What is BOSTIK COFIX and why choose it?
BOSTIK COFIX (COFIX S RED) is a red, solvent-based adhesive formulated as a mixture of hydrocarbons and methyl ethyl ketone. Designed for professional applications, it offers a viscous liquid consistency and fast evaporation profile, making it suitable where a highly flammable, quick-drying adhesive is required. The product also contains nanoforms and provides good handling when used under appropriate safety and ventilation conditions.
Main features
- Type: Solvent-based adhesive mixture (contains hydrocarbons C6–C7 and methyl ethyl ketone).
- Appearance: Red, viscous liquid with solvent odour.
- Fast-drying system: Initial boiling point around 60 °C and low flash point (-20 °C, closed cup) support rapid solvent evaporation.
- Solid content: Approximately 19.5% by weight.
- Highly flammable: Classified as Flammable Liquid Category 2 (H225); forms flammable/explosive vapour–air mixtures during use.
- Health hazards: Causes skin irritation (H315) and serious eye irritation (H319); may cause drowsiness or dizziness (H336). Repeated exposure may cause skin dryness or cracking (EUH066).
- Environmental profile: Classified as toxic to aquatic life with long-lasting effects (H411); harmful to aquatic life is also noted.
- Allergenic components: Contains rosin and methylols which may produce an allergic skin reaction (EUH208).
- Professional-grade handling: Requires good ventilation, explosion-proof equipment and appropriate personal protective equipment (PPE).
- Recommended use: Adhesive applications as specified in the safety data sheet.
Technical specifications
- Product name: COFIX S RED (BOSTIK COFIX)
- Form: Liquid mixture containing nanoforms
- Colour: Red
- Physical state: Viscous liquid
- Odour: Solvent
- Density: Approx. 0.82 g/cm³
- Solid content: 19.5%
- Water solubility: Insoluble in water
- Kinematic viscosity: > 21 mm²/s at 40 °C
- Dynamic viscosity: 450 – 700 mPa·s
- Initial boiling point: About 60 °C
- Flash point: -20 °C (closed cup)
- Flammability limits in air: Lower 1% / Upper 11.5% (v/v)
- Vapour pressure: <110 kPa at 50 °C
- Recommended storage temperature: Between 5 and 25 °C
- Stability: Stable under normal conditions; sensitive to static discharge; no hazardous decomposition products under recommended storage and use.
Applications and use cases
- General adhesive applications: Designed for use as an adhesive in professional and industrial environments where a solvent-based, quick-drying red adhesive is required.
- Situations requiring visible adhesive lines: The red colour helps visually identify application zones and coverage during work.
- Processes needing rapid handling: The low flash point and volatile solvent system support fast evaporation when used with adequate ventilation.
For all applications, follow the handling, storage, and protection measures described in the safety data sheet.
FAQ – BOSTIK COFIX (COFIX S RED)
-
What is BOSTIK COFIX used for?
BOSTIK COFIX (COFIX S RED) is recommended as an adhesive for professional applications.
-
What is the colour and appearance of the product?
It is a red, viscous liquid with a characteristic solvent odour.
-
Is BOSTIK COFIX flammable?
Yes. It is classified as a highly flammable liquid and vapour (Flammable Liquid Category 2, flash point -20 °C) and can form explosive vapour–air mixtures during use.
-
What are the main health hazards?
The product causes skin irritation and serious eye irritation and may cause drowsiness or dizziness. Repeated exposure can cause skin dryness or cracking, and it contains rosin and methylols that may cause an allergic skin reaction.
-
Is the product hazardous to the environment?
Yes. It is toxic to aquatic life with long-lasting effects and is described as harmful to aquatic life. Avoid release into drains, soil or water bodies.
-
How should BOSTIK COFIX be stored?
Store tightly closed in a cool, dry, well-ventilated area, away from heat, sparks, open flames and other ignition sources. Keep between 5 and 25 °C and use only properly labelled containers.
-
Can it be used in poorly ventilated areas?
Use in poorly ventilated areas is not recommended unless adequate local exhaust ventilation and suitable respiratory protection are provided, as vapours can cause drowsiness or dizziness.
-
How should spills be handled?
Evacuate the area, remove ignition sources, provide ventilation and use personal protective equipment. Contain with non-combustible absorbent material (such as sand or earth) and transfer to suitable containers for disposal according to local regulations.
-
How should waste and empty packaging be disposed of?
Waste adhesive and contaminated packaging should be treated as hazardous waste and disposed of in line with local legislation. Empty containers may pose a fire or explosion hazard and must not be cut, punctured or welded.
-
Does the product contain substances of very high concern (SVHC)?
According to the safety data sheet, the product does not contain candidate substances of very high concern at concentrations ≥0.1% as defined by REACH Article 59.
Section 14 – Transport information
BOSTIK COFIX (COFIX S RED) is classified as a dangerous good for transport.
ADR/RID (Road and rail)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Transport hazard class: 3 (flammable liquid)
- Packing group: II
- Description: UN1133, Adhesives, 3, II, (D/E), Environmentally Hazardous
- Environmental hazards: Yes
- Classification code: F1
- Tunnel restriction code: (D/E)
- Special provisions: 640D
- Limited quantity (LQ): 5 L
- ADR Hazard Identification (Kemmler) number: 33
IMDG (Sea transport)
- UN number: UN1133
- UN proper shipping name: Adhesives (Hydrocarbons, C6–C7, n-alkanes, isoalkanes, cyclic, <5% n-hexane)
- Transport hazard class: 3
- Packing group: II
- Description: UN1133, Adhesives (Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclic, <5% n-hexane), 3, II, (-20 °C c.c.), Marine pollutant
- Marine pollutant: Yes (P)
- Limited quantity (LQ): 5 L
- EmS code: F-E, S-D
- Bulk transport under MARPOL/IBC: Not applicable
IATA/ICAO (Air transport)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Transport hazard class: 3
- Packing group: II
- Description: UN1133, Adhesives, 3, II
- Environmental hazards: Yes
- Special provisions: A3
- Limited quantity (LQ): 1 L
- Emergency Response Guide (ERG) code: 3L
Section 8 – Personal protective measures
Engineering controls
- Ensure adequate general and local exhaust ventilation, especially in confined or enclosed areas.
- Extract vapours and aerosols directly at the point of origin.
Recommended personal protective equipment (PPE)
- Eye and face protection: Tight-sealing safety goggles and a face protection shield.
- Hand protection: Protective gloves. Breakthrough time depends on glove material, thickness and temperature.
- Skin and body protection: Antistatic footwear; fire- or flame-resistant/retardant clothing; gloves made of plastic or rubber; suitable protective clothing and apron.
- Respiratory protection: In case of inadequate ventilation or exposure to mist, spray or aerosol, wear suitable respiratory protection. Recommended filter type: organic gases and vapours filter conforming to EN 14387.
Hygiene and environmental measures
- Do not eat, drink or smoke when using the product.
- Wash hands before breaks and after handling.
- Remove contaminated clothing and wash before reuse; do not take contaminated work clothing out of the workplace.
- Prevent release into drains, soil or water bodies.
*Contenido generado por IA
