What NAUTICCLEAN 02 is and why choose it
NAUTICCLEAN 02 by NauticClean is an acid scaling cleaner specially designed for hulls and rust streaks. It restores the original whiteness of gelcoat very quickly, removes yellowing and corrosion residues, and eliminates organic fouling such as algae and shells. Thanks to its powerful acidic formula (pH around 1) and carefully controlled surfactant content, it is effective on gelcoat surfaces and recommended on stainless steel where it helps remove and limit the formation of corrosion.
Main features
- Restores whiteness and revives gelcoat very quickly.
- Removes yellow veil and traces of corrosion.
- Eliminates algae, shells and all residues of pollution on hulls.
- Removes all streaks of rust.
- Recommended on stainless steel to eliminate the formation of corrosion.
- Acid formula with pH around 1.
- Available in spray, bottle and can formats for small touch-ups or larger maintenance jobs.
Technical specifications
- Product name: NAUTICCLEAN 02 – Scaling cleaner for hulls and rust streaks.
- Brand: NauticClean.
- Intended use: Detergent, scaling cleaner for hulls, rust streak and pollution remover, deoxidizer for gelcoat and stainless steel.
- Physical state: Liquid.
- Colour: Colourless.
- Odour: Characteristic.
- pH (20 °C): approx. 1.
- Density (20 °C): approx. 1.09.
- Solubility in water: Little or not miscible.
- Contains: < 5% non-ionic surfactants.
- Classification (Reg. (EC) 1272/2008): Skin Corr. 1B H314, Eye Dam. 1 H318, Acute Tox. 4 H302, STOT SE 3 H335.
- Hazard statements: H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H335 May cause respiratory irritation.
- Danger pictograms: GHS05 (corrosion), GHS07.
- Article numbers and formats:
- 02-750: Spray 750 ml / 25 oz.
- 02-1: Bottle 1 l / 33 oz.
- 02-5: Can 5 l / 169 oz.
- Storage conditions: Keep container tightly closed and protected from cold, frost, UV rays, heat and direct sunlight in a ventilated place. Protect from freezing. For prolonged storage, vapours or gases may form and cause swelling of the packaging.
- Water hazard class: Category 1 (slightly hazardous to water) – self-classification.
Applications and use cases
Typical applications
- Cleaning and descaling boat hulls.
- Reviving tarnished or yellowed gelcoat surfaces.
- Removing rust streaks on hulls and fittings.
- Removing algae, shells and general pollution residues from immersed or waterline areas.
- Treatment of stainless-steel parts on boats where corrosion and rust begin to appear.
Instructions for use
- General safety: Dangerous product. Respect the safety instructions. Acid formula. Avoid contact with skin and eyes and do not inhale vapours, mists or aerosols.
- 750 ml spray (02-750): Spray evenly on the surface to be treated, leave to act for 5 to 10 minutes. Rub with a paintbrush or brush, then rinse thoroughly with clear water.
- 1 l bottle / 5 l can (02-1 / 02-5): Apply the product on the surface with a roller or a brush. Leave to act for 5 to 10 minutes, scrub with a brush, then rinse thoroughly with clear water.
- Residue disposal: Do not dispose of residues to the sewer or into watercourses. Use dedicated installations and suitable containers for waste disposal.
FAQ
1. What is NAUTICCLEAN 02 used for?
It is used as a scaling cleaner for hulls and rust streaks. It restores whiteness to gelcoat, removes yellowing and corrosion residues, eliminates algae, shells and pollution residues, and is recommended on stainless steel to help eliminate corrosion.
2. On which surfaces can I apply this product?
It is intended for gelcoat hulls and stainless-steel surfaces where yellowing, rust streaks, incrustations or pollution residues are present.
3. How long should I leave the product to act?
After application, let the product act for about 5 to 10 minutes before scrubbing and rinsing with clear water.
4. Is NAUTICCLEAN 02 ready to use?
The documentation describes direct spraying or application with a brush or roller; no dilution is indicated. Consultar ficha técnica del fabricante.
5. What personal protective equipment is recommended during use?
Wear suitable gloves, protective goggles and a protective overall or work clothing. Additional protective equipment is detailed in the personal protection section below.
6. Can I pour leftover product or rinse water into the sewer?
No. Residues must not be disposed of into the sewer or watercourses. Use appropriate installations and containers for disposal.
7. How should I store the product?
Keep the container tightly closed in a ventilated place, protected from cold, frost, UV rays, heat and direct sunlight. During prolonged storage, vapours or gases may form and cause swelling of the packaging.
8. What is the pH of NAUTICCLEAN 02?
The pH is approximately 1, which means it is a strongly acidic product.
9. In which packaging sizes is the product available?
It is available as a 750 ml spray, a 1 l bottle and a 5 l can.
Section 14 – Transport information
- UN number: UN3264.
- Proper shipping name (ADR): 3264 CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (AMMONIUM HYDROGENDIFLUORIDE, HYDROCHLORIC ACID).
- Proper shipping name (IMDG): CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (AMMONIUM HYDROGENDIFLUORIDE, HYDROCHLORIC ACID).
- Proper shipping name (IATA): Corrosive liquid, acidic, inorganic, n.o.s. (Ammonium hydrogendifluoride, Hydrochloric acid).
- Transport hazard class: Class 8 – Corrosive substances.
- Label: 8.
- Packing group: II.
- Environmental hazards: Not applicable according to the SDS.
- Special precautions for user: Attention – corrosive substances.
- Kemler number: 80.
- EMS number (IMDG): F-A, S-B.
- Segregation group: Acids.
- Stowage category: B.
- Stowage code: SW2 – Clear of living quarters.
- Bulk transport (MARPOL Annex II / IBC Code): Not applicable.
- ADR limited quantities (LQ): 1 l.
- ADR excepted quantities (EQ): Code E2 – maximum 30 ml per inner packaging, 500 ml per outer packaging.
- IMDG limited quantities (LQ): 1 l.
- IMDG excepted quantities (EQ): Code E2 – maximum 30 ml per inner packaging, 500 ml per outer packaging.
- Transport category (ADR): 2.
- Tunnel restriction code (ADR): E.
Section 8 – Individual protection measures
- General protective and hygiene measures:
- Keep away from food, drink and animal feeding stuffs.
- Remove contaminated clothing immediately.
- Wash hands before breaks and at the end of work.
- Avoid contact with eyes and skin.
- Respiratory protection: If exposure is brief or of low intensity, use a respiratory mask. For more intense or prolonged exposure, use self-contained breathing apparatus.
- Hand protection: Wear protective gloves that are impermeable and resistant to the product. The gloves must be selected according to breakthrough times, permeability and degradation data supplied by the glove manufacturer.
- Eye protection: Wear tightly fitting safety goggles.
- Skin and body protection: Wear protective clothing such as a coverall or work suit. The product information also recommends safety footwear and other appropriate PPE when handling this acidic product.
*Contenido generado por IA
