SIASERIE 1948 15-HOLE DISC

What it is and why choose it

The Sia SIASERIE 1948 siaflex Automotive abrasive is a flexible and versatile sanding solution designed for both wet and dry applications. As an all-round series, it delivers outstanding results across all available grits in a wide variety of automotive sanding tasks, from stock removal to fine finishing, while maintaining a good surface finish and long service life.

Main features

• High performance for stock removal with good finish.
• Highly flexible backing, easily adaptable to contours and complex shapes.
• Minimal clogging thanks to open coating in the 220 – 600 grit range.
• Long lifetime for efficient, continuous sanding.
• Suitable for general use in both dry and wet sanding operations.
• Versatile all-round product with an attractive range of grit options.

Technical specifications

• Product series: 1948 siaflex Automotive
• Grit type: Blue-fired / white aluminium oxide
• Grit range: 40; 60–1500
• Backing: Latex paper (FSC™-certified)
• Coating: Electrostatic P040 – P180; electrostatic open P220 – P600; electrostatic 800
• Bonding: Resin over resin
• Special coating: Stearate P180 – 800
• Technology: Open coating; Plain; S Performance; siafast; siasoft

Applications and use cases

Typical sanding tasks

• Sanding of coatings and impurities.
• Sanding out unevenness at the edges of repaired surfaces.
• Flatting of bodyfiller and primer filler.
• Fine sanding of primer filler.
• Keying of old and new lacquers.
• Removal of orange peel effect and dust inclusions.

Suitable materials

• Colour and primer filler.
• Bodyfiller.
• Lacquer and old lacquer.
• Primer coat, epoxy primer coat and cathodic dip primer coat.
• Plastics and acrylic glass.
• Gelcoat polyester.
• Glass-fibre reinforced plastic (GRP) and composite materials.
• Aluminium and steel.

FAQ

1. What type of sanding is the 1948 siaflex suitable for?

The 1948 siaflex is suitable for both wet and dry sanding applications.

2. Which grit range is available in this series?

The series covers a wide grit range of 40 and 60–1500.

3. What abrasive grain does it use?

It uses blue-fired / white aluminium oxide as the grit type.

4. On which materials can I use 1948 siaflex?

It can be used on colour, primer filler, bodyfiller, lacquer, old lacquer, various primer coats (including epoxy and cathodic dip), plastics, acrylic glass, gelcoat polyester, glass-fibre reinforced plastic (GRP), composite, aluminium and steel.

5. Why does it offer minimal clogging?

Minimal clogging is achieved thanks to the open coating in the 220 – 600 grit range and the stearate special coating in P180 – 800.

6. What are the advantages of the latex paper backing?

The latex paper backing is highly flexible, allowing the abrasive to adapt to contours and complex shapes.

7. Is 1948 siaflex designed only for automotive use?

The document describes a variety of automotive applications, where it is used as an all-round sanding solution.

8. What type of bonding is used?

The abrasive uses a resin-over-resin bonding system.

9. Does the product deliver a good surface finish?

Yes, it is described as providing high performance for stock removal with a good finish.

Section 14: Transport information

Consultar ficha técnica del fabricante.

Section 8: Individual protection measures

Consultar ficha técnica del fabricante.

*Contenido generado por IA