RHYNOGRIP SUPPORT PLATE 150 MM 15 HOLES. HIGH PROFILE

What it is and why choose it

The RHYNOGRIP SUPPORT PLATE 150 MM 15 HOLES. HIGH PROFILE from Indasa is part of the range of products designed to work with coated abrasives used for grinding and sanding different kinds of materials. Coated abrasives in this range are supplied in several formats such as discs, sheets, rolls, strips and belts and are intended for professional surface preparation processes.

This product is covered by voluntary product information based on the format of a safety data sheet, which confirms that the associated coated abrasives are considered articles and are not classified as dangerous substances or mixtures according to applicable European regulations.

Main features

• Designed for use with coated abrasives for grinding and sanding.
• Part of the Indasa system of abrasives supplied in discs, sheets, rolls, strips and belts.
• Associated products are not classified as dangerous under Directive 1999/45/EC or Regulation (EC) No. 1272/2008.
• No specific hazard effects known for inhalation, skin or eye contact, or ingestion in the form supplied.
• Stable in normal handling and storage conditions with no dangerous reactions known.
• Non-water-soluble solid product.

Technical specifications

• Physical state: solid.
• Colour: several.
• Solubility in water: none.
• Other specific technical characteristics: Consultar ficha técnica del fabricante.

Applications and use cases

This product is intended for use together with coated abrasives for:

• Grinding different kinds of materials.
• Sanding different kinds of materials.

For detailed suitability for particular substrates or machines: Consultar ficha técnica del fabricante.

FAQ

1. Is this product classified as dangerous?

No. Coated abrasives covered by this information are considered articles and are not classified as dangerous substances or mixtures according to Directive 1999/45/EC or Regulation (EC) No. 1272/2008.

2. Does the product require any hazard labelling?

No specific labelling is required under the applicable EC directives for the coated abrasives associated with this product.

3. What is the intended use of the product?

The product is intended to be used together with coated abrasives for the grinding and sanding of different kinds of materials.

4. Are there known health effects from normal use?

No toxicological effects are known if the product is inhaled or swallowed, or in case of eye or skin contact in the supplied form.

5. What personal protective equipment is recommended during grinding and sanding?

Before grinding it is recommended to carry out a risk assessment and use suitable personal protective equipment. See the section "Individual protection measures" below for details.

6. How should waste be disposed of?

Waste should be disposed of according to national and regional regulations. Due to the ingredients and properties, disposal as non hazardous waste is possible if no hazardous materials have been added to the abrasives (EWC No. 120121). If hazardous materials have been added, disposal as hazardous waste may be required (EWC No. 120120).

7. Is the product biodegradable or bioaccumulative?

No biodegradable or bioaccumulative potentials are known.

8. What happens at high temperatures?

At temperatures exceeding 250 °C, hazardous or toxic decomposition products may be generated.

9. Is the product affected by water?

No. The product is a solid with no solubility in water.

10. Is a chemical safety assessment required?

No chemical safety assessment is required for this product.

Section 14 – Transport information

The product is not covered by international regulation on the transport of dangerous goods. Standard transport procedures can be applied according to local and company rules.

Section 8 – Individual protection measures

Before grinding it is recommended to perform a risk assessment and to use personal protection equipment accordingly. During grinding and sanding, hazardous dust from the workpiece material may be generated, and national dust exposure limit values must be taken into consideration.

Recommended personal protective equipment

• Respiratory protection: Use suitable respiratory protective equipment. The type depends on the specific application and the material being ground.
• Hand protection: Wear protective gloves. The material and type of glove depend on the specific application and the material being ground.
• Eye protection: Wear protective goggles or a face shield. The type depends on the specific application and the material being ground.
• Hearing protection: Use hearing protection appropriate to the noise level and the application.
• Body protection: Use protective clothing suitable for the grinding or sanding operation and the material being processed.

*Contenido generado por IA