What NAUTICCLEAN 13 POLISH PRO-CUT is and why choose it
NAUTICCLEAN 13 POLISH PRO-CUT is a professional, new-generation polishing compound based on POLYGRAD™ abrasive micro-crystals. It is designed for heavy cut tasks on dull and chalky gelcoats and paints, restoring a glossy finish while remaining silicone free. For users who need powerful defect removal together with a bright surface appearance, P13 PRO-CUT offers a high cut effect combined with a glossy finish.
Main features
- High cut effect: Formulated for heavy polishing and material removal on dull and chalky surfaces.
- New-generation POLYGRAD™ abrasives: Micro-crystal technology ensures effective abrasion and polishing performance.
- Silicone free: Contains no silicones, helping to avoid surface contamination.
- Glossy finish: Despite its strong cutting power, it leaves a bright, glossy appearance.
- Professional use: Developed as a professional polish and polishing material.
- Versatile application: Can be used with a polishing machine or manually.
- Optimised polishing system: Manufacturer advises using P12 PRO-MEDIUM followed by P11 PRO-ULTRA FINE after P13 PRO-CUT for higher gloss and protection.
Technical specifications
- Product name: P13 PRO-CUT
- Article number: NCP13
- Function: Preserving agent and polishing material
- Physical state: Viscous
- Colour: White
- Odour: Aromatic
- pH (20 °C): ca. 9
- Density (20 °C): ca. 1.3 g/ml (Spanish SDS) / ca. 1.24 g/ml (English label)
- Dynamic viscosity (20 °C): ca. 30,000 mPas
- Flash point: > 65 °C
- Solubility in water: Partially miscible
- Cut level: High (scale shown up to 10)
- Gloss level: Medium to high (scale shown up to 10)
- Composition highlights: Contains ≥ 15 – <30% aliphatic hydrocarbons; <5% non-ionic surfactants; preservation agents (Benzisothiazolinone, Methylisothiazolinone); perfumes.
- Regulatory note: The product is not classified according to Regulation (EC) No 1272/2008 (CLP).
Packaging and references
- NCP13-500: Bottle 500 ml / 16.9 oz
- NCP13-1: Bottle 1 l / 33 oz
Applications and use cases
- Polishing dull gelcoats: Suitable for restoring heavily weathered or chalky gelcoat finishes.
- Renovating faded paints: Developed to cut back and brighten very dull, aged or chalky paintwork.
- Heavy defect removal: Appropriate for heavy cut work where strong abrasive action is required before refining with finer polishes.
- Professional maintenance cycles: Used as the first step in a multi-stage polishing system, followed by P12 PRO-MEDIUM and P11 PRO-ULTRA FINE for higher gloss and improved protection.
Instructions for use
- Work on clearly defined areas.
- Apply P13 PRO-CUT to the surface. It can be spread with a brush, a polishing pad on the machine while stopped, or by hand.
- Machine application: Use a polisher equipped with a soft foam pad. Polish until the desired result is achieved, then finish with a very soft microfibre.
- Manual application: Start with a soft polishing cloth, then finish with a microfibre towel.
- Although manual work is possible, a polisher is recommended to obtain an optimal, perfect result.
FAQ
What type of product is NAUTICCLEAN 13 POLISH PRO-CUT?
It is a professional heavy-cut polish based on POLYGRAD™ abrasive micro-crystals, intended for polishing dull and chalky gelcoats and paints.
Does P13 PRO-CUT contain silicone?
No, P13 PRO-CUT is silicone free.
Can I use this polish by hand?
Yes. It can be applied manually using a soft polishing cloth and finished with a microfibre towel. However, using a polisher is recommended for a perfect result.
Which pad should I use with a polisher?
The manufacturer indicates the use of a soft foam pad with a polisher, followed by a very soft microfibre for finishing.
On which surfaces can I use P13 PRO-CUT?
It is suitable for dull and chalky gelcoats and paints.
What finish can I expect?
The product offers a high cut effect and leaves a glossy finish.
How should I store NAUTICCLEAN 13 POLISH PRO-CUT?
Keep the container tightly closed, protected from cold, frost, heat and direct sunlight, and store in a ventilated place.
Is P13 PRO-CUT classified as dangerous according to CLP?
No. According to the supplied safety data, the product is not classified under Regulation (EC) No 1272/2008 (CLP).
What products are recommended after using P13 PRO-CUT?
The manufacturer advises applying P12 PRO-MEDIUM followed by P11 PRO-ULTRA FINE to achieve a perfect high-gloss finish and high protection.
Section 14 – Transport information
- UN number: Not assigned (suppressed in ADR, ADN, IMDG, IATA tables).
- Official transport name: Not specified (suppressed).
- Transport hazard class: Not classified as a transport dangerous good under ADR, ADN, IMDG or IATA.
- Packing group: Not applicable / suppressed.
- Environmental hazards: Not applicable; not classified as dangerous for the environment for transport purposes.
- Special precautions for user: Not applicable according to the safety data sheet.
- Bulk transport according to MARPOL Annex II and IBC Code: Not applicable.
Section 8 – Personal protective measures
- General hygiene measures: Follow standard safety practices for handling chemical products.
- Respiratory protection: Not required under normal conditions of use.
- Hand protection: Use protective gloves made of material that is impermeable and resistant to the product. The exact breakthrough time and material must be confirmed with the glove manufacturer.
- Eye protection: Protective goggles are recommended during product transfer.
- Skin and body protection: Wear protective clothing.
*Contenido generado por IA
