HDT SLOW ACTIVATOR

What is Awlgrip HDT Slow Activator and why choose it?

Awlgrip HDT Slow Activator (code OA0010) is a dedicated activator for Awlgrip HDT polyurethane systems. It is an essential component in the curing process of Awlgrip HDT Topcoat and Awlgrip HDT Clearcoat, helping to control drying and cure times in warmer conditions. Correct use of this activator supports a high gloss, durable finish and optimizes pot life for complex or large spray projects.

Main features

• Essential for curing: designed specifically to activate Awlgrip HDT technologies so the coatings achieve their required cure.
• Optimized for warm climates: recommended for use at higher application temperatures, including above 30°C (86°F), to manage open time and flow.
• Controls drying and pot life: can be blended with other Awlgrip HDT activators to fine-tune drying and cure speed to the project and climate.
• System-specific component: approved for use with Awlgrip HDT Topcoat and Awlgrip HDT Clearcoat within the specified mix ratios.
• Professional spray application: intended for spray-only polyurethane topcoat and clearcoat systems.

Technical specifications

• Product name: Awlgrip HDT Slow Activator
• Product code: OA0010
• Product type: Activator / curing component for Awlgrip HDT polyurethane systems
• Brand: Awlgrip
• Available pack size: 1 US Quart (≈0.95 L) for activators
• Compatible systems (topcoat): Awlgrip HDT Base + Awlgrip HDT Curing Solution (OC0010)
• Compatible systems (clearcoat): Awlgrip HDT Clearcoat Base (OC0300) + Awlgrip HDT Curing Solution (OC0010)
• Recommended application method: spray application only, as part of the complete Awlgrip HDT system
• Topcoat mix ratio (by volume): 1:1:12.5% (Base : Curing Solution : Activator). Example: 1 gallon base : 1 gallon curing solution : 1 quart activator.
• Clearcoat mix ratio (by volume): 1:1:0.25 (Base : Curing Solution : Activator).
• Typical use temperature – Awlgrip HDT Topcoat (guide): >30°C (>86°F).
• Typical use temperature – Awlgrip HDT Clearcoat (guide): >30°C, or blended with Awlgrip Fast Activator (OA0020) at 20–30°C.

Applications and use cases

• High-performance HDT topcoat systems: used whenever Awlgrip HDT Topcoat is applied in warm or hot conditions where slower curing is required.
• Awlgrip HDT Clearcoat systems: serves as the slow activator in the multi-part system with Awlcraft SE Basecoat and Awlgrip HDT Clearcoat, particularly useful in higher ambient temperatures.
• Large or complex spray projects: blending Awlgrip HDT Slow Activator with other HDT activators allows control over working pot life and drying, helping maintain wet edge and appearance on larger surfaces.

Important usage notes

• Activators are essential for the technology of Awlgrip HDT products to achieve the required curing.
• For Awlgrip HDT Topcoat, OA0010 is generally used for conditions above 30°C (>86°F). It may be blended with other HDT activators to adjust drying and cure times and/or increase working pot life.
• Use of OA0010 in isolation should only be undertaken in extreme temperatures and relative humidity and following guidance from a local technical service representative, as inappropriate use at lower temperatures can result in excessive cure times and increase risk of hazing or down-glossing.
• For Awlgrip HDT Clearcoat, OA0010 is used alone above 30°C, or in a 50:50 blend by volume with Awlgrip Fast Activator (OA0020) between 20–30°C.

FAQ

1. What is Awlgrip HDT Slow Activator used for?

   It is an activator for Awlgrip HDT Topcoat and Awlgrip HDT Clearcoat. It is required in the mixing process so these coatings cure correctly and reach their designed hardness and gloss.

2. Can I spray Awlgrip HDT products without adding the Slow Activator?

   No. Activators are essential to the Awlgrip HDT technology and must be added at the specified mix ratio. Applying without activator will prevent proper curing.

3. When should I use HDT Slow Activator instead of a fast or medium activator?

   For Awlgrip HDT Topcoat, OA0010 is recommended for higher temperatures above 30°C (>86°F), typically as an additive or blend with other HDT activators. For Awlgrip HDT Clearcoat, it is used above 30°C, or blended 50:50 with Fast Activator between 20–30°C.

4. Can Awlgrip HDT Slow Activator be used on its own?

   For HDT Clearcoat, OA0010 is used alone above 30°C. For HDT Topcoat, using OA0010 in isolation should only be done in extreme temperature and humidity conditions and with guidance from a local technical service representative.

5. What happens if I use HDT Slow Activator at low temperatures?

   Use at lower temperatures and humidity can lead to excessively long cure times and increase the risk of hazing or down-glossing of the coating.

6. Is HDT Slow Activator suitable for brush or roller application?

   No. Awlgrip HDT Topcoat and Awlgrip HDT Clearcoat are designed for spray application only, and OA0010 is intended for use within those spray systems.

7. With which products is HDT Slow Activator compatible?

   It is specified for use with Awlgrip HDT Topcoat (with Awlgrip HDT Base and Awlgrip HDT Curing Solution OC0010) and Awlgrip HDT Clearcoat (base OC0300 with OC0010 curing solution).

14. Transport information

Consultar ficha técnica del fabricante.

8. Individual protection measures

Consultar ficha técnica del fabricante.

*Contenido generado por IA