What it is and why choose it
MAROCOL B190 (2D480A) by Bostik is a beige, paste-like resin supplied as part of a multi-component adhesive and sealant kit. Classified as non-hazardous under Regulation (EC) 1272/2008 [CLP], it is designed for professional use where a stable, easy-to-handle resin component is required. The product offers high viscosity, good storage stability and a formulation that does not contain substances of very high concern at concentrations above 0.1 percent.
Main features
- Product type: Resin component of a multi-component adhesive and sealant system (PC-ADH-8).
- Physical form: Solid paste, beige colour with a slight odour.
- Classification: Not hazardous according to Regulation (EC) 1272/2008 [CLP].
- Water resistance: Insoluble in water.
- High consistency: Dynamic viscosity of approximately 10000 Pa·s at 23 °C for controlled application.
- Stable formulation: Stable under normal conditions, with no expected hazardous decomposition products during normal use.
- Low environmental concern: Based on available data, the mixture does not meet criteria for PBT, vPvB, PMT or vPvM substances and is not classified as hazardous to the aquatic environment.
- Regulatory compliance: Compiled according to REACH (EC 1907/2006) and CLP (EC 1272/2008); contains no REACH Annex XIV substances and no Annex XVII restricted substances.
- Part of a kit: Supplied as one component in a kit; the other component(s) have their own safety data sheets.
Technical specifications
- Manufacturer: Bostik SA, 51 Esplanade du Général de Gaulle, 92800 Puteaux – La Défense, France.
- Recommended use: Resin.
- Physical state: Solid.
- Appearance: Paste.
- Colour: Beige.
- Odour: Slight.
- Dynamic viscosity: Approx. 10000 Pa·s at 23 °C.
- Density: Approx. 1.80 g/cm³.
- Water solubility: Insoluble in water.
- Physical and chemical hazards: No specific flammability, explosive or reactivity hazards identified based on available data.
- VOC content: Consultar ficha técnica del fabricante.
- Storage temperature: Keep between 10 and 35 °C.
- Storage conditions: Keep container tightly closed in a dry, well-ventilated place.
Composition (selection)
- Fluorite (CaF2): 1 – less than 5 percent.
- Crystalline silica, quartz: 1 – less than 3 percent.
- Titanium dioxide in powder form containing 1 percent or more of particles with aerodynamic diameter ≤ 10 μm: 1 – less than 2.5 percent (classified Carc. 2 H351i at substance level).
- Reaction mass of fatty amide derivatives: 0.1 – less than 0.3 percent (classified Skin Sens. 1B H317 and Aquatic Chronic 3 H412 at substance level).
Applications and use cases
This product is identified for use as a resin and is referenced as a component of multi-component adhesives and sealants (PC-ADH-8). Typical applications include situations where a high-viscosity resin paste is needed as part of a multi-part adhesive or sealant system. For detailed performance characteristics, substrate compatibility and mixing or curing information, Consultar ficha técnica del fabricante.
FAQ
1. Is this product classified as hazardous under CLP?
No. According to Regulation (EC) 1272/2008 [CLP], this mixture is classified as not hazardous.
2. Does it contain any substances of very high concern (SVHC) above 0.1 percent?
No. The safety data sheet states that the product does not contain candidate SVHC substances at concentrations ≥ 0.1 percent.
3. What is the recommended storage temperature?
Store the product between 10 and 35 °C in a tightly closed container in a dry, well-ventilated place.
4. Is the resin soluble in water?
No. The product is described as insoluble in water.
5. What is the physical form and appearance of the product?
It is a solid, beige paste with a slight odour.
6. Is special ventilation required during use?
Ensure adequate ventilation, especially in confined areas, to minimise exposure to any dust or vapours generated during handling.
7. Is the product dangerous for the environment?
Based on available data, the mixture is not classified as hazardous to the aquatic environment and does not meet criteria for PBT, vPvB, PMT or vPvM substances.
8. Can hazardous respirable dust be formed?
Yes. The label includes EUH212: hazardous respirable dust may be formed when used. Do not breathe dust.
9. Is the product supplied as a stand-alone material or part of a kit?
It is part of a kit and is one component in a multi-component adhesive and sealant system. The other component(s) have separate safety data sheets.
10. What should be done with empty containers?
Empty containers should not be reused. Dispose of them in accordance with local regulations and the European Waste Catalogue codes indicated in the safety data sheet.
Section 14 – Transport information
According to the transport section of the safety data sheet, this product is not regulated as a dangerous good for road, sea or air transport.
- ADR/RID (land transport):
- UN number or ID number: Not regulated.
- UN proper shipping name: Not regulated.
- Transport hazard class(es): Not regulated.
- Packing group: Not regulated.
- Environmental hazards: Not applicable.
- Special provisions: None.
- IMDG (sea transport):
- UN number or ID number: Not regulated.
- UN proper shipping name: Not regulated.
- Transport hazard class(es): Not regulated.
- Packing group: Not regulated.
- Marine pollutant: NP (not a marine pollutant).
- Special provisions: None.
- Transport in bulk according to MARPOL Annex II and the IBC Code: Not applicable.
- ICAO-TI / IATA-DGR (air transport):
- UN number or ID number: Not regulated.
- UN proper shipping name: Not regulated.
- Transport hazard class(es): Not regulated.
- Packing group: Not regulated.
- Environmental hazards: Not applicable.
- Special provisions: None.
Section 8 – Individual protection measures
Exposure controls and personal protective equipment should follow the safety data sheet recommendations:
- Engineering controls: Ensure adequate ventilation, particularly in confined areas. Avoid generation and inhalation of respirable dust.
- Eye and face protection: Wear safety glasses with side shields or suitable chemical splash goggles.
- Hand protection:
- Use suitable protective gloves conforming to EN 374.
- Recommended materials: nitrile rubber and Viton.
- Unsuitable materials: natural rubber and disposable gloves.
- Ensure the breakthrough time of the selected glove material is not exceeded; for the recommended materials it is generally greater than 480 minutes. Follow glove supplier guidance.
- Skin and body protection: Wear suitable protective clothing to prevent contact with skin.
- Respiratory protection: Under normal conditions of use, no respiratory protection is required. If exposure limits are exceeded or irritation occurs, improve ventilation and, if necessary, evacuate the area.
- Environmental exposure controls: Prevent uncontrolled release of the product into the environment.
Contenido generado por IA
