What TOPCOAT SPRAY STANDARD REDUCER is and why choose it
Awlgrip TOPCOAT SPRAY STANDARD REDUCER (T0003) is a solvent blend formulated as a standard reducer for spray-applied urethane topcoats. It is designed for use with Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats, as well as specified Awlgrip primers. At typical application and cure temperatures between 70–90°F (21–32°C), T0003 keeps the paint film open long enough for good flow and leveling, yet evaporates quickly enough to deliver proper dry and dust-free times.
Main features
- Standard spray reducer for urethane topcoats specifically matched to Awlgrip, Awlcraft 2000 and Awlcraft SE systems.
- Optimized for 70–90°F (21–32°C) application and cure conditions to balance flow, leveling and drying.
- Supports good film appearance by keeping the paint film open for proper flow while preventing excessive dry times.
- Compatible with selected primers, including Quik-Grip Primer and Awlbrite Quik-Fil Clear.
- High-solvent VOC reducer with a VOC value of 930 g/L (7.8 lbs/gal).
- Flammable liquid and vapor with a low flash point, formulated for professional spray operations.
Technical characteristics
Chemical composition (hazardous ingredients)
- 2-Propanol, 1-methoxy-, propanoate (CAS 148462-57-1): 50–75% by weight.
- Ethyl acetate (CAS 141-78-6): 25–50% by weight.
- Benzene, methyl- (toluene) (CAS 108-88-3): 10–25% by weight.
Physical and chemical properties
- Physical state: Liquid.
- Color: Colorless.
- Specific gravity: 0.922962.
- Boiling point: 171°F.
- Flash point: 29°F (–2°C).
- Vapor density: Heavier than air.
- Evaporation rate: Slower than ether.
- VOC content: 930 g/L or 7.8 lbs/gal (product data sheet).
- VOHAP content (as supplied): 105.36 g/L of paint; 10535.71 g/L of solid coating.
- pH: Consultar ficha técnica del fabricante.
Stability and reactivity
- Chemical stability: Stable; hazardous polymerization will not occur.
- Sensitivity: Not sensitive to mechanical impact.
- Conditions to avoid: Excessive heat and improper handling that can generate fumes.
- Incompatible materials: Strong oxidizing agents.
- Hazardous decomposition products: Carbon dioxide and carbon monoxide when heated to decomposition (such as during welding).
Health and safety classification
- HMIS rating: Health 2*; Flammability 3; Reactivity 0.
- Acute inhalation effects: Harmful if inhaled; causes nose and throat irritation; vapors may affect the brain or nervous system causing dizziness, headache or nausea.
- Eye contact: Risk of serious damage to eyes.
- Skin contact: Causes skin irritation; repeated contact can cause dermatitis; may be harmful if absorbed through the skin.
- Ingestion: Harmful if swallowed; may cause abdominal pain, nausea, vomiting, diarrhea or drowsiness.
- Chronic effects: Birth defect hazard; contains an ingredient that can cause birth defects.
Applications and uses
Compatible coating systems
- Awlgrip topcoats: Standard reducer for spray-applied Awlgrip urethane topcoats.
- Awlcraft 2000 topcoats: Suitable for spray applications within the specified temperature range.
- Awlcraft SE topcoats: Recommended reducer for standard spray conditions.
- Primers: Recommended for use in Quik-Grip Primer and Awlbrite Quik-Fil Clear.
Recommended temperature range
- Application and cure temperatures: 70–90°F (21–32°C).
- Within this range, T0003 keeps the coating film open to allow proper flow and leveling while still supporting adequate drying and dust-free times.
Mixing and reduction guidance
All reducers for Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats, including T0003, can be blended with each other in any ratio to fine-tune flow and evaporation rates. Most Awlgrip and Awlcraft 2000 topcoats recommend up to 25% reduction, calculated from the combined total of the base and converter components.
- General reduction guideline for topcoats: Up to 25% reducer based on the total mixed base and converter volume.
- Temperature adjustment: At higher temperatures, reducers evaporate faster; increasing the amount of reducer in the mix by 5–10% can help compensate.
Specific mixing ratios and application techniques depend on the coating system in use. Consultar ficha técnica del fabricante.
Storage and handling
- Recommended storage temperature: 40–100°F (4–38°C).
- Handling precautions: Keep away from heat, sparks and flame. Do not smoke during use. Turn off stoves, heaters, electric motors and other ignition sources during application and until vapors have dissipated.
- Prevent vapor build-up by opening windows and doors to achieve cross-ventilation. Avoid contact with eyes, skin and clothing. Close container after each use and wash thoroughly after handling.
Frequently asked questions (FAQ)
1. What is the main purpose of TOPCOAT SPRAY STANDARD REDUCER T0003?
It is a standard reducer for spray-applied urethane topcoats, formulated to control flow, leveling and evaporation rate when using Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats in typical ambient temperatures.
2. In what temperature range should T0003 be used?
T0003 is recommended when application and cure temperatures are between 70–90°F (21–32°C).
3. Can T0003 be blended with other Awlgrip reducers?
Yes. All listed reducers for Awlgrip, Awlcraft 2000 and Awlcraft SE topcoats can be blended with each other in any ratio to fine-tune flow and evaporation rates.
4. What VOC level does T0003 have?
T0003 has a VOC content of 930 g/L or 7.8 lbs/gal.
5. Is T0003 suitable for brushing applications?
No. T0003 is specified as a standard reducer for spray-applied urethane topcoats. For brushing or rolling, other reducers such as T0031 are recommended in the product data sheet.
6. With which primers can T0003 be used?
T0003 is also recommended for use in Quik-Grip Primer and Awlbrite Quik-Fil Clear.
7. What are the main health hazards associated with T0003?
It is harmful if inhaled or swallowed, causes eye and skin irritation, and prolonged solvent overexposure has been associated with permanent brain and nervous system damage. It also contains an ingredient that can cause birth defects.
8. How should spills of T0003 be handled?
Eliminate all ignition sources, use non-sparking tools and absorbent materials, prevent entry into waterways and confined areas, and isolate the area. For large spills, initial downwind evacuation distances are recommended in the safety data sheet.
9. Is T0003 flammable?
Yes. It is a flammable liquid and vapor with a very low flash point, and its vapors may form explosive mixtures with air.
10. Can T0003 be used in all coating systems?
No. It is specifically identified for use with Awlgrip, Awlcraft 2000, Awlcraft SE topcoats and specified primers. It should not be used in other systems unless approved. Consultar ficha técnica del fabricante.
Section 14 – Transport information
- DOT proper shipping name (domestic surface transport): Paint Related Material.
- DOT hazard class: 3.
- UN/NA number: UN 1263.
- DOT packing group: II.
- CERCLA/DOT reportable quantity: 1139 gal / 8760 lbs.
- IMO/IMDG proper shipping name (ocean transport): Paint Related Material.
- IMDG hazard class: 3.2 – Intermediate flashpoint flammable liquids.
- IMDG packing group: II.
Additional or region-specific transport details may apply. Consultar ficha técnica del fabricante.
Section 8 – Personal protective measures
Respiratory protection
- Select respiratory equipment to protect against the ingredients listed in the hazardous ingredient section.
- Ensure fresh air entry during application and drying.
- If eye watering, headache, dizziness, or air monitoring indicates dust, vapor or mist levels above applicable limits, wear an appropriate, properly fitted NIOSH-approved respirator during and after application.
- Follow the respirator manufacturer’s instructions for selection, fit and use.
Eye and face protection
- Avoid contact with eyes.
- Depending on site-specific conditions, use safety glasses, chemical goggles and/or head and face protection to prevent splashes.
- Protective eye and face equipment must be thoroughly cleaned or discarded after each use.
Skin and hand protection
- Use protective equipment designed to protect against the specific chemicals present in the reducer.
- Depending on conditions of use, wear protective gloves, aprons, boots and appropriate head and face protection to avoid skin contact.
- All protective equipment must be thoroughly cleaned or discarded after each use.
Engineering controls and hygiene measures
- Prevent build-up of vapors by opening windows and doors to achieve cross-ventilation.
- Provide emergency eyewash fountains and safety showers in the immediate vicinity of any potential exposure.
- Use good personal hygiene practices: wash hands before eating, drinking or using toilet facilities.
- Promptly remove soiled clothing and wash thoroughly before reuse; shower after work using plenty of soap and water.
