NAUTICCLEAN 17 TEAK STEP 1

What is NAUTICCLEAN 17 TEAK STEP 1 and why choose it

NAUTICCLEAN 17 TEAK STEP 1 is an alkaline cleaner, degreaser and stain remover specifically formulated and laboratory-tested for the restoration and maintenance of teak used in boating. Its wetting and penetrating power helps remove stubborn dirt, darkened stains, dried mould and greasy marks while preserving seals. Used as the first part of a two-step system with TEAK STEP 2, it restores the natural appearance of teak surfaces.

Main features

• Highly effective alkaline cleaner, degreaser and stain remover for teak.
• Developed and tested in the laboratory specifically for teak on boats.
• Strong wetting and penetrating action to remove heavy soiling and dark stains.
• Does not affect or alter silicone seals (laboratory tested).
• Does not attack stainless steel (laboratory tested).
• Contains surfactants of vegetable origin.
• Free from phosphates, chlorine and NTA.
• Bi-product system for optimum restoration: TEAK STEP 1 cleaning, followed by TEAK STEP 2 brightening.
• Easy to use for both restoration work and daily maintenance.

Technical specifications

• Product type: Detergent – cleaner, degreaser, stain remover for teak.
• Physical state: Liquid.
• Colour: Colourless.
• Odour: Aromatic.
• pH (20 °C): ca. 13.
• Density (20 °C): ca. 1.05.
• Solubility: Completely miscible with water.
• Contains: < 5% non-ionic surfactants, < 5% cationic surfactants.
• Biodegradability: Surfactants comply with the biodegradability criteria of Regulation (EC) No 648/2004 on detergents.
• Available packaging: NCT17-1 bottle 1 l / 33 oz; NCT17-5 can 5 l / 169 oz.
• Product code: T17 TEAK STEP 1 (article number NCT17).

Applications and use cases

Teak restoration on boats

TEAK STEP 1 is intended for intensive cleaning and restoration of teak used on boats, such as decks and other teak elements. It prepares the surface for the specific brightener TEAK STEP 2.

Restoration procedure

1. Prepare a solution using 1 part TEAK STEP 1 to 3 parts water in a bucket.
2. Spray or spread the solution onto the teak surface using a soft brush.
3. Rub following the grain of the wood.
4. Leave to act for about 10 minutes. Do not rinse.
5. Apply TEAK STEP 2 with a clean brush. The original appearance of the wood will be progressively revived as TEAK STEP 2 is applied.
6. Rinse and brush with a soft deck cleaning brush to avoid damaging the wood fibres.

Attention: Do not use on aluminium or light alloys and do not allow TEAK STEP 2 to dry on teak.

Daily maintenance of teak

1. Pour 20 ml of TEAK STEP 1 into a bucket of fresh water.
2. Apply with a soft brush, gently scrubbing the teak surface.
3. Rinse with fresh water.

FAQ

1. What type of surfaces is NAUTICCLEAN 17 TEAK STEP 1 designed for?

It is formulated specifically for the cleaning, restoration and maintenance of teak used in boating.

2. Can I use TEAK STEP 1 on metals?

It does not alter stainless steel (tested in the laboratory), but it must not be applied to aluminium or light alloys.

3. Do I need to rinse after using TEAK STEP 1 during restoration?

During the restoration process, the product should be left to act for about 10 minutes without rinsing, then TEAK STEP 2 is applied. Rinsing is carried out after the TEAK STEP 2 application.

4. Is TEAK STEP 1 safe for seals?

Yes, it does not affect or alter silicone seals, as confirmed by laboratory tests.

5. Is the product suitable for regular cleaning?

Yes, for everyday maintenance you can dilute 20 ml in a bucket of fresh water and clean with a soft brush before rinsing.

6. What is the pH of NAUTICCLEAN 17 TEAK STEP 1?

The product has a pH of approximately 13 at 20 °C.

7. Are the surfactants biodegradable?

The surfactants contained in the formula meet the biodegradability criteria of Regulation (EC) No 648/2004 on detergents.

8. In what sizes is the product available?

It is available in 1 l / 33 oz bottles (reference NCT17-1) and 5 l / 169 oz cans (reference NCT17-5).

9. Can I dispose of leftovers down the drain?

No, the product should not be disposed of with household waste or allowed to reach the sewer system. Disposal should follow official regulations.

10. How should the product be stored?

Keep the container tightly closed, protected from frost, cold, heat and direct sunlight, in a ventilated place.

Section 14 – Transport information

• UN number: ADR, ADN, IMDG, IATA: suppressed.
• UN proper shipping name: ADR, ADN, IMDG, IATA: suppressed.
• Transport hazard classes: ADR, ADN, IMDG, IATA: class suppressed.
• Packing group: ADR, IMDG, IATA: suppressed.
• Hazards for the environment: Not applicable.
• Special precautions for user: Not applicable.
• Bulk transport according to Annex II of MARPOL and the IBC Code: Not applicable.

Section 8 – Personal protective measures

• Wash hands before breaks and at the end of work.
• Respiratory protection is not normally required.
• Use protective gloves made of material impermeable and resistant to the product; the exact breakthrough time must be confirmed with the glove manufacturer.
• Inspect gloves before use and replace them according to the manufacturer’s recommendations.
• Wear protective goggles, especially during transfer or handling of the product.
• Use suitable protective clothing or coveralls to avoid direct contact with the product.

*Contenido generado por IA