SMOOTH CORNER STRAP

What is the Mirka SMOOTH CORNER STRAP and why choose it?

The Mirka SMOOTH CORNER STRAP, based on Mirka Flexi Blending Tape 15 mm x 25 m, is a flexible masking foam designed specifically for curved style lines and panel edges. Its compressible foam profile and rubber adhesive allow you to create clean blending zones and soft paint transitions while reducing the need for post-job rework.

Main features

• Flexible foam construction: Adapts easily to curves, corners and complex panel shapes.
• Optimised for blending: Creates a soft edge to minimise visible paint lines and polishing work.
• Secure rubber adhesive: Provides reliable adhesion to the substrate while allowing clean removal.
• Controlled peel adhesion: Peel adhesion of 6 N/25 mm for a good balance between tack and removability.
• Dimensional stability: Approximate thickness of 4 mm (+/- 0.5 mm) for consistent gap and masking height.
• Good shear performance: Shear adhesion of more than 10 hours at 23°C for stable positioning during the job.
• Temperature resistant: Withstands 95°C for 1 hour, suitable for typical refinish drying cycles.
• Ready-to-use roll: Supplied in a 15 mm x 25 m roll for convenient cutting and application.
• White foam colour: Helps visual control of placement along the panel edge or style line.

Technical specifications

• Product identifier: 9190221001 Flexi Blending Tape 15 mm x 25 m
• Brand: Mirka
• Product type: Flexible blending/masking foam tape
• Foam material: White foam
• Adhesive type: Rubber adhesive
• Roll width: 15 mm
• Roll length: 25 m
• Thickness: 4 mm (+/- 0.5 mm)
• Peel adhesion: 6 N/25 mm
• Shear adhesion: > 10 h / 23°C
• UV resistance: Limited
• Temperature resistance: 95°C for 1 hour
• Shelf life: One year from date of receipt by customer when stored at 22°C (72°F) and 50% relative humidity

Applications and use cases

• Automotive refinishing: Masking along curved style lines, swage lines and panel edges to create soft blend areas during spot repairs or panel repainting.
• Body shop work: Defining transition zones between new and existing coatings while limiting hard paint edges.
• Panel edge protection: Providing a cushioning foam barrier to protect adjacent surfaces from overspray.
• Detail repair and smart repair: Ideal for small to medium-sized repairs where precise, flexible masking is needed.

FAQ

1. What is the Mirka SMOOTH CORNER STRAP made of?

It is a white foam tape with a rubber-based adhesive layer designed for flexible masking and blending.

2. What are the dimensions of the roll?

The roll is 15 mm wide and 25 m long, with a foam thickness of approximately 4 mm (+/- 0.5 mm).

3. Can it withstand paint booth temperatures?

Yes, the tape is temperature resistant up to 95°C for 1 hour, matching typical automotive refinish drying cycles.

4. How long does the adhesive hold in shear?

The shear adhesion is more than 10 hours at 23°C, providing stable positioning during standard repair operations.

5. Is the product UV resistant?

It has limited UV resistance and should not be exposed to strong UV radiation for extended periods.

6. How should I store the tape?

Store it at around 22°C (72°F) and 50% relative humidity. Under these conditions the shelf life is one year from the date you receive the product.

7. Does it leave residue after removal?

The balanced peel adhesion of 6 N/25 mm is designed to offer good tack with clean removal when the tape is used within the recommended conditions.

8. Is this tape suitable for straight lines only?

No, the flexible foam is specifically intended for curved style lines and contoured panel edges.

9. Can it be used with any paint system?

The tape is a general-purpose masking accessory and can be used alongside common automotive refinish systems, following the paint manufacturer’s recommendations.

10. Is the product classified as hazardous?

According to the supplied information for Mirka coated abrasive and accessory products, it is not classified as a dangerous substance or mixture under Regulation (EC) No 1272/2008.

14. Transport information

The product is not covered by international regulation on the transport of dangerous goods. It can normally be shipped as standard non-dangerous cargo, following applicable national and regional transport rules.

8. Individual protection measures

When using this tape together with sanding, grinding or spraying operations, it is recommended to perform a risk assessment and select personal protective equipment according to the application and the materials being processed. Based on the general guidance for Mirka abrasive products, the following protection may be required:

• Respiratory protection: Use suitable respiratory protective equipment when dust or aerosols may be generated.
• Hand protection: Wear protective gloves suited to the materials handled.
• Eye protection: Use protective goggles or a face shield, especially during sanding and spraying.
• Hearing protection: Use hearing protection when working in noisy environments or with power tools.
• Body protection: Wear appropriate protective clothing to shield skin from dust and overspray.

*Contenido generado por IA