3M Spray 80 Neoprene Contact Adhesive is an aerosol adhesive for professional and industrial use. It features a neoprene contact formulation supplied in a convenient spray form; for additional technical details: Consultar ficha técnica del fabricante.
*Contenido generado por IA
| Presentation: | Spray |
| Capacity: | 500 ml |
| Colour: |
| Presentation: | Spray |
| Capacity: | 500 ml |
| Colour: |
3M Spray 80 Neoprene Contact Adhesive is an aerosol adhesive designed for professional and industrial use. Supplied in a pressurised spray can, it delivers a controlled spray pattern that simplifies the application of adhesive in demanding environments. Its formulation contains fast-evaporating solvents such as methyl acetate, dimethyl ether and cyclohexane, providing a quick-drying, contact-bonding action suitable for industrial assembly and maintenance operations where an aerosol adhesive is required.
This product is classified as an extremely flammable aerosol and is intended exclusively for professional and industrial users who can implement appropriate safety, handling and ventilation controls.
The identified use of this product is as an aerosol adhesive in professional and industrial environments. It is intended for operations where a sprayable contact adhesive is required and where ventilation, exposure controls and trained personnel are available.
Examples of appropriate contexts of use include:
Specific substrates, materials and detailed performance characteristics are not provided in the available documentation. Consultar ficha técnica del fabricante.
No. The safety data sheet specifies that the product is for industrial/occupational use only and is not intended for consumer sale or use.
The identified use is as an aerosol adhesive, providing a spray-applied contact adhesive system for professional and industrial applications.
It is classified as an extremely flammable aerosol (Aerosol 1, H222). The container is pressurised and may burst if heated (H229). It must be kept away from heat, hot surfaces, sparks, open flames and other ignition sources.
The product can cause skin irritation and serious eye irritation, may cause drowsiness or dizziness, and is suspected of damaging the unborn child. It may also produce allergic skin reactions in sensitised individuals due to the presence of rosin.
Use in confined areas with minimal air exchange is not recommended. The SDS requires adequate general or local exhaust ventilation and warns not to remain in areas where oxygen may be reduced.
Store in a well-ventilated place, away from heat and oxidising agents, protected from sunlight, and do not expose the container to temperatures above 50 °C / 122 °F. Keep the container tightly closed.
For skin contact, wash with soap and water and seek medical attention if symptoms develop. For eye contact, rinse with plenty of water, remove contact lenses if easy to do, continue rinsing, and obtain medical attention if symptoms persist.
Evacuate the area, eliminate ignition sources and provide ventilation. Contain the spill with suitable inorganic absorbent, collect using non-sparking tools into an approved metal container, then clean residues with an appropriate solvent handled by authorised personnel. Dispose of collected material according to local regulations.
Contents and containers must be disposed of in accordance with local, regional, national and international regulations. The SDS recommends incineration in a permitted facility capable of handling aerosols and gaseous waste. Empty packaging is typically classified as metallic packaging under EU waste code 15 01 04.
*Contenido generado por IA
| Ref. | Amount* |
|---|---|
| S80 | 30,27 € |
Color: Gray
1 X $113.88
