ABRANET ACE STRIP 70 X 420 MM

What is Abranet Ace Strip 70 x 420 mm and why choose it

The Mirka Abranet Ace Strip 70 x 420 mm is a high-performance net abrasive strip designed for tougher and more demanding sanding applications. Its optimized mesh construction combined with ceramic abrasive grains delivers aggressive cutting action, excellent dust extraction and a long service life, especially on hardwoods and solid surface materials.

With its practical 70 x 420 mm format, this strip is ideal for use with long-board sanders or hand sanding blocks in bodyshops, woodworking shops and industrial finishing lines where consistent, high-quality surface preparation is essential.

Main features

• High-performance net abrasive specifically developed for demanding sanding tasks and continuous professional use.
• Optimized mesh construction that allows efficient dust extraction across the entire surface, contributing to a cleaner work environment and reducing clogging.
• Ceramic / ceramic-coated grain offering fast cut and long lifetime, especially on hard and dense materials.
• Closed coating for aggressive material removal and uniform scratch pattern.
• Durable backing with polyamide / PES mesh that resists tearing and edge wear during intensive sanding.
• Strip format 70 x 420 mm suitable for long-board tools and manual sanding of large or flat surfaces.
• Versatile material compatibility including steels, hardwoods, softwoods, fillers, primers, lacquers, solid surface and composites.
• Consistent finish that helps to reduce rework and improve coating adhesion in subsequent painting or finishing stages.

Technical specifications

• Product type: Coated abrasive net strip
• Brand: Mirka
• Product family: Abranet Ace (Group 1 coated abrasives)
• Format: Strip
• Dimensions: 70 mm (width) x 420 mm (length)
• Backing material: Polyamide mesh / PES mesh
• Bonding: Resin over resin
• Abrasive grain: Ceramic / ceramic-coated
• Coating: Closed
• Colour: Light brown
• Physical state: Solid
• Water solubility: Not defined (coated abrasive article)
• Hazard classification: Not classified as a dangerous substance or mixture according to Regulation (EC) No. 1272/2008 (article).

Applications and use cases

The Abranet Ace Strip 70 x 420 mm is engineered for demanding professional sanding operations where fast stock removal, long life and dust control are required.

Suitable materials

• Hardwoods such as beech, oak, ash and other dense timber species
• Softwood and resinous woods
• Solid surface materials and composites
• Steel and mild/carbon steel
• Fillers, primers and body fillers
• Paints, lacquers and varnishes
• MDF, HDF, chipboard and other panel products
• Plastics and fibre-reinforced materials

Typical use environments

• Automotive refinishing: Flattening body filler, primer and putty, paint removal and preparation before basecoat or clearcoat.
• Woodworking and joinery: Leveling hardwood furniture components, doors and panels, and intermediate sanding between coats.
• Solid surface fabrication: Rapid sanding and shaping of solid surface countertops and components.
• Industrial finishing: Production sanding lines needing consistent cut and minimal dust build-up.

FAQ

1. Is Abranet Ace Strip 70 x 420 mm classified as hazardous?

No. As a coated abrasive article it is not classified as a dangerous substance or mixture according to Regulation (EC) No. 1272/2008.

2. What are the main advantages of the net construction?

The mesh backing allows dust to be extracted through the entire surface of the strip, helping to keep the abrasive cutting efficiently, extend its life and improve visibility of the workpiece.

3. On which materials does this strip perform best?

It is particularly effective on hardwoods (such as beech and oak), solid surface materials, fillers and primers, but it can also be used on steel, softwoods, composites and many coated surfaces.

4. Can it be used with dust extraction systems?

Yes. The open mesh design is ideal for use with vacuum-assisted long-board sanders or hand blocks connected to extraction, helping reduce airborne dust.

5. What type of abrasive grain does it use?

The strip uses ceramic or ceramic-coated grains, which provide aggressive cutting action and long service life in demanding applications.

6. Is any special storage condition required?

The coated abrasive is stable when handled and stored correctly. It should be kept in normal dry conditions and protected from extreme heat or moisture.

7. Are there known toxicological or ecological effects?

No specific toxicological or ecological effects are known for the product in its solid article form under normal use and handling.

8. How should used strips be disposed of?

Disposal should follow national and regional regulations. The strips can generally be treated as non-hazardous waste provided no hazardous materials from the workpiece are present.

9. Does the product require any specific labelling?

No hazard labelling is required, as coated abrasives are considered articles and not dangerous substances or mixtures under the applicable regulations.

10. Is it suitable for both machine and hand sanding?

Yes. The 70 x 420 mm strip format is suitable for long-board machines and manual sanding using appropriate backing pads or sanding blocks.

14. Transport information

This product is not covered by international regulations on the transport of dangerous goods. It can be transported under normal conditions without specific ADR, RID or IATA hazardous goods classification.

8. Individual protection measures

Before sanding, it is recommended to perform a risk assessment and select personal protective equipment according to the specific application and the material being ground. During grinding and sanding operations, hazardous dust from the workpiece material may be generated. National regulations on occupational exposure limits must be observed.

• Respiratory protection: Use suitable respiratory protective equipment when dust cannot be adequately controlled by extraction.
• Hand protection: Wear appropriate protective gloves.
• Eye and face protection: Wear protective goggles or a face shield.
• Hearing protection: Use hearing protection where noise levels from machinery require it.
• Body protection: Use protective clothing suitable for the work environment and material being sanded.

*Contenido generado por IA