The 3M™ 6055 is a gas and vapour filter for reusable 3M™ masks with bayonet connection, providing A2 level protection against organic vapours with a boiling point above 65 °C. It is part of the 3M™ 6000 series and meets the European standard EN 14387:2004 + A1:2008 for gas and vapour filters.
*Contenido generado por IA
| Presentation: | Package |
| Capacity: | 2 uds |
| Protección: | A2 |
| Num. units: | 2 |
| Presentation: | Package |
| Capacity: | 2 uds |
| Protección: | A2 |
| Num. units: | 2 |
The 3M 6055 gas and vapor filter is part of the 3M 6000 Series of bayonet filters for reusable respirators. Classified as an A2 filter according to EN 14387:2004 + A1:2008, it is designed for protection against organic vapors with a boiling point higher than 65 °C. Thanks to its bayonet connection, it is compatible with a wide range of 3M half and full-face reusable masks equipped with this type of connector, offering a flexible and professional-grade respiratory protection solution.
The 3M 6055 A2 filter is intended for professional environments where respiratory protection against organic vapors with boiling point above 65 °C is required. It must be selected, fitted and used as part of a complete respiratory protection program by competent personnel.
Typical uses include situations where workers may be exposed to organic vapors, always within the limits and conditions specified by the applicable standards, national guidelines and workplace risk assessment.
Filters must be replaced according to an established change-out schedule, following governmental regulations or earlier if the contaminant is detectable inside the mask by smell or taste.
It can be used only with 3M reusable masks that have a bayonet-type connection, such as 3M 6000, 6500 and 7500 half masks and 3M 6000 full-face masks.
It provides A2 protection against organic vapors with a boiling point higher than 65 °C, within the limits defined by EN 14387:2004 + A1:2008 and applicable national guidelines.
Replace it according to your established change-out schedule and governmental regulations, or earlier if the contaminant can be detected inside the mask by smell or taste.
No. The product must not be immersed in water or any liquid during cleaning. Only the plastic components of the filters may be cleaned with 3M Face Seal Cleaner 105.
The storage life is up to 5 years from the date of production when stored under the conditions described on the packaging. This is an indicative maximum value and not a guarantee.
No. The nominal protection factor is derived from laboratory performance and may not reflect the real level of protection in the workplace. Many countries apply assigned protection factors and additional workplace guidance.
It is intended for professional users who have prior experience with this type of product and who operate within an appropriate safety and respiratory protection program.
Before use, check the expiry date on the product, ensure it is correctly selected for the intended application, fitted properly to a compatible mask and used in accordance with relevant safety rules and procedures.
*Contenido generado por IA
| Ref. | Amount* |
|---|---|
| 6055 | 21,34 € |
