The 3M™ 6059 ABEK1 filter is a gas and vapour filter for 3M™ reusable masks with bayonet connection. It is designed to protect against organic vapours (bp >65 °C), inorganic vapours, acid gases, ammonia and its derivatives when used with compatible 3M™ half and full-face masks. Its ABEK1 classification offers combined multi-gas protection in a single filter.
*Contenido generado por IA
| Presentation: | Package |
| Capacity: | 2 uds |
| Protección: | ABEK1 |
| Num. units: | 2 |
| Presentation: | Package |
| Capacity: | 2 uds |
| Protección: | ABEK1 |
| Num. units: | 2 |
The 3M 6059 ABEK1 filter for organic vapors is a gas and vapor filter from the 3M 6000 series, designed to be used with 3M reusable masks equipped with bayonet-type connections. It provides ABEK1 level protection against a wide range of organic vapors with a boiling point above 65 °C, as well as inorganic vapors, acid gases, ammonia and its derivatives. Manufactured according to European standard EN 14387:2004 + A1:2008, it is suitable for users who need combined protection against multiple gaseous contaminants when used within an appropriate respiratory protection program.
The 3M 6059 ABEK1 filter is intended for use in environments where protection is required against a combination of:
It must always be used as part of a complete 3M reusable respiratory mask with bayonet connection and within an established change-out program and applicable regulatory framework.
It provides ABEK1 protection against organic vapors with a boiling point greater than 65 °C, inorganic vapors, acid gases, ammonia and its derivatives.
It complies with the European standard EN 14387:2004 + A1:2008 for gas and vapor filters.
It can be used only with 3M masks equipped with a bayonet-type connection, such as 3M 6000, 6500 and 7500 reusable half masks and 3M 6000 full-face masks.
No, it is a gas and vapor filter. For particle protection, it must be used in combination with appropriate particle filters if applicable. Consultar ficha técnica del fabricante.
The storage life is 5 years from the date of production when stored under the conditions described on the packaging.
It should be replaced according to the established change-out program and applicable governmental regulations, or earlier if the contaminant can be detected inside the mask by smell or taste.
No. The product must not be immersed in water or liquid during cleaning. Only the plastic components of filters may be cleaned with 3M Face Seal Cleaner 105.
The filters use adsorbent carbon, polyester and polypropylene.
For class 1 gas and vapor filters, the nominal protection is the lowest of the country-specific protection factors or 1000 ppm for both half masks and full-face masks, as indicated in the technical data.
Consultar ficha técnica del fabricante.
Consultar ficha técnica del fabricante.
| Ref. | Amount* |
|---|---|
| 6059 | 22,54 € |