3M filter for gases, vapors, and particles, designed for use with reusable masks featuring a bayonet connection, providing respiratory protection in environments with airborne contaminants. Its key advantage is its compatibility with 3M™ reusable masks that use the bayonet filter connection system. Please consult the manufacturer's technical data sheet.
*AI-generated content*
| Presentation: | Bag |
| Protección: | ABEK2P3 |
| Num. units: | 2 |
| Presentation: | Bag |
| Protección: | ABEK2P3 |
| Num. units: | 2 |
The 3M gas, vapour and particulate filters with bayonet connection are designed to be used on 3M reusable half masks and full face masks equipped with the 3M bayonet filter connection. This ABEK2P3 configuration belongs to the family of filters for gases, vapours and particles, developed to offer a high level of respiratory protection when correctly selected, fitted and used for the intended application.
The bayonet connection system allows quick and secure mounting on compatible 3M reusable masks, helping to ensure a stable fit during work. According to the 3M technical data sheet, these bayonet filters are part of a complete range that includes particulate-only filters and combination filters for gases, vapours and particles, allowing you to configure the appropriate protection for different workplace contaminants.
The following nominal and assigned protection factors are given in the technical data sheet for 3M bayonet filters when used with compatible half masks and full face masks:
The nominal protection factor (FPN) is derived from the maximum total inward leakage allowed in the relevant European standards. The actual level of respiratory protection in the workplace depends on correct selection, fitting and use of the equipment, and many countries apply assigned protection factors (APF) according to EN 529:2005 and national workplace guidance.
For 3M gas, vapour and combination filters with bayonet connection, the technical data sheet indicates the following materials:
Specific material data for the 3M ABEK2P3 configuration: Consultar ficha técnica del fabricante.
Specific storage life and expiry information for 3M ABEK2P3: Consultar ficha técnica del fabricante.
These 3M bayonet filters for gases, vapours and particles are intended to be used by competent professionals who have previous experience with this type of respiratory protection product. Before using the product in any application, 3M recommends performing tests to validate the performance of the filter in the expected conditions of use.
Typical use cases for the family of gas, vapour and particulate filters include environments where both airborne particles and hazardous gases or vapours may be present, always within the limits and conditions defined by the relevant standards and national regulations. The exact suitability of the ABEK2P3 configuration for a specific contaminant or concentration must be confirmed.
Detailed application guidance for 3M ABEK2P3, including specific contaminants and concentration limits: Consultar ficha técnica del fabricante.
The technical data sheet specifies that 3M bayonet filters for reusable masks can be used only with 3M masks equipped with a bayonet-type connection, such as 3M 6000, 6500 and 7500 reusable half masks and 3M 6000 full face masks.
Gas and vapour filters for 3M reusable masks must be replaced according to an established change schedule and the applicable governmental regulations, or earlier if the contaminant can be detected inside the mask by smell or taste.
Particulate filters in the 3M reusable range must be replaced when breathing becomes difficult or uncomfortable (this varies from person to person), or when the filter becomes dirty or physically damaged.
No. The product must not be immersed in water or any liquid during cleaning. Only the plastic components of the filter may be cleaned using 3M Face Seal Cleaner 105.
According to the data sheet, 3M gas and vapour filters for reusable masks and 3M gas, vapour and particulate filters of the 6000 series comply with EN 14387:2004 + A1:2008.
The general storage life is up to 5 years from the date of production when stored under the conditions described on the packaging, except for models 2128, 2138 and 6038, which have a 3-year storage life. This value is indicative and must not be considered a guarantee.
Yes. The document stresses that respiratory protection is only effective if the product is correctly selected, fitted and used throughout the entire period of exposure to respiratory hazards.
Consultar ficha técnica del fabricante.
*Contenido generado por IA
| Ref. | Amount* |
|---|---|
| 6099 | 61,68 € |
