PROTECTWRAP FILM STRONG SELF-ADHESIVE UV PROTECTOR

What is PROTECTWRAP FILM STRONG SELF-ADHESIVE UV PROTECTOR and why choose it

PROTECTWRAP FILM STRONG SELF-ADHESIVE UV PROTECTOR is a transparent, self-adhesive protection film designed to cover and protect suitable surfaces. It combines a polyethylene (PE) film with an acrylate adhesive, offering strong adhesion to steel and high mechanical resistance. The film is UV-stabilized for use in daylight for up to 6 months and maintains its adhesive performance when stored correctly.

Main features

• Transparent self-adhesive protection film.
• Film thickness: 100 µm.
• Strong adhesion to steel (16 g classification).
• High tensile strength in both machine and transverse directions.
• Very high elongation at break for good mechanical resistance.
• UV exposure stability for up to 6 months in daylight.
• Supplied in rolls of 600 mm x 100 m.
• PE film with acrylate adhesive.
• Storage time up to 6 months without loss of adhesive when stored correctly.

Technical specifications

• Density: approx. 0.925 g/cm³
• Film thickness: 100 µm
• Tensile strength, machine direction: > 33 N/mm²
• Tensile strength, transverse direction: > 25 N/mm²
• Elongation at break, machine direction: > 300 %
• Elongation at break, transverse direction: > 560 %
• Adhesion to steel: Strong (16 g)
• Dimensions: 600 mm x 100 m, transparent
• Film / adhesive material: PE / Acrylate
• Storage time: 6 months (no loss of adhesive)
• Recommended storage temperature: +10 °C to +40 °C
• UV exposure stability: 6 months (daylight)

Applications and use instructions

Surface preparation

• The surface must be clean, dry and free of grease.

Application method

• The film must be laminated without folds and blisters.
• Application is carried out by laminating with rolls (walzenkaschierung / laminating with rolls).

Removal conditions

• The ambient temperature during removal should be between +5 °C and +50 °C.
• The film must not be removed under frost conditions (temperatures below 0 °C).

User responsibility

• The user must test the suitability of the film for the intended application.
• Tests should consider thermal and mechanical demands and the planned period of use.
• All recommendations in the technical data sheet are non-binding and exclude liability for damages or disadvantages of any kind, including with respect to third-party rights.

FAQ

1. What is the thickness of PROTECTWRAP FILM STRONG SELF-ADHESIVE UV PROTECTOR?

The film thickness is 100 µm.

2. How strong is the adhesion?

The film has strong adhesion to steel, classified as Strong (16 g).

3. How long can the film be stored without losing adhesion?

It can be stored for up to 6 months without loss of adhesive, under the recommended storage conditions.

4. What is the recommended storage temperature?

The recommended storage temperature is between +10 °C and +40 °C.

5. How resistant is the film to UV radiation?

The film is stable under daylight exposure for up to 6 months.

6. What are the dimensions of each roll?

Each roll is 600 mm wide and 100 m long, transparent.

7. What is the base material and adhesive of the film?

The film is made of PE (polyethylene) with an acrylate adhesive.

8. At what temperatures can I remove the film?

The ambient temperature during removal should be between +5 °C and +50 °C. The film should not be removed in frost conditions.

9. What should I check before using the film in my process?

The user must test the applicability of the film regarding thermal and mechanical load and the intended period of use.

10. Does the manufacturer guarantee specific properties beyond these values?

No. The given values are average values and do not constitute a guaranteed assurance of specific properties.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Consultar ficha técnica del fabricante.

*Contenido generado por IA