GMA 131 NON SKIP AGGREGATE

GMA 131 Non Slip Aggregate – Marine Anti-Slip Additive for Coatings

1. What it is and why choose it

GMA 131 Non Slip Aggregate by International Marina is a granular additive designed to be mixed with compatible marine coatings to create a durable non-slip surface. When incorporated into the paint system, it increases surface roughness and traction, helping to reduce the risk of slipping on decks, walkways and other trafficked areas on boats and marine structures. Available as a filter sand in the 300–500 micron range and typically supplied in 0.5 kg packaging, it is suitable for light, medium or heavy traffic depending on the coating system used (information based on publicly available technical literature and may not be fully up to date or verified; always check the official technical data sheet).

2. Main features

• Non-slip aggregate additive for marine and industrial coatings to provide an anti-slip finish on horizontal surfaces.
• Granular filter sand with a particle size range of approximately 300–500 microns, designed to add texture without excessively altering the appearance of the coating.
• Compatible with selected high-performance coatings from the International range (for example, some epoxy and polyurethane systems; specific compatibilities must be confirmed in the official product documentation).
• Suitable for different traffic levels (from light to heavy pedestrian traffic) when used in an appropriate multi-coat system, according to manufacturer recommendations.
• Marine-focused formulation, commonly used on yacht and commercial vessel decks, ramps and other wet or exposed areas.
• Pack size around 0.5 kg, convenient for mixing into small to medium coating quantities (value indicative from distributor information and not manufacturer-verified).

3. Technical specifications

The following points are compiled from distributor and third-party technical information and may not be fully verified. For precise and binding values, consult the official technical data sheet from International Marina / International Protective Coatings.

• Product type: Non Slip Aggregate (anti-slip mineral aggregate for paints).
• Appearance: Granular sand-like particles.
• Approximate particle size: 300–500 microns (non-verified, based on distributor descriptions).
• Typical packaging: Approx. 0.5 kg per container (non-verified, based on distributor descriptions).
• Recommended use: Additive to specific compatible coating systems to achieve a non-slip finish.
• Brand: International Marina / International (marine coatings range).

4. Applications and use cases

• Boat and yacht decks: To increase grip on walkways, cockpits, flybridges and other deck areas exposed to water and spray.
• Ramps, stairs and access areas: Mixed into appropriate coatings to reduce slip hazards on inclined or stepped surfaces.
• Working platforms and industrial marine areas: For zones with regular foot traffic where improved traction is required.
• Wet or exposed zones: Areas subject to rain, waves or occasional oil and grease where a textured surface helps to improve safety.
• Touch-up of existing non-slip surfaces: In maintenance operations where worn non-slip coatings need to be renewed using compatible International systems.

5. Frequently Asked Questions (FAQ)

What is GMA 131 Non Slip Aggregate used for?

It is used as an additive in selected marine and industrial coatings to create a textured, non-slip finish on decks, ramps, walkways and other trafficked surfaces.

How is GMA 131 typically applied?

In general, the aggregate is either mixed into the coating before application or broadcast onto a wet coating layer and then sealed with additional coats. The exact procedure, mixing ratios and number of coats must be taken from the official technical data sheet of the coating system.

Which paints or coatings is it compatible with?

Public technical literature indicates compatibility with a limited range of high-performance International coatings (for example, certain epoxy and polyurethane products). However, the exact list of compatible products and systems must be confirmed in the current official documentation from International.

Can it be used for heavy traffic areas?

Information from third-party technical documents suggests that systems containing GMA 131 can be suitable for light, medium or heavy pedestrian traffic, depending on the full coating system design. Always follow the manufacturer’s guidance for system build-up and use conditions.

Does it change the colour of the coating?

As a mineral aggregate, GMA 131 mainly adds texture. It may slightly influence the visual appearance or gloss level of the coating, but the final effect depends on the coating type, colour and application method.

What is the approximate grain size of GMA 131?

Distributor information mentions a filter sand with a grain size of about 300–500 microns. This value is indicative and not manufacturer-verified; only the official technical data sheet can provide confirmed specifications.

Is GMA 131 suitable for exterior marine environments?

Yes, it is intended for use in marine coating systems, typically on external decks and structures exposed to weather and seawater, provided it is used within a compatible coating system designed for such environments.

How much GMA 131 should I add to the paint?

The correct dosage depends on the coating type, application method and desired level of texture. Specific mixing ratios must be obtained from the official technical documentation of the aggregate and the chosen coating.

Can GMA 131 be used on metal, GRP or wood?

In many marine applications, it is used over primers and intermediate coats applied on steel, aluminium, GRP or wood. Suitability for each substrate depends on the full coating system and must be confirmed with the manufacturer.

Where can I find the official technical and safety information?

For authoritative and up-to-date information on performance, application, safety and environmental aspects, you should consult the official technical data sheet (TDS) and safety data sheet (SDS) issued by International / International Marina.

14. Transport information

Specific, verified transport classification data (such as UN number, transport hazard class, packing group or marine pollutant status) for GMA 131 Non Slip Aggregate could not be confirmed from the publicly available secondary sources used for this description. As a solid mineral aggregate additive, it is often not classified as dangerous for transport under typical regulations, but this cannot be guaranteed without the official safety data sheet.

For accurate transport information, including any applicable ADR/RID, IMDG or IATA classifications, packaging and labelling requirements, consult the latest official safety data sheet (SDS) provided by International / International Marina and follow all local and international transport regulations.

8. Personal protective measures

Detailed and verified occupational safety recommendations for GMA 131 Non Slip Aggregate are not fully available in the secondary sources consulted. However, as a general guideline for handling mineral aggregates and powdered or granular additives, the following basic precautions are commonly recommended. These are generic indications and must not replace the official safety data sheet:

• Eye protection: Use suitable safety glasses or goggles to avoid irritation from dust or splashes of mixed coating.
• Respiratory protection: When handling the dry aggregate or sanding cured non-slip coatings, use an appropriate dust mask or respirator if dust generation cannot be avoided.
• Skin protection: Wear protective gloves and suitable work clothing to minimize direct skin contact with the aggregate and liquid coatings.
• Hygiene measures: Wash hands and exposed skin after use and before eating, drinking or smoking. Avoid breathing dust and avoid contact with eyes.
• Workplace practices: Handle in well-ventilated areas and minimize dust formation during mixing or application.

For precise and binding information on personal protective equipment (PPE), exposure limits and safe handling, always refer to the official safety data sheet (SDS) from the manufacturer and comply with local occupational health and safety regulations.

*Contenido generado por IA