VC GENERAL THINNER

What is VC General Thinner and why choose it?

VC General Thinner is a universal solvent specifically formulated for thinning all International VC products and for cleaning application equipment. It is also suitable for re-dissolving and removing VC 17m coatings when required. With controlled solvent strength, good compatibility across the VC range and clear usage and safety information, it is an essential companion product for professional maintenance of VC antifouling systems.

Main features

• Universal VC thinner: Designed for use with all VC products.
• VC 17m removal: Re-dissolves and helps remove existing VC 17m films when necessary.
• Equipment cleaner: Effective for cleaning application tools and equipment after use.
• Clear, colour code YTA600: Transparent solvent for easy visual control during use.
• Optimised solvent balance: Specific gravity approx. 0.89–0.892 g/cm³ and VOC content 892 g/l (as supplied).
• Professional-grade formulation: Classified as a flammable liquid with defined safety and handling guidance.
• Good compatibility: Can be employed on all VC products and for surface wipe-down before application.

Technical specifications

• Product type: Thinner / solvent
• Intended use: Thinning VC products; cleaning application equipment; re-dissolving/removing VC 17m
• Colour: YTA600 – transparent / colourless
• Specific gravity / density: approx. 0.89–0.892 g/cm³
• Volume solids: 0%
• VOC (as supplied): 892 g/l
• Unit size: 1 litre container
• Typical shelf life: 2 years
• Flash point: 23°C (closed cup, Pensky-Martens)
• Boiling point: approx. 120°C
• Physical state: Liquid
• Water solubility: Not soluble / immiscible
• Explosion limits (1-methoxypropan-2-ol): approx. 1.48% – 13.74% (v/v)
• Storage temperature range: 5°C to 35°C
• Recommended storage conditions: Cool, dry, well ventilated area, away from direct sunlight and sources of ignition; containers tightly closed.
• Product code / SDS code: YTA600

Applications and use cases

Compatible products and substrates

• Compatibility: Can be used with all International VC products.
• Specific use on VC 17m: Re-dissolves VC 17m and can be used to remove VC 17m where required.

Typical uses

• Thinning VC coatings: Adjusts product viscosity where thinning is specified for application.
• Surface wipe-down: When used for surface cleaning prior to coating, the cloth should be turned frequently to avoid re-applying residues.
• Equipment cleaning: Cleans spray guns, rollers, brushes and other equipment used with VC products.

Application hints

• Ventilation and humidity control: Ensure adequate ventilation during use.
• Handling: Avoid contact with skin and eyes and avoid breathing vapours or mist. Use only in well ventilated areas.
• Restrictions: No special restrictions are highlighted, but the product is restricted to professional users in regulatory classifications.

FAQ

1. What is VC General Thinner used for?

   It is used to thin all VC products where necessary, to clean application equipment and to re-dissolve or remove VC 17m coatings.

2. Can I use this thinner with products outside the VC range?

   The documentation states compatibility with all VC products. For other coatings, Consultar ficha técnica del fabricante.

3. How should I use it for surface cleaning?

   When wiping down surfaces, keep turning the cloth frequently to avoid re-depositing dissolved residues.

4. What storage conditions are recommended?

   Store in the original, tightly closed container in a cool, dry, well ventilated place between 5°C and 35°C, away from direct sunlight and sources of heat or ignition.

5. Is VC General Thinner flammable?

   Yes. It is classified as a flammable liquid (Flam. Liq. 3) with a flash point of 23°C. Keep away from sparks, open flames and hot surfaces and do not smoke nearby.

6. What is the typical shelf life?

   The typical shelf life is 2 years under recommended storage conditions.

7. Can remaining product or containers be disposed of with normal household waste?

   No. Remainders must not be disposed of via municipal waste routes or into drains or watercourses. Disposal has to follow local regulations and may require agreement with the competent authorities.

8. Is this product suitable for consumer use?

   Regulatory information indicates the product is restricted to professional users.

9. What should I do in case of accidental ingestion?

   Do not induce vomiting. Immediately call a poison centre or doctor. Aspiration into the lungs can be fatal.

10. Where can I find detailed safety data?

    Consultar ficha técnica del fabricante.

Section 14 – Transport information

• UN number / ID: UN1263
• Proper shipping name (ADR/RID, IMDG, IATA): PAINT RELATED MATERIAL
• Transport hazard class: Class 3 (flammable liquid)
• Packing group: III
• Environmental hazards (IMDG/IATA): Not classified as marine pollutant in the transport information provided.
• ADR tunnel code: (D/E)
• Emergency schedules (IMDG): F-E, S-E
• Special precautions for user: Within user premises, always transport in closed, upright, secure containers and ensure personnel know the procedure in case of accident or spillage.
• Bulk transport according to IMO instruments: Not applicable.

Section 8 – Personal protective measures

The following individual protection measures are indicated for handling VC General Thinner, especially in professional and industrial environments:

• Ventilation and engineering controls: Use only with adequate ventilation. Employ local exhaust or process enclosure to keep airborne concentrations below occupational exposure limits and below lower explosion limits. Use explosion-proof ventilation equipment.
• Hand protection: Wear chemical-resistant, impervious gloves.
  • For prolonged or frequently repeated contact: gloves with protection class 6 (breakthrough time > 480 minutes according to EN374), recommended materials: Viton or nitrile, thickness ≥ 0.38 mm.
  • For brief contact: gloves with protection class ≥ 2 (breakthrough time > 30 minutes according to EN374), recommended material: nitrile, thickness ≥ 0.12 mm.
  • Replace gloves regularly and whenever signs of damage appear.
• Eye and face protection: Wear chemical splash goggles meeting an approved standard when there is any risk of splashes or mists. If a higher level of protection is needed, follow the results of the risk assessment.
• Body protection: Select protective clothing based on the tasks and risks, and have it approved by a specialist. Where ignition from static electricity is possible, use anti-static protective clothing (overalls, boots and gloves) in line with EN 1149.
• Other skin protection: Use appropriate footwear and additional skin protection as required by the specific task.
• Respiratory protection: Where ventilation is insufficient or exposure limits may be exceeded, wear a respirator conforming to EN140 with an A/P2 filter or better, selected as part of a respiratory protection programme.
• Hygiene measures: Wash hands, forearms and face thoroughly after handling and before eating, drinking or smoking. Remove contaminated clothing and protective equipment before entering eating areas and wash contaminated garments before reuse.