What is COMPOUND PRO MAX P13 and why choose it
COMPOUND PRO MAX P13 by NauticClean is an ultra-abrasive, silicone-free polish designed for the pre-polishing stage of surface restoration. Its formula contains micro-crystals selected for their very high cutting power, making it suitable for eliminating deep scratches and preparing very damaged paints and gelcoats. It is particularly effective on extremely dull or heavily oxidised surfaces.
Main features
- Ultra-abrasive polish with heavy-cut micro-crystals.
- Ideal for the pre-polishing stage on severely damaged surfaces.
- Effectively removes deep scratches.
- Restores extremely dull or heavily oxidised paints and gelcoats.
- Very high abrasive power for fast correction.
- Silicone-free formula.
- Can be applied by machine polisher or by hand.
- Available in 500 ml (16.9 oz) and 1 l (33 oz) bottles.
Technical specifications
- Physical state: viscous.
- Colour: white.
- pH: ca. 7.
- Density: ca. 1.32.
- Silicone-free.
- Storage conditions: keep tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
- References and packaging:
- NCP13.5ML-500: bottle 500 ml / 16.9 oz.
- NCP13.5ML-1: bottle 1 l / 33 oz.
Applications and use cases
- Pre-polishing of very damaged paintwork.
- Correction of deep scratches on paints and gelcoats.
- Refurbishing extremely dull or heavily oxidised surfaces.
- Preparation of the surface before applying finer polishes for a high-gloss, high-protection finish.
Instructions for use
- Respect usual safety measures for the use of chemical products and wear appropriate individual protection equipment.
- Apply the product to the surface to be treated with a brush or with the polisher turned off.
- Work on one zone at a time.
- Polish the treated area using a polisher equipped with high density foam buffing pads until the desired result is achieved.
- The product can also be applied by hand using a microfibre cloth, although use of a polisher is recommended.
- For a perfect high-gloss, high-protection finish, it is recommended to continue the process with NCP13 PRO-CUT, NCP12 PRO-MEDIUM and NCP11 PRO-FINE.
FAQ
1. What type of surfaces is COMPOUND PRO MAX P13 designed for?
It is designed for very damaged paints and gelcoats, especially when they are extremely dull or heavily oxidised.
2. Does the product contain silicone?
No, COMPOUND PRO MAX P13 is silicone-free.
3. Can I apply the product by hand?
Yes, it can be applied by hand using a microfibre cloth, although using a polisher is recommended for best results.
4. What equipment should I use with a polisher?
Use high density foam buffing pads with the polisher.
5. On which stage of polishing should I use COMPOUND PRO MAX P13?
It is intended for the pre-polishing stage, particularly for heavy correction and scratch removal.
6. How should I store the product?
Keep the container tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
7. What should I do after using COMPOUND PRO MAX P13?
For a high-gloss, high-protection finish, it is recommended to apply NCP13 PRO-CUT, NCP12 PRO-MEDIUM and NCP11 PRO-FINE afterwards.
8. What is the pH of the product?
The pH is approximately 7.
9. In which packaging sizes is it available?
It is available in 500 ml (16.9 oz) and 1 l (33 oz) bottles.
10. Is there any disclaimer regarding product use?
The manufacturer disclaims all responsibility for handling, storage, use or disposal of the product that differs from the recommendations given.
Section 14 – Transport information
Consultar ficha técnica del fabricante.
Section 8 – Individual protection measures
Respect usual safety measures for the use of chemical products and wear the appropriate individual protection equipment. Consultar ficha técnica del fabricante.
*Contenido generado por IA
