What is NAUTICCLEAN 12 POLISH PRO-MEDIUM and why choose it
NAUTICCLEAN 12 POLISH PRO-MEDIUM is a professional, new-generation polishing compound from NauticClean, based on POLYGRADTM micro-crystal abrasives. It is a fine, silicone-free abrasive specifically developed to restore dull gelcoats and paints, delivering a high-gloss, impeccable finish. It can be applied manually, but for optimal results it is designed to be used with a polishing machine.
Main features
- Professional polish with POLYGRADTM micro-crystal abrasive technology.
- Fine abrasive for controlled polishing performance.
- Silicone-free formulation.
- Designed to restore dull gelcoat and painted surfaces.
- Leaves a high-gloss, shiny finish.
- Recommended application with polisher and medium-hard foam pad.
- Can be finished afterwards with P11 PRO-ULTRA FINE for maximum gloss and protection.
- Available packaging: 500 ml (16.9 oz) and 1 l (33 oz).
Technical specifications
- Product name: P12 Pro-Medium
- Article number: NCP12
- Physical state: viscous
- Colour: white
- Odour: aromatic
- pH (20 °C): approximately 9
- Density (20 °C): approximately 1 g/cm³
- Viscosity, dynamic (20 °C): approximately 30,000 mPas
- Cut level: Consultar ficha técnica del fabricante.
- Gloss level: Consultar ficha técnica del fabricante.
- Composition (indicative):
- Aliphatic hydrocarbons: ≥15 – <30 %
- Non-ionic surfactants: <5 %
- Preservation agents: Benzisothiazolinone, Methylisothiazolinone
- Perfumes.
- Storage conditions: keep container tightly closed and protected from cold, frost, UV rays and heat in a ventilated place; protect from direct sunlight.
Applications and use cases
- Restoration of dull or weathered gelcoat finishes.
- Polishing painted surfaces where a fine abrasive and high-gloss finish are required.
- Intermediate step in a multi-stage polishing process, followed by P11 PRO-ULTRA FINE for enhanced gloss and protection.
- Professional maintenance of marine and other coated surfaces using a polishing machine.
Instructions for use
- Shake the bottle if necessary before use. Consultar ficha técnica del fabricante.
- Apply P12 PRO-MEDIUM with a polisher equipped with a medium-hard foam pad.
- Work the product over the surface with the polisher until the desired finish is obtained. Consultar ficha técnica del fabricante.
- For a perfect high-gloss finish and additional protection, apply and polish afterwards with P11 PRO-ULTRA FINE.
FAQ
1. On what types of surfaces can NAUTICCLEAN 12 POLISH PRO-MEDIUM be used?
It is developed to restore dull gelcoats and paints.
2. Is the product silicone free?
Yes. The formulation is explicitly described as silicone free.
3. Do I need a polishing machine to use this polish?
The product can be applied manually, but for a perfect and optimal result the use of a polisher is recommended.
4. What type of pad should I use with the polisher?
Use a medium-hard foam pad with the polishing machine.
5. How do I achieve maximum gloss and protection?
After polishing with P12 PRO-MEDIUM, it is recommended to apply P11 PRO-ULTRA FINE to obtain a perfect high-gloss finish and added protection.
6. How should I store NAUTICCLEAN 12 POLISH PRO-MEDIUM?
Keep the container tightly closed, protected from cold, frost, UV rays and heat, in a well-ventilated place and away from direct sunlight.
7. Does the product require special first-aid measures?
No special measures are generally required. In case of inhalation, provide fresh air; in case of eye contact, rinse with water; if symptoms persist after ingestion or exposure, consult a doctor.
8. Is the product classified as dangerous under CLP regulation?
According to the safety data sheet, the product is not classified under Regulation (EC) No 1272/2008 (CLP).
9. What is the pH of the product?
The pH at 20 °C is approximately 9.
10. Can small residual quantities be disposed of with household waste?
Yes, small amounts can be disposed of with domestic waste, following local regulations.
Section 14 – Transport information
- UN number: Consultar ficha técnica del fabricante.
- UN proper shipping name: Consultar ficha técnica del fabricante.
- Transport hazard class: Consultar ficha técnica del fabricante.
- Packing group: Consultar ficha técnica del fabricante.
- Environmental hazards: according to the safety data sheet, not applicable.
- Special precautions for user: not applicable as indicated in the safety data sheet.
- Bulk transport according to MARPOL Annex II and IBC Code: not applicable.
Section 8 – Personal protective measures
- General safety and hygiene measures: observe standard safety measures when handling chemical products.
- Respiratory protection: not required under normal conditions of use.
- Hand protection:
- Use protective gloves made of material that is impermeable and resistant to the product.
- The choice of glove material should consider breakthrough time, permeability and degradation and must be confirmed with the glove manufacturer.
- Eye protection: the use of safety goggles is recommended during transfer or handling of the product.
- Body protection: use suitable protective clothing.
*Contenido generado por IA
