What is VINYCOL 1520 M2 BASE and why choose it?
VINYCOL 1520 M2 BASE by Bostik is a solvent-based adhesive supplied as a very viscous, colourless liquid. It is formulated for use as an industrial adhesive and is classified as a highly flammable mixture with specific handling and safety requirements. Its composition, based on methyl ethyl ketone and acetone, offers fast-evaporating solvents and a solid content of approximately 19.8%, making it suitable for professional adhesive applications where a strong, quick-drying bond is required.
Main characteristics
- Type: Solvent-based adhesive mixture.
- Appearance: Very viscous, colourless liquid with solvent odour.
- High flammability: Classified as a highly flammable liquid and vapour (Flam. Liq. 2, H225).
- Health hazards: Causes serious eye irritation (Eye Irrit. 2, H319) and may cause drowsiness or dizziness (STOT SE 3, H336).
- Environmental hazard: Harmful to aquatic life with long lasting effects (Aquatic Chronic 3, H412).
- Typical composition: Contains methyl ethyl ketone (40–<60%), acetone (20–<25%) and minor amounts of 1-nitropropane, diisopropylnaphthalene and nitroethane.
- Solid content: Approx. 19.8%.
- Density: About 0.87 g/cm³.
- Storage temperature: Recommended between 5 and 25 °C. Do not freeze.
- Water resistance: Insoluble in water.
Technical specifications
- Product type: Adhesive (mixture).
- Recommended use: Adhesives.
- Physical state: Liquid.
- Colour: Colourless.
- Odour: Solvent.
- Dynamic viscosity: 2300–2900 mPa·s at 20 °C.
- Kinematic viscosity: > 700 mm²/s at 40 °C.
- Density: 0.87 g/cm³.
- Solid content: 19.80%.
- Initial boiling point: 56 °C.
- Flash point: -17 °C.
- Autoignition temperature: 343 °C.
- Flammability limits in air: lower 1.2% (v/v), upper 13% (v/v).
- Vapour pressure: <110 kPa at 50 °C.
- Water solubility: Insoluble.
- Stability: Stable under normal conditions; sensitive to static discharge.
- Recommended storage temperature: 5–25 °C, keep containers tightly closed, cool, dry and well ventilated, away from heat and ignition sources.
- VOC content: Consultar ficha técnica del fabricante.
Applications and use cases
According to the safety documentation, VINYCOL 1520 M2 BASE is intended for use as an adhesive. It is suitable for professional and industrial environments where solvent-based adhesives are required. For detailed suitability with specific substrates or processes, Consultar ficha técnica del fabricante.
FAQ – VINYCOL 1520 M2 BASE
1. What type of product is VINYCOL 1520 M2 BASE?
It is a solvent-based industrial adhesive supplied as a very viscous, colourless liquid.
2. Is the product flammable?
Yes. It is classified as a highly flammable liquid and vapour (Flam. Liq. 2, H225). Keep away from heat, hot surfaces, sparks, open flames and all ignition sources. No smoking.
3. What are the main health hazards?
The product causes serious eye irritation and may cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking.
4. How should VINYCOL 1520 M2 BASE be stored?
Store in tightly closed, properly labelled containers in a cool, dry, well-ventilated area, between 5 and 25 °C, away from heat, sparks, open flames and other ignition sources. Do not freeze and do not store near combustible materials.
5. Can it be discharged to drains?
No. It is harmful to aquatic life with long lasting effects. Prevent product from entering drains, sewers or natural water bodies.
6. What should I do in case of accidental skin contact?
Wash immediately with plenty of water and soap while removing all contaminated clothing and shoes. If irritation persists, seek medical advice.
7. How should spills be handled?
Eliminate ignition sources, ensure ventilation, stop the leak if safe, and absorb the liquid with earth, sand or other non-combustible material. Collect in appropriate containers for disposal according to local regulations.
8. What is the appearance and odour of the product?
VINYCOL 1520 M2 BASE is a very viscous, colourless liquid with a solvent odour.
9. Is the product suitable for consumer use?
The safety data sheet is written for professional and industrial users. It also indicates that if supplied to the general public, tactile warnings are required.
10. Where can I find performance data such as bond strength?
Consultar ficha técnica del fabricante.
Section 14 – Transport information
VINYCOL 1520 M2 BASE is classified as a dangerous good for transport.
ADR/RID (land transport)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Transport hazard class: 3
- Packing group: II
- Description: UN1133, Adhesives, 3, II, (D/E)
- Environmental hazards: No
- Classification code: F1
- Special provisions: 640D
- Tunnel restriction code: (D/E)
- Limited quantity (LQ): 5 L
- ADR hazard identification number (Kemmler): 33
IMDG (sea transport)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Transport hazard class: 3
- Packing group: II
- Description: UN1133, Adhesives, 3, II, (-17 °C c.c.)
- Marine pollutant: NP (not a marine pollutant)
- Special provisions: None
- Limited quantity (LQ): 5 L
- EmS code: F-E, S-D
- Bulk transport (MARPOL/IBC): Not applicable
IATA/ICAO (air transport)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Transport hazard class: 3
- Packing group: II
- Description: UN1133, Adhesives, 3, II
- Environmental hazards: No
- Special provisions: A3
- Limited quantity (LQ): 1 L
- ERG code: 3L
Section 8 – Individual protection measures
Exposure controls
- Engineering controls: Ensure adequate ventilation, especially in confined areas. Vapours and aerosols must be exhausted directly at the point of origin.
Personal protective equipment (PPE)
- Eye and face protection: Tight-sealing safety goggles and face shield complying with EN 166.
- Hand protection: Protective gloves. Breakthrough time depends on glove material, thickness and temperature.
- Skin and body protection: Antistatic footwear and fire/flame-resistant or flame-retardant clothing. Gloves made of plastic or rubber, suitable protective clothing and apron.
- Respiratory protection: In case of inadequate ventilation, wear suitable respiratory protection. For mist, spray or aerosol exposure, use a suitable respirator and protective suit. Recommended filter type: organic gases and vapours filter conforming to EN 14387.
Environmental exposure controls
- Do not allow the product to enter any sewer, the ground or any body of water.
Contenido generado por IA
