AUTOSOL® HIGH PERFORMANCE MARINE SUPER GLOSS POLISH

What is AUTOSOL® High Performance Marine Super Gloss Polish and why choose it?

AUTOSOL® High Performance Marine Super Gloss Polish is a professional-grade finishing polish designed to deliver an exceptionally high-gloss, mirror-like finish on marine fiberglass, gelcoat and painted surfaces. Developed as a second-step polish after compounding, it is tailored to remove fine swirl marks, holograms and light sanding traces while enhancing colour depth and surface clarity. Its silicone-free, filler-free formula makes it suitable for both professional yards and demanding boat owners who need a clean, high-quality finish that does not mask defects.

Main features

• Designed for marine applications on fiberglass, gelcoat and painted surfaces.
• Removes swirl marks, holograms and light sanding scratches (up to approx. P3000 grit).
• Leaves the highest level of gloss with an exceptional mirror-like shine.
• Enhances colour depth for a rich, deep appearance.
• Dust-free and fast-working formulation for efficient polishing.
• Silicone-free and with no fillers, helping to avoid defect masking and compatibility issues with subsequent coatings.
• Works well on both new/freshly cured and thoroughly cleaned surfaces.
• Recommended as step two after AUTOSOL® High Performance Marine Compound for a complete polishing system.

Technical specifications

The following information is based on manufacturer literature and an official Safety Data Sheet (SDS). Local classifications and details may vary by region and are not fully verified for all jurisdictions. Always refer to the latest official technical and safety documentation from AUTOSOL® for confirmation.

• Product type: High-gloss marine finishing polish.
• Appearance: White fluid.
• Odour: Characteristic.
• Typical application step: Second step after compounding (finishing polish).
• Suitable substrates: Fiberglass, gelcoat and painted surfaces (marine use).
• Silicone content: Silicone-free (no filler added).
• pH: Approx. 8.2 at 20 °C.
• Specific gravity: Approx. 1.0 at 20 °C.
• Water solubility: Partly miscible.
• Boiling point: > 100 °C at 100 kPa (approx.).
• Flash point: > 65 °C (GHS Flammable Category 4; C1 combustible classification noted in the SDS).
• Product form: Liquid polish, typically supplied in bottle format (e.g. 1 L according to some distributors; packaging sizes may vary and should be confirmed with your supplier).

For precise, up-to-date values and regulatory classifications in your country, consult the latest official AUTOSOL® technical data sheet (TDS) and SDS.

Applications and use cases

AUTOSOL® High Performance Marine Super Gloss Polish is intended as a finishing polish in marine detailing and maintenance processes:

Typical applications

• Finishing step after machine compounding on gelcoat and marine paints.
• Refining surfaces after sanding with fine abrasives (up to approx. P3000 grit), to remove remaining sanding haze.
• Eliminating holograms and swirl marks created in prior polishing stages.
• Enhancing gloss and colour depth on new or thoroughly cleaned fiberglass and painted marine surfaces.

Example use cases

• Detailing of yachts, sailing boats and motorboats, focusing on hull and superstructure finishes.
• Maintenance polishing of gelcoat to restore clarity and shine after exposure to weathering.
• Professional finishing work in boatyards and marine service centres, where a high-gloss, silicone-free result is required.

Usage method (pad selection, machine speed, number of passes, etc.) is not fully detailed in the available documentation and should be defined according to professional practice, surface condition and equipment used.

FAQ – AUTOSOL® High Performance Marine Super Gloss Polish

1. What type of product is this polish?

It is a high-performance, silicone-free finishing polish formulated for marine fiberglass, gelcoat and painted surfaces, used primarily as a second step after compounding.

2. Can it remove heavy oxidation or deep scratches?

No. It is designed for fine finishing and the removal of swirl marks, holograms and light sanding scratches (around P3000). For heavy oxidation or deeper defects, a dedicated cutting compound, such as AUTOSOL® High Performance Marine Compound, should be used first.

3. Is it suitable for new or freshly painted surfaces?

Yes. Manufacturer information indicates it is suitable for both fresh and cured surfaces, including new or thoroughly cleaned gelcoat and paint.

4. Does it contain silicone or fillers?

No. The product is described as silicone-free and without fillers, helping ensure that the finish reflects the true condition of the surface.

5. On which materials can I use it?

It is intended for all fiberglass, gelcoat and painted marine surfaces. Always test on an inconspicuous area first when working on unusual or sensitive finishes.

6. Is the product flammable?

According to the SDS consulted, it has a flash point greater than 65 °C and is classified as GHS Flammable Category 4 / C1 combustible in that document. However, it is not classified as a Dangerous Good for transport under ADG, IATA or IMDG criteria. These classifications may differ in other regions and should be verified locally.

7. Can I use it by hand, or do I need a machine polisher?

The manufacturer literature referenced does not specify application equipment in detail. In practice, finishing polishes are often used with rotary or dual-action polishers and appropriate pads; manual use may be possible for small areas, but this should be evaluated by the user.

8. Is it safe for the environment?

The SDS indicates that there is insufficient data to fully assess ecological behaviour. As with any chemical product, avoid releasing it into the environment and follow local regulations for waste disposal.

9. Where can I find complete safety information?

Complete and authoritative safety information is available in the official AUTOSOL® Safety Data Sheet (SDS) and technical documents. Always consult the latest versions provided by the manufacturer or your distributor.

10. Are all the data here fully verified for my country?

No. Some information, such as hazard classifications and regulatory references, comes from an SDS prepared for the Australian and New Zealand markets and may differ in your country. Always verify with the official AUTOSOL® documentation and local regulations.

Section 14 – Transport information (summary)

The following transport information is taken from an SDS version issued in July 2025 for High Performance Marine Super Gloss Polish. It may not exactly match classifications in all countries or under all transport regulations and should therefore be treated as a non-exhaustive summary.

• UN number: Not assigned. The product is stated as not classified as a Dangerous Good by ADG, IATA or IMDG/IMSBC criteria.
• Transport classification: Not regulated as Dangerous Goods under the transport codes referenced in the SDS (for the jurisdictions covered by that document).
• Special conditions: The SDS notes that no special transport conditions are necessary unless required by other regulations. Normal good practice still applies (securely closed containers, prevention of leakage, protection from excessive heat, etc.).

Important: This transport summary is not fully verified for your specific region or for all versions of the product. Always refer to the latest official AUTOSOL® SDS and comply with local transport regulations.

Section 8 – Personal protection measures (summary)

The information below is extracted and condensed from the SDS for High Performance Marine Super Gloss Polish. It is intended as a general guide and may not cover all situations. Employers and professional users must perform their own risk assessment and follow local occupational safety regulations.

General guidance

• Use the product only in well-ventilated areas. If natural ventilation is insufficient, auxiliary ventilation (such as fans) is recommended.
• For occasional handling of small quantities under normal conditions, the SDS indicates that no special equipment is usually required; however, appropriate protective measures are recommended for regular or bulk use.

Recommended personal protective equipment (PPE)

• Eye/face protection: Protective glasses or goggles are recommended when using the product, especially in professional or bulk-handling environments.
• Skin protection – hands and body: Avoid prolonged or repeated skin contact. The SDS recommends suitable impervious, elbow-length gloves and facial protection for extended handling. Suggested glove/clothing materials include nitrile and Viton.
• Respiratory protection: Under normal conditions of use, a respirator is usually not required. If vapours or mists may build up or if ventilation is inadequate, a suitable respirator should be selected according to relevant standards and regulations.
• Additional safety equipment: Where practical in commercial settings, safety deluge showers should be available near handling areas.

Note: The PPE recommendations above are based on an SDS prepared to Australian standards and may not be fully verified for other jurisdictions. Always check the official AUTOSOL® SDS applicable to your country and follow local health and safety laws.

For complete and definitive information on properties, handling, PPE and transport, it is strongly recommended to consult the official AUTOSOL® technical data sheet (TDS) and Safety Data Sheet (SDS) for AUTOSOL® High Performance Marine Super Gloss Polish.

*Contenido generado por IA