What is SEAJET THINNER E and why choose it?
SEAJET THINNER E from Seajet is a xylene-based thinner and cleaner specifically formulated for epoxy-based paints. It is recommended for use with Seajet 017, Seajet 117 and Seajet 118, helping to adjust application viscosity and clean equipment while maintaining the performance of the coating system. With a controlled flash point and defined VOC content, it is designed for professional marine and industrial paint applications where reliable, specification-based performance is required.
Main features
- Xylene-based formulation suitable for thinning and cleaning epoxy-based paints.
- Recommended pairing with Seajet 017, Seajet 117 and Seajet 118 systems.
- Controlled thinning: usually not more than 5% thinner should be added to the paint.
- Typical aromatic odour, characteristic of solvent-borne systems.
- High solvent strength for effective viscosity adjustment and equipment cleaning.
- Defined flash point of 13°C for consistent safety handling conditions.
- Pack sizes: 1 litre and 5 litre containers.
- Minimum shelf life of 3 years at 20°C when stored correctly in unopened original containers.
Technical specifications
- Product type: Thinner and cleaner for epoxy based paints.
- Base: Xylene-based solvent blend.
- Recommended use: For Seajet 017, Seajet 117, Seajet 118.
- VOC (theoretical): 850 g/l.
- Flash point: 13°C (ISO 13736:2021).
- Physical state: Liquid.
- Colour: Colourless.
- Odour: Typical aromatic solvent odour.
- Relative density: 0.87 at 20°C (ASTM D1475-98).
- Kinematic viscosity: < 20.5 mm²/s at 40°C (non-Newtonian, thixotropic behaviour).
- Explosive limits (components): approx. 1.0–7.0% v/v (reaction mass of ethylbenzene and xylene), 1.2–7.6% v/v (n-butyl acetate), 2–12% v/v (isopropyl alcohol), 1.9–13.1% v/v (1-methoxy-2-propanol).
- Auto-ignition temperature (lowest component): 287°C (1-methoxy-2-propanol).
- Vapour pressure at 20°C (components): reaction mass of ethylbenzene and xylene 8.21 mbar; n-butyl acetate 10.7 mbar; isopropyl alcohol 42 mbar; 1-methoxy-2-propanol 11.6 mbar.
- Relative vapour density: 1–2 (20°C, calculated).
- Shelf life: Minimum 3 years at 20°C in unopened containers.
- Packaging: 1 L and 5 L cans.
Applications and use cases
- Thinning epoxy primers and coatings: Designed for controlled thinning of Seajet 017, 117 and 118 to achieve the application viscosity specified by the coating system.
- Spray and brush application adjustment: Helps optimise flow and atomisation when applying epoxy coatings by spray or other professional methods.
- Cleaning tools and equipment: Suitable for cleaning spray guns, rollers and brushes that have been used with compatible epoxy-based paints.
- Professional marine and industrial maintenance: Intended for use as part of paint and related product systems where an epoxy-compatible thinner is required.
FAQ – SEAJET THINNER E
-
What type of paints is SEAJET THINNER E designed for?
It is a thinner and cleaner for epoxy based paints and is recommended for Seajet 017, Seajet 117 and Seajet 118.
-
How much thinner should I add to the paint?
Usually not more than 5% of SEAJET THINNER E should be added to the paint.
-
Can SEAJET THINNER E be used as a cleaner?
Yes. It is specified as a thinner and cleaner for epoxy-based paints and can be used to clean compatible application equipment.
-
What is the flash point of this thinner?
The flash point is 13°C.
-
How should I store the product?
Store between 0°C and 40°C in a dry, well ventilated place away from heat sources and direct sunlight. Keep containers tightly closed and away from ignition sources. Prevent unauthorised access.
-
What is the minimum shelf life?
The minimum shelf life is 3 years at 20°C when stored in unopened original containers under recommended conditions.
-
Is the product flammable?
Yes. It is classified as a highly flammable liquid and vapour (Flam. Liq. 2, H225).
-
What health hazards are associated with SEAJET THINNER E?
It is harmful in contact with skin, causes skin irritation and serious eye irritation, may cause respiratory irritation, may cause drowsiness or dizziness, and may cause damage to organs through prolonged or repeated exposure. It may be fatal if swallowed and enters airways.
-
Can the product be released into drains or watercourses?
No. It should not be allowed to enter drains, sewers or watercourses. Waste and containers must be disposed of at hazardous or special waste collection points according to local regulations.
-
What are the available pack sizes?
SEAJET THINNER E is supplied in 1 litre and 5 litre packs.
Section 14 – Transport information
- UN number / ID number: UN 1263.
- Proper shipping name: Paint related material.
- Transport hazard class: Class 3 (flammable liquid).
- Packing group: II.
- Labels: Class 3 flammable liquid label.
- Environmental hazards: Not classified as a marine pollutant; environmental hazard indicator: No.
- Hazard identification number (ADR): 33.
- EmS (IMDG): F-E, S-E.
- General transport precautions: Always transport in securely closed, upright containers. Ensure transport personnel know what to do in the event of an accident or spillage.
Section 8 – Personal protective measures
Exposure controls
- Use only outdoors or in a well-ventilated area. Provide adequate general and local exhaust ventilation to keep vapour and particulate concentrations below occupational exposure limits.
- Avoid the creation of flammable or explosive vapour concentrations in air and avoid vapour levels above workplace exposure limits.
Respiratory protection
- If workers may be exposed to concentrations above exposure limits, they should use a respirator to EN 140 fitted with a combined particulate and vapour filter to EN 14387 with an assigned protection factor of at least 10 (e.g. A2P3).
- During work inside spray booths where ventilation cannot reliably control particulates and solvent vapours, a compressed air-fed respirator should be worn during spraying and until concentrations are below exposure limits.
Hand protection
There is no single glove material that gives unlimited resistance. For repeated or prolonged contact, use gloves tested according to EN 374 and follow the glove manufacturer’s instructions. Gloves should be replaced regularly and immediately if damaged.
- High protection – repeated/prolonged exposure (> 480 min breakthrough): Polyethylene (PE) gloves, minimum thickness 0.062 mm.
- High protection – 240–480 min breakthrough: Polyethylene (PE) gloves, minimum thickness 0.062 mm.
- Medium to high protection – 120–240 min breakthrough: Polyethylene (PE) gloves (0.062 mm) and Butyl Viton gloves (0.70 mm).
- Medium protection – 60–120 min breakthrough: Polyethylene (PE) gloves (0.062 mm), polyvinyl alcohol (PVA) gloves (0.2–0.3 mm) and Butyl Viton gloves (0.70 mm).
- Short-term / splash protection – 30–60 min breakthrough: Polyethylene (PE) gloves (0.062 mm), PVA gloves (0.2–0.3 mm), Butyl Viton gloves (0.70 mm), nitrile gloves (0.31 mm).
- Short-term / splash protection – 10–30 min breakthrough: Polyethylene (PE) gloves (0.062 mm), PVA gloves (0.2–0.3 mm), Butyl Viton gloves (0.70 mm), butyl gloves (0.3 mm), nitrile gloves (0.175 mm).
- Not suitable (breakthrough < 10 min, non-exhaustive): natural rubber gloves (0.75 mm), nitrile gloves (0.75 mm), neoprene gloves (0.75 mm).
- PE gloves can be used as under-gloves for difficult situations such as high exposure or unknown chemical composition.
Eye and face protection
- Use safety eyewear tested to EN 166, designed to protect against liquid splashes.
Skin and body protection
- Wear anti-static protective clothing made of natural fibre or high temperature resistant synthetic fibre.
Environmental protection measures
- Do not allow the product to enter drains or watercourses.
*Contenido generado por IA
