What is Bostik CONTACT 1465 and why choose it?
Bostik CONTACT 1465 is a general-purpose contact adhesive designed for quick, strong and flexible bonding in DIY, construction, carpentry, upholstery and general industry. Based on polychloroprene rubber with synthetic resins and stabilisers, it provides immediate and permanent bonds with good resistance to temperature and humidity. It is suitable for brushing, rolling or trowel application, making it versatile for workshop and on-site work.
Main features
- Immediate and permanent bond – once the parts are joined and pressed, the adhesion is instant and definitive.
- Good temperature resistance – maintains bond strength between approximately 70°C and 90°C.
- Humidity-resistant – suitable for applications where occasional moisture exposure is expected.
- Flexible bonding – accommodates slight movements and vibrations without cracking.
- Wide material compatibility – adheres to wood and laminates, leather and similar materials, rubber and elastomers, polyester, rock wool, ceramics and metals.
- Multiple application methods – can be applied with brush, roller or notched trowel.
- High performance – recommended consumption of 120–150 g/m² on each side.
- Flammable contact adhesive – highly flammable liquid and vapour (Flam. Liq. Category 2, H225) requiring careful handling and storage.
Technical specifications
- Chemical base: polychloroprene rubber, synthetic resins and stabilisers.
- Physical state: viscous liquid.
- Colour: amber.
- Application methods: brush, roller or (notched) trowel.
- Viscosity: approximately 2500 cps.
- Service temperature resistance: approximately 70°C to 90°C.
- Flammability: flammable adhesive.
- Flash point of adhesive: below 0°C.
- Solid content: about 19.5%.
- Water solubility: insoluble in water.
- Recommended storage temperature: between +5°C and +25°C; do not freeze.
- Shelf life: 18 months in unopened original packaging stored between +5°C and +25°C.
- Typical coverage: 120–150 g/m² per side.
- Cleaning: use Bostik Agosolvant contact adhesive cleaner.
- Hazard classification (CLP):
- Flam. Liq. 2 – Highly flammable liquid and vapour (H225).
- Skin Irrit. 2 – Causes skin irritation (H315).
- Eye Irrit. 2 – Causes serious eye irritation (H319).
- Skin Sens. 1 – May cause an allergic skin reaction (H317).
- STOT SE 3 – May cause drowsiness or dizziness (H336).
- Aquatic Chronic 2 – Toxic to aquatic life with long lasting effects (H411).
- Main hazardous components (mixture): hydrocarbons C7–C8 cyclics; hydrocarbons C6–C7 (n-alkanes, isoalkanes, cyclic); acetone; methyl ethyl ketone; rosin; formaldehyde polymer with 4-(1,1-dimethylethyl)phenol; n-hexane contained in UVCB; xylene (reaction mass of ethylbenzene and xylene); 2,5-di-tert-pentylhydroquinone.
- Packaging formats:
- 55 ml blister tube (code 30600804)
- 125 ml box tube (code 30600836)
- 250 ml can (code 30600837)
- 500 ml can (code 30600838)
- 1 l can (code 30600846)
- 5 l can (code 30600847)
- 25 l can (code 30600848)
Applications and use cases
Construction industry
- Bonding of laminated plastics and decorative high-pressure laminates.
- Fixing of acoustic panels.
- Bonding of wood, laminates and rock wool panels to various substrates.
Carpentry and upholstery
- Adhering plywood and edging strips.
- Bonding plastics, upholstery materials, leather, foams and fabrics.
General industry
- Bonding rubber components and plastics.
- Adhesion of packaging materials.
- Bonding of metals to compatible substrates.
DIY and repair
- Small and medium bonding tasks with wood, plastics, rubber, leather and fabrics.
- Repair of decorative laminates or edges in furniture.
- General household and workshop repairs where a quick, strong contact bond is required.
Basic application instructions
- Ensure both surfaces are clean and dry.
- Stir the adhesive, then apply a uniform coat to each surface using a brush, spatula or notched trowel.
- On very absorbent surfaces, apply a second coat after about 20 minutes.
- Allow the adhesive to dry until it no longer transfers to the touch (approximately 10–15 minutes).
- Align the parts carefully, bring them together and apply strong pressure over the entire area, especially along the edges and joints, ensuring no air pockets remain.
- After drying, you have about 30 minutes to make the bond.
- The bond is immediate, but the joint should not be heavily stressed during the first 24 hours.
FAQ – Bostik CONTACT 1465
-
1. What materials can I bond with Bostik CONTACT 1465?
It is suitable for most common materials: wood and laminates, laminated plastics, acoustic panels, leather and similar materials, rubber and caoutchouc, polyester, rock wool, ceramics and metals.
-
2. How is the adhesive applied?
Apply a regular, even layer to each surface with a brush, roller or notched trowel. For very absorbent substrates, a second coat after about 20 minutes is recommended.
-
3. How long should I wait before joining the parts?
Allow 10–15 minutes, until the adhesive is dry to the touch and does not stain the finger when touched lightly.
-
4. How much open time do I have to make the bond?
Once dry, you have approximately 30 minutes to bring the two surfaces together and press them firmly.
-
5. When does the joint reach full strength?
The adhesion is immediate after pressing, but the joint should not be heavily loaded during the first 24 hours.
-
6. How do I clean tools and excess adhesive?
Use Bostik Agosolvant contact adhesive cleaner while the adhesive is still fresh.
-
7. How should the product be stored?
Keep containers tightly closed in a cool, dry, well-ventilated place between +5°C and +25°C. Do not expose to heat, flames or sparks and do not freeze. Shelf life is 18 months in unopened original packaging.
-
8. Is the product flammable?
Yes. It is a highly flammable liquid and vapour. Keep away from heat, hot surfaces, sparks, open flames and any other ignition sources. Do not smoke during application or storage.
14. Transport information
Bostik CONTACT 1465 is classified as a dangerous good for transport.
ADR/RID (road/rail)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Class: 3 (flammable liquids)
- Packing group: II
- Description: UN1133, Adhesives, 3, II, (D/E), Environmentally Hazardous
- Environmental hazards: yes
- Classification code: F1
- Tunnel restriction code: (D/E)
- Limited quantity (LQ): 5 l
- ADR hazard identification number (Kemmler): 33
IMDG (sea)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Class: 3
- Packing group: II
- Description: UN1133, Adhesives, 3, II, (-20°C c.c.), Marine pollutant
- Marine pollutant: yes (P)
- Limited quantity (LQ): 5 l
- EmS: F-E, S-D
IATA/ICAO (air)
- UN number: UN1133
- UN proper shipping name: Adhesives
- Class: 3
- Packing group: II
- Description: UN1133, Adhesives, 3, II
- Environmental hazards: yes
- Special provisions: A3
- Limited quantity (LQ): 1 l
- ERG code: 3L
8. Personal protective measures
When handling Bostik CONTACT 1465, follow the safety instructions from the safety data sheet:
- General measures: use only outdoors or in well-ventilated areas. Avoid breathing vapours or mists. Keep away from heat, hot surfaces, sparks, open flames and any other ignition sources. No smoking.
- Hand protection: wear suitable protective gloves. The breakthrough time depends on glove material, thickness and temperature.
- Eye and face protection: wear tight-sealing safety goggles and, where splashes are likely, a face shield.
- Skin and body protection: wear antistatic footwear and fire/flame-resistant clothing or other suitable protective clothing. Avoid contact with skin and clothing.
- Respiratory protection: if ventilation is inadequate, wear appropriate respiratory protection. For vapours, aerosols or sprays, use an organic vapour filter conforming to EN 14387 and suitable respiratory device.
- Hygiene measures: do not eat, drink or smoke when using the product. Wash hands before breaks and after work. Remove contaminated clothing and wash before reuse. Contaminated work clothing should not leave the workplace.
- Environmental protection: prevent product from entering drains, soil or surface waters; it is toxic to aquatic life with long lasting effects.
Contenido generado por IA
