use with Epifanes PP Varnish Extra. It is formulated to adjust the viscosity of the two-component varnish for both brushing and spraying, helping to optimize flow and leveling while maintaining the performance of the coating system.

Main features

• Purpose-built thinner for Epifanes PP Varnish Extra systems.
• Suitable for brush and spray application of PP Varnish Extra, as indicated in the varnish technical datasheet.
• Fast-evaporating, acetone-based solvent to support quick drying of the varnish system.
• Colorless liquid with characteristic odor; does not add color to clear varnish systems.
• High solvent power to adjust viscosity when PP Varnish Extra is difficult to apply or starts to “pull”.
• Fully miscible with water, which facilitates cleaning of small spills with suitable absorbents and washing solutions in professional environments.
• Classified as a highly flammable liquid and vapor (Flam. Liq. 2, H225) and must be handled and stored accordingly.

Technical specifications

• Product name: Epifanes Thinner for PP Varnish Extra
• Brand: Epifanes
• Main component: Acetone (CAS 67-64-1)
• Physical state: Fluid liquid
• Color: Colorless
• Odor: Characteristic
• Boiling range: 55.8–56.6 °C
• Melting point: -94.7 °C
• Flash point: -19 °C (DIN 51755)
• Ignition temperature: 465 °C (DIN 51794)
• Explosion limits in air: 2.6 – 13 vol %
• Vapor pressure (20 °C): 233 hPa
• Density (20 °C): 0.791 g/cm³ (DIN 51757)
• Dynamic viscosity (20 °C): 32 mPas
• Solubility in water: Fully miscible
• Organic solvents: 100 %
• VOC content: 791.0 g/l
• Classification (GHS): Flam. Liq. 2 H225; Eye Irrit. 2A H319; STOT SE 3 H336

Applications and use cases

Use with Epifanes PP Varnish Extra

• Brush application: Listed in the PP Varnish Extra datasheet as the recommended “Thinner brush” (fast) for Epifanes PP Varnish Extra.
• Spray application: Listed as the recommended “Thinner spray” for Epifanes PP Varnish Extra, including for air-spray systems.
• Viscosity adjustment on bare wood systems: The PP Varnish Extra sheet specifies thinning ratios such as 25 % for the first penetrating coat on teak and 30–40 % for other woods, as well as 0–10 % for subsequent coats. Thinning depends on product temperature and working conditions; overthinning should be avoided.
• Improving application when the varnish “pulls”: When PP Varnish Extra is difficult to apply and starts to pull, the technical datasheet allows the addition of approximately 10 % thinner.
• Guidelines for spray application of the varnish: For air spray, the PP Varnish Extra sheet indicates 10–25 % thinning with Epifanes Thinner for PP Varnish at 1.2–1.6 mm nozzle size and 2–2.5 bar pressure.

FAQ

1. 1. What is Epifanes Thinner for PP Varnish Extra used for?

   It is used to thin Epifanes PP Varnish Extra for brush and spray application, adjust viscosity and improve flow according to the varnish technical datasheet.

2. 2. Can I use this thinner with other Epifanes products?

   The documentation specifies this thinner for Epifanes PP Varnish Extra. For other products, Consultar ficha técnica del fabricante.

3. 3. How much thinner should I add to PP Varnish Extra?

   The PP Varnish Extra datasheet mentions, for example, 25 % thinning for the first coat on teak, 30–40 % for the first coat on other woods, 0–10 % for subsequent coats, about 10 % if the product pulls, and 10–25 % for air-spray. Always follow the full system instructions and avoid overthinning.

4. 4. Is this thinner fast or slow evaporating?

   It is an acetone-based thinner with a low boiling range (around 56 °C) and a flash point of -19 °C, indicating fast evaporation.

5. 5. Is Epifanes Thinner for PP Varnish Extra flammable?

   Yes. It is classified as a highly flammable liquid and vapor (Flam. Liq. 2, H225) and must be kept away from heat, sparks, open flames and hot surfaces.

6. 6. Can I clean tools with this thinner?

   The safety data sheet allows the use of water with cleansing agents for cleaning packaging. For tool cleaning, Consultar ficha técnica del fabricante.

7. 7. Does this thinner affect the color of the varnish?

   The product is described as a colorless liquid, so it does not introduce its own color into the clear varnish system.

8. 8. Is the product harmful to water?

   The safety data sheet rates it as slightly hazardous for water (water hazard class 1) and states that undiluted product or large quantities must not reach ground water, water courses or sewage systems.

9. 9. What should I do in case of skin or eye contact?

   In case of skin contact, rinse immediately with water. In case of eye contact, rinse the opened eye for several minutes under running water and consult a doctor if symptoms persist.

10. 10. How should I store Epifanes Thinner for PP Varnish Extra?

    Store only in the original, tightly sealed container, in a cool, dry and well-ventilated location, away from heat and direct sunlight and from sources of ignition.

Section 14 – Transport information

• UN number: UN1263
• UN proper shipping name (DOT): Paint related material / Consumer commodity, ORM-D
• UN proper shipping name (ADR): 1263 Paint related material (vapour pressure at 50 °C not more than 110 kPa)
• UN proper shipping name (IMDG): Paint related material / Consumer commodity, ORM-D
• UN proper shipping name (IATA): Paint related material
• Transport hazard class: Class 3 – Flammable liquids
• Packing group: II
• Marine pollutant: No
• Kemler code (ADR): 33
• EMS code (IMDG): F-E, S-E
• Stowage category: B
• Typical quantity limitations (DOT): 60 L on passenger aircraft/rail; 220 L on cargo aircraft only.
• Excepted quantities (ADR): Code E2 – 30 ml max. per inner packaging; 500 ml max. per outer packaging.
• Limited quantities (IMDG): 5 L
• Excepted quantities (IMDG/IATA): Code E1 – 30 ml max. per inner packaging; 1000 ml max. per outer packaging.

Section 8 – Personal protective measures

Exposure controls and individual protection

• General hygiene measures: Keep away from food, beverages and feed. Remove soiled clothing immediately. Wash hands before breaks and at the end of work. Avoid contact with eyes and skin.
• Respiratory protection: For brief exposure or low pollution, use an appropriate respiratory filter device. For intensive or longer exposure, use respiratory protective equipment independent of ambient air. The safety data sheet specifies filter type AX.
• Hand protection: Wear protective gloves that are impermeable and resistant to the product. Suitable materials include nitrile rubber, PVC or Viton gloves (thickness > 0.35 mm, permeation > 480 min to EN374) for permanent contact, and butyl rubber gloves (approx. 0.7 mm thickness, > 480 min breakthrough time to EN374).
• Eye/face protection: Use tightly sealed safety goggles.
• Engineering controls: Ensure good ventilation or local exhaust at the workplace and prevent the formation of aerosols.
• Fire and explosion protection: Keep away from heat, sparks, open flames and hot surfaces. Do not smoke. Protect against electrostatic charges and keep suitable respiratory protection available.

*Contenido generado por IA