NON SKID COARSE

What is ALEXSEAL NON SKID COARSE and why choose it?

ALEXSEAL Non Skid Coarse (A5007) is a solvent-free, transparent paint auxiliary designed to create coarse non-skid textures on surfaces coated with ALEXSEAL topcoats. Supplied as a solid additive, it is mixed directly into the topcoat or applied by sprinkling to achieve durable anti-slip finishes on areas where enhanced grip and safety are required. The product is intended for professional, industrial serial painting applications.

Main features

• Non-skid performance: Specifically developed to achieve non-skid textures on coated surfaces.
• Coarse texture: A5007 provides a coarse anti-slip profile and can be blended with ALEXSEAL Non Skid Fine (A5003) for intermediate textures.
• Transparent additive: Does not add color; the appearance is determined by the ALEXSEAL topcoat used.
• Flexible application methods: Suitable for spray application, brush/roller incorporation, or sprinkling onto a sticky topcoat layer.
• Solvent-free auxiliary: Classified as a solvent-free paint auxiliary agent with no hazardous ingredients according to the supplied safety data sheet.
• For professional use: Designed for controlled industrial and professional environments.

Technical specifications

• Trade name: ALEXSEAL A5007 – Non Skid Coarse
• Product type: Paint auxiliary agent, solvent-free
• Intended use: Industrial serial painting; creation of non-skid textures on surfaces requiring anti-skid properties
• Color: Transparent
• Physical state: Solid (20 – 25 °C, 1,013 hPa)
• Odour: Weak
• Density: 0.9 g/cm³ (20 °C)
• Water solubility: Practically insoluble; immiscible with water
• Flash point: > 340 °C
• Recommended storage temperature: 5 – 35 °C in a dry, cool, well-ventilated place
• Packaging (typical): 1/2 gal (1.98 lb)
• Chemical stability: Stable under normal conditions; no decomposition if stored and applied as directed.
• Substrate pre-treatment: Same as for ALEXSEAL Premium Topcoat 501 / Acrylic Topcoat X.
• Coverage: Same as the ALEXSEAL Topcoat used.
• Optimal application environment: 15 °C (60 °F) / 40% RH to 30 °C (85 °F) / 80% RH.

Mixing and dosage

• Mixing ratio with topcoat: See TDS for ALEXSEAL Premium Topcoat 501 / Acrylic Topcoat X.
• Adjusting texture:
  • The degree of skid texture can be varied by mixing ALEXSEAL Non Skid Coarse (A5007) with ALEXSEAL Non Skid Fine (A5003).
  • Example for medium non-skid texture (most preferred): 1 part ALEXSEAL Non Skid Coarse + 1 part ALEXSEAL Non Skid Fine.
• Spray application dosage: For 1 gallon of mixed topcoat, add 1 – 1.5 quarts of ALEXSEAL Non Skid.
• Brush and roller dosage: For 1 gallon of mixed topcoat, add 0.8 – 1 quart of ALEXSEAL Non Skid.
• Sprinkling dosage: As desired.

Application methods

• General: See TDS for ALEXSEAL Premium Topcoat 501 / Acrylic Topcoat X.
• Spray application:
  • Add ALEXSEAL Non Skid to the mixed topcoat in the specified quantity.
  • Apply by cross-coat spraying.
  • Recommended fluid nozzle size: 1.5 – 1.8 mm (0.059 – 0.07 in).
• Brush or roller application:
  • Add ALEXSEAL Non Skid to the mixed topcoat in the specified quantity.
  • Apply evenly by brush or roller over the designated area.
• Sprinkling application:
  • Apply the mixed topcoat to the designated area by brush or roller to obtain a sticky layer.
  • Make small holes in the transparent plastic lid of the ALEXSEAL Non Skid container to use it as a salt-shaker type dispenser.
  • Sprinkle ALEXSEAL Non Skid onto the still-tacky paint film.
  • Allow 10–20 minutes for the particles to dry firmly into the topcoat, until the paint film is slightly dry but still sticky.
  • Apply additional coats of ALEXSEAL Topcoat over the treated surface; some applications may require two finish coats.

Applications and use cases

• Non-skid zones on coated surfaces: Any ALEXSEAL topcoated area where anti-skid properties are required.
• Industrial serial painting lines: Integration into professional coating processes where consistent non-skid textures must be produced.
• Adjustable grip levels: Combination with ALEXSEAL Non Skid Fine for customized, medium or intermediate textures suited to different areas.

FAQ

1. Is ALEXSEAL NON SKID COARSE classified as a hazardous product?

   No. According to Regulation (EC) No. 1272/2008, it is not classified as a hazardous substance or mixture and requires no hazard pictograms, signal words or hazard statements.

2. What kind of surfaces can I treat with this product?

   It is intended for surfaces where anti-skid properties are required and is used within industrial serial painting processes in combination with ALEXSEAL topcoats.

3. Can I adjust how rough or fine the non-skid texture is?

   Yes. The skid texture can be varied by mixing ALEXSEAL Non Skid Coarse (A5007) with ALEXSEAL Non Skid Fine (A5003). An example for a medium non-skid grade is 1 part Coarse + 1 part Fine.

4. How much ALEXSEAL NON SKID COARSE should I add to the topcoat?

   For spray application, use 1 – 1.5 quarts per gallon of mixed topcoat. For brush or roller application, use 0.8 – 1 quart per gallon of mixed topcoat. For sprinkling, the amount is as desired.

5. Which ALEXSEAL products can be used with NON SKID COARSE?

   It is designed to be used with ALEXSEAL Premium Topcoat 501 and Acrylic Topcoat X, following the corresponding technical data sheets.

6. What is the recommended environment for application and drying?

   The optimal application range is from 15 °C (60 °F) / 40% relative humidity up to 30 °C (85 °F) / 80% relative humidity.

7. Is the product water-soluble?

   No. ALEXSEAL NON SKID COARSE is practically insoluble and immiscible in water.

8. Does the additive change the color of the topcoat?

   No. The additive itself is transparent; the final color is determined by the chosen ALEXSEAL topcoat.

9. What is the shelf life of ALEXSEAL NON SKID COARSE?

   Consultar ficha técnica del fabricante.

10. How should unused product and packaging be disposed of?

    Dispose of product and uncleanable packaging in accordance with local regulations and in agreement with the regional waste disposal company.

Section 14 – Transport information

• UN number / ID number (ADR / IMDG / IATA): Not regulated as a dangerous good.
• UN proper shipping name: Not regulated as a dangerous good.
• Transport hazard class(es): Not regulated as a dangerous good.
• Packing group: Not regulated as a dangerous good.
• Environmental hazards: Not classified as dangerous for the environment according to the transport regulations.
• Transport within user’s premises: Always transport in closed, upright and safe containers. Ensure that personnel handling the product know how to act in case of incident or spillage.
• Maritime bulk transport according to IMO instruments: Not applicable for the product as supplied.

Section 8 – Individual protection measures

Exposure controls and personal protective equipment

• Occupational exposure limits: The mixture contains no substances with occupational exposure limit values.
• Eye/face protection: Safety glasses.
• Hand protection:
  • Use chemical-resistant protective gloves tested in compliance with EN 374.
  • Suitable materials for short-term contact (splash protection): nitrile rubber or neoprene.
  • Minimum material thickness: > 0.4 mm.
  • Breakthrough time: > 480 minutes.
  • Replace gloves immediately if damaged or worn. Follow the glove manufacturer’s instructions for use, storage, care and replacement.
• Skin and body protection: Clothing as usual in the chemical industry.
• Respiratory protection: Effective dust mask, especially when dust is generated.
• Hygiene measures: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and after work. Keep away from food and drink; do not eat, drink or smoke while using the product.

*Contenido generado por IA*