COMPLETE SILICONE MASK SERIES 6000

What is the 3M COMPLETE SILICONE MASK SERIES 6000 and why choose it

The 3M COMPLETE SILICONE MASK SERIES 6000 is a reusable full facepiece respirator available in three sizes that combines a lightweight silicone face mask with a wide range of compatible filters and air supply options. Thanks to the 3M bayonet connection system, it can be used with twin light filters, powered air respirators or air supplied systems to protect against gases, vapours and particles according to individual needs.

The soft silicone face seal, balanced design and low-maintenance construction make this full face mask a practical solution for demanding work where respiratory and eye protection are required.

Main features

• Reusable full face mask with low maintenance requirements.
• Lightweight and well balanced design.
• Soft silicone faceseal and oronasal piece for comfort during long work periods.
• 3M bayonet connection system compatible with a wide range of twin filters, powered air equipment and air supply units.
• Twin filter design for better weight distribution.
• Three sizes available: small (6700), medium (6800), large (6900).
• Optional prescription spectacle kit available (6878).
• Facepiece weight: 400 g.

Technical specifications

Models and sizes

• 6700: Small.
• 6800: Medium.
• 6900: Large.

Nominal protection factors with filters and systems

Configuration	Nominal protection factor
With P1 particle filters	5
With P2 particle filters	15
With P3 particle filters	1000
With class 1 gas and vapour filters	2000 or 1000 ppm (whichever is lower)
With class 2 gas and vapour filters	2000 or 5000 ppm (whichever is lower)
With 3M Versaflo TR-602E/TR-802E powered air respirator	2000
With approved 3M air supply units	Consultar ficha técnica del fabricante.

The nominal protection factor (NPF) is derived from the maximum total inward leakage allowed by the relevant European standards for a given respiratory protective device class. It might not represent the level of protection realistically achievable in the workplace. Many countries apply assigned protection factors (APF) that may differ from the NPF.

Standards and approvals

• Full face mask 3M Series 6000: EN 136:1998 Class 1.
• With powered air: EN 12942:1998 + A2:2008 (with approved powered air units).
• With air supply units: EN 14594:2005 (with approved air supply units).
• Relevant performance requirements of EN 166:2001 for eye protection against high speed particles, medium energy.

Gas and vapour filters compatibility

Filter	Standard	Class	Risk
6051 (06911)	EN 14387:2004 + A1:2008	A1	Organic vapours with boiling point > 65 °C
6055 (06915)	EN 14387:2004 + A1:2008	A2	Organic vapours with boiling point > 65 °C
6054	EN 14387:2004 + A1:2009	K1	Ammonia and derivatives
6057	EN 14387:2004 + A1:2010	ABE1	Organic vapours (boiling point > 65 °C), inorganic vapours and acid gases
6059	EN 14387:2004 + A1:2011	ABEK1	Organic vapours (boiling point > 65 °C), inorganic vapours, acid gases, ammonia and derivatives
6075	EN 14387:2004 + A1:2012	A1 + formaldehyde	Formaldehyde and organic vapours with boiling point > 65 °C
6091	EN 14387:2004 + A1:2013	A1P3 R	Organic vapours (boiling point > 65 °C) and particles
6092	EN 14387:2004 + A1:2014	ABEK1P3 R + formaldehyde	Organic vapours (boiling point > 65 °C), inorganic vapours, acid gases, ammonia and derivatives, formaldehyde up to 10 ppm and particles
6095	EN 14387:2004 + A1:2015	A2P3 R	Organic vapours (boiling point > 65 °C) and particles
6096	EN 14387:2004 + A1:2016	A1E1HgP3 R	Organic vapours (boiling point > 65 °C), acid gases, mercury and particles
6051i / 6055i	EN 14387:2004 + A1:2017	A1 / A2 with 3M end-of-service-life indicator	Organic vapours with boiling point > 65 °C
6098	EN 14387:2004 + A1:2017	AXP3 R	Single-component organic vapours with boiling point < 65 °C and particles
6099	EN 14387:2004 + A1:2017	A2B2E2K2HgP3 R	Organic vapours (boiling point > 65 °C), inorganic vapours, acid gases, ammonia and derivatives, mercury, formaldehyde up to 10 ppm and particles

Particle filters compatibility

Filter	Standard	Class	Risk
5911	EN 143:2000/A1:2006	P1 R	Non-volatile solid and liquid particles
5925 (06925)	EN 143:2000/A1:2006	P2 R	Non-volatile solid and liquid particles
5935	EN 143:2000/A1:2006	P3 R	Non-volatile solid and liquid particles
2125	EN 143:2000/A1:2006	P2 R	Non-volatile solid and liquid particles
2135	EN 143:2000/A1:2006	P3 R	Non-volatile solid and liquid particles
2128	EN 143:2000/A1:2006	P2 R	Non-volatile solid and liquid particles, additional protection against ozone up to 10 x OEL, and nuisance levels of acid gases/organic vapours
2138	EN 143:2000/A1:2006	P3 R	Non-volatile solid and liquid particles, additional protection against ozone up to 10 x OEL, and nuisance levels of acid gases/organic vapours
6035	EN 143:2000/A1:2006	P3 R	Non-volatile solid and liquid particles, in hard plastic housing for demanding applications
6038	EN 143:2000/A1:2006	P3 R	Non-volatile solid and liquid particles, in hard plastic housing for demanding applications, hydrogen fluoride up to 30 ppm and additional protection against nuisance levels of organic vapours and acid gases below OEL

Breathing tube options

Breathing tube	3M Versaflo TR-602E/TR-802E powered air	3M S-200+ air supply unit
BT-63 / BT-64	Yes	Consultar ficha técnica del fabricante.
S-222	Consultar ficha técnica del fabricante.	Yes

Materials

Part	Material
Mask	Silicone rubber
Head harness	Polyethylene
Inhalation valve	Polyisoprene
Exhalation valve	Silicone rubber
Seal gasket	Silicone rubber
Lens	Polycarbonate

Service life

Indicative shelf life of the mask: 5 years from date of manufacture when stored under the conditions described on the packaging. These data are indicative only and subject to external, uncontrolled factors, and must not be interpreted as a warranty.

Spare parts

Part number	Description
6895	Inhalation gasket
6893	Inhalation valves
7583	Exhalation valve
6864	Central adapter assembly
6896	Central port adapter gasket
6897	Head harness assembly
6898	Visor frame
6885	Visor protectors (x25)
6878	Prescription spectacle kit
7883	Neck strap
501	Retainer for 5000 series filters
603	Platform for 5000 series filters
105	Cleaning wipe for masks
S-200+	Air supply regulator

Cleaning and storage

1. Disassemble by removing filters or breathing tube (if applicable), the face seal, central adapter, visor, head harness and oronasal piece.
2. Clean and disinfect the mask (except filters) with 3M 105 Cleaning Wipe or by immersion in warm soapy water and scrubbing with a soft brush. Components can also be cleaned in a domestic washing machine. If necessary, clean the outside of the breathing tube with warm water containing a mild detergent and make sure all connections are free from dirt or debris.
3. For disinfection, use a solution of a quaternary ammonium disinfectant, sodium hypochlorite or another suitable disinfectant.
4. Rinse with clean warm water and air dry in non-contaminated atmospheres.

The water temperature must not exceed 50 °C. Do not use cleaning agents containing lanolin or other oils. Do not autoclave. The polycarbonate visor has an abrasion-resistant coating, but abrasive cleaners and strong solvents can damage it. Avoid acetone, methyl ethyl ketone, toluene, methylene chloride and other strong solvents.

Applications and use cases

The 3M COMPLETE SILICONE MASK SERIES 6000 is designed for use with appropriate 3M filters to protect against:

• Non-volatile solid and liquid particles.
• Organic vapours with boiling point above 65 °C.
• Single-component organic vapours with boiling point below 65 °C (with suitable AX filters).
• Inorganic vapours and acid gases.
• Ammonia and its derivatives.
• Formaldehyde (with specified filters, up to indicated ppm levels).
• Mercury vapours (with specified filters).
• Ozone (with specified particle filters providing additional ozone protection).
• Hydrogen fluoride (with specified filters).

The actual suitability of the mask for a given workplace depends on the selection of the correct filter, adherence to relevant standards and guidelines and correct fitting and use.

FAQ

Which sizes are available for the 3M COMPLETE SILICONE MASK SERIES 6000?

The mask is available in three sizes: small (6700), medium (6800) and large (6900).

Is the mask reusable?

Yes, it is a reusable full face mask with low maintenance requirements when cleaned and stored as recommended.

What type of connection system does the mask use?

It uses the 3M bayonet connection system, compatible with a wide range of twin filters, powered air systems and air supply units from 3M.

What is the weight of the facepiece?

The facepiece weighs approximately 400 grams.

Does the mask provide eye protection?

Yes, the polycarbonate lens meets relevant performance requirements of EN 166:2001 for protection against high speed particles, medium energy.

Is there an option for prescription glasses?

Yes, a prescription spectacle kit (part number 6878) is available.

What is the nominal protection factor with P3 particle filters?

When used with P3 particle filters, the nominal protection factor is 1000.

How long is the shelf life of the mask?

The indicative shelf life is 5 years from the date of production when stored according to the conditions described on the packaging.

Which powered air systems are compatible?

The mask can be used with 3M Versaflo TR-602E/TR-802E powered air respirators and with approved 3M air supply units such as S-200+.

How should the mask be cleaned?

Remove filters, wash the mask with warm soapy water or use 3M 105 cleaning wipes, rinse with clean water and allow to air dry in a non-contaminated atmosphere. Do not exceed 50 °C and do not use strong solvents.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Consultar ficha técnica del fabricante.

Contenido generado por IA