What it is and why choose it
Scotch Grip™ 1357 Contact Adhesive from 3M is an industrial contact adhesive supplied as a brown or green, solvent-odour liquid syrup. Formulated with polychloroprene and organic solvents, it is designed for professional and industrial adhesive applications where a fast-drying, highly flammable contact adhesive is required. The product is intended for use by trained personnel in controlled environments and is not for consumer sale or use.
Main characteristics
- Industrial contact adhesive: Classified as a contact adhesive for use in industrial and professional adhesive applications.
- Solvent-based, highly flammable: Flammable liquid, Category 2 (H225), with a flash point of >= -35 ºC (closed cup). Requires strict control of ignition sources and use of explosion-proof ventilation.
- Polychloroprene-based formulation: Contains polychloroprene (10–30% by weight), hydrocarbons C6/C6–C7, acetone and butanone among other components.
- Viscous liquid for application by brush, roller or spray: Supplied as a syrup-like liquid that can be applied by industrial spraying, roller or brush, as described in the exposure scenarios.
- Distinct appearance: Brown or green colour with a characteristic solvent odour.
- High volatile organic compound (VOC) content: EU VOCs 75–80% by weight; percent volatile 75–80% by weight.
- Health hazard classification: Causes skin irritation and serious eye irritation, may cause drowsiness or dizziness, may cause damage to organs (nervous system) through prolonged or repeated exposure, and is suspected of damaging fertility and of damaging the unborn child.
- Environmental hazard: Classified as Aquatic Chronic 2 (H411), toxic to aquatic life with long lasting effects.
- For professional/industrial use only: The SDS specifies use for industrial/occupational applications, not for consumer use.
Technical specifications
- Brand: 3M
- Product name: Scotch Grip™ 1357 Contact Adhesive
- Physical state: Liquid
- Specific physical form: Syrup
- Colour: Brown, Green
- Odour: Solvent
- Boiling point: >= 55.8 ºC
- Flash point: >= -35 ºC (closed cup)
- Flammability classification: Flammable Liquid, Category 2 (Flam. Liq. 2, H225)
- Kinematic viscosity: 318 mm²/s
- Relative density: 0.786 – 0.834 (water = 1)
- pH: Substance/mixture is non-soluble in water
- VOC content (EU): 75 – 80% by weight
- Percent volatile: 75 – 80% by weight
- Identified use: Product (adhesive) for industrial and professional use.
- Use restrictions: For industrial/occupational use only. Not for consumer sale or use.
Applications and use cases
According to the Safety Data Sheet, Scotch Grip™ 1357 Contact Adhesive is intended for industrial and professional adhesive uses. Typical application modes described include:
- Industrial use of adhesives by spraying: Application of the product by industrial spraying (PROC 07) in controlled, ventilated environments.
- Industrial use of adhesives by roller or brush: Application of the product with a roller or brush (PROC 10) at industrial sites.
- Professional use of adhesives by roller or brush: Widespread use by professional workers indoors or outdoors (PROC 10, ERC 08a/08d), applying the product with a roller or brush.
- Professional non‑industrial spraying: Spraying of the product by professional users (PROC 11) under controlled conditions.
Specific substrates, materials, bond strengths, open times or temperature resistance are not detailed in the Safety Data Sheet. Consultar ficha técnica del fabricante.
FAQ – Scotch Grip™ 1357 Contact Adhesive
-
Is Scotch Grip™ 1357 Contact Adhesive suitable for consumer use?
No. The Safety Data Sheet states that the product is for industrial/occupational use only and is not intended for consumer sale or use.
-
What is the physical form and colour of this adhesive?
The adhesive is a liquid syrup with a brown or green colour and a solvent odour.
-
How flammable is Scotch Grip™ 1357?
The product is classified as a Flammable Liquid, Category 2 (highly flammable liquid and vapour) with a flash point of >= -35 ºC. It must be kept away from heat, hot surfaces, sparks and open flames, and used only with non-sparking tools and explosion-proof ventilation.
-
Can this adhesive be used outdoors?
Professional wide-spread use scenarios in the SDS include both indoor and outdoor applications by professional workers. All protective measures and environmental precautions in the SDS must be followed.
-
What are the main health hazards associated with this product?
It causes skin and serious eye irritation, may cause drowsiness or dizziness, may cause damage to the nervous system through prolonged or repeated exposure, and is suspected of damaging fertility and of damaging the unborn child.
-
Is Scotch Grip™ 1357 hazardous to the environment?
Yes. It is classified as hazardous to the aquatic environment, Chronic Category 2 (H411), toxic to aquatic life with long lasting effects. Releases to the environment should be avoided.
-
How should spills of this adhesive be handled?
Spills should be contained using non-sparking tools and suitable inorganic absorbent materials. The area must be ventilated with fresh air, ignition sources removed, and collected waste placed in a metal container approved for transport. Disposal must follow local/regional/national/international regulations.
-
How should the product be stored?
Store in a well-ventilated place, keep cool, keep the container tightly closed, and store away from heat, acids and oxidising agents.
-
What is the VOC content of Scotch Grip™ 1357 Contact Adhesive?
The EU Volatile Organic Compounds content is 75–80% by weight, and the percent volatile is 75–80% by weight.
-
Where can I find detailed performance data such as bond strength or recommended substrates?
These details are not included in the Safety Data Sheet. Consultar ficha técnica del fabricante.
Section 14 – Transportation information
The following transportation information is taken from Section 14 of the Safety Data Sheet:
- UN number (ADR / IATA / IMDG): UN1133
- UN proper shipping name:
- Ground transport (ADR): ADHESIVES
- Air transport (IATA): ADHESIVES
- Marine transport (IMDG): ADHESIVES (ZINC OXIDE)
- Transport hazard class: Class 3 (flammable liquids) for ADR, IATA and IMDG.
- Packing group: II (for ADR, IATA and IMDG).
- Environmental hazards:
- ADR (ground): Environmentally hazardous.
- IATA (air): Not applicable.
- IMDG (marine): Marine pollutant.
- Special precautions for user: Users are directed to other sections of the Safety Data Sheet for further information.
- Transport in bulk according to IMO instruments: No data available.
- Control temperature / emergency temperature: No data available.
- ADR classification code: F1.
- IMDG segregation code: NONE.
Section 8 – Individual protection measures
The following exposure controls and personal protective equipment (PPE) are summarised from Section 8 of the Safety Data Sheet. Selection of PPE must be based on an exposure assessment and relevant local standards.
Engineering controls
- Use general dilution and/or local exhaust ventilation to keep airborne concentrations below applicable exposure limits and to control vapours, mists and sprays.
- If ventilation is not adequate, respiratory protection must be used.
- Ventilation equipment must be explosion‑proof.
Eye and face protection
- Use eye/face protection to prevent contact based on the exposure assessment.
- Recommended options:
- Safety glasses with side shields.
- Indirect vented goggles.
- Eye protection should conform to EN 16321.
Skin and hand protection
- Use gloves and/or protective clothing approved to relevant local standards to prevent skin contact, based on exposure levels, concentration, frequency and duration of use, and physical conditions (such as temperature).
- Recommended glove material: polymer laminate.
- Thickness and breakthrough times: no data available in the SDS.
- Nitrile gloves may be worn over polymer laminate gloves to improve dexterity.
- Gloves should be tested according to EN 374.
Respiratory protection
- An exposure assessment may be required to decide if a respirator is needed. If required, respirators must be used within a full respiratory protection programme.
- Recommended types:
- Half-facepiece or full-facepiece air‑purifying respirator suitable for organic vapours and particulates.
- Respiratory protection should conform to EN 140 or EN 136 with filter types A and P.
Environmental exposure controls
- The SDS refers to the annex for environmental exposure control details.
*Contenido generado por IA
