What it is and why choose it
PROTECTWRAP B1 is a self-adhesive, transparent protection film designed to be laminated onto clean, dry and non-greasy surfaces. Thanks to its strong adhesive and high elongation and tensile strength, it provides reliable temporary protection while remaining easy to remove within the recommended conditions.
Main features
- Self-adhesive protection film for surfaces.
- Transparent film, also available in white according to the datasheet dimension description.
- High elongation at break in both machine and transverse directions.
- Strong adhesion to steel (18 g, classified as strong).
- PE film with acrylate adhesive.
- Stable adhesive properties during the indicated storage period.
- Defined storage temperature and UV exposure limits.
Technical specifications
- Density: approx. 0.925 g/cm³
- Film thickness: 100 µm
- Tensile strength (machine direction): > 33 N/mm²
- Tensile strength (transverse direction): > 25 N/mm²
- Elongation at break (machine direction): > 300 %
- Elongation at break (transverse direction): > 560 %
- Adhesion to steel: strong (18 g)
- Dimensions and design: 500 mm x 100 m, transparent / white
- Film / adhesive material: PE / acrylate
- Storage time: 6 months (no loss of adhesive)
- Storage temperature: +10 °C to +40 °C
- Exposure to UV radiation (stability in daylight): 3 months (daylight)
Applications and use instructions
Surface preparation
- The surface must be clean, dry and non-fat before application.
Application method
- The film must be laminated without folds and blisters.
- Laminating with rolls is indicated.
Removal conditions
- The environmental temperature during removal should be between +5 °C and +50 °C.
- The film must not be removed under frost conditions.
Notes on suitability and responsibility
- The user must test the applicability of the film for the specific thermal and mechanical demands and the intended period of use.
- The information provided in the technical datasheet is based on average values and does not represent a guaranteed assurance of specific properties.
- The information refers to the material in the state in which it leaves the manufacturer and does not cover modifications by subsequent processing or handling.
FAQ
-
What type of material is the film and adhesive made of?
The film is made of PE and the adhesive is acrylate.
-
What is the thickness of PROTECTWRAP B1?
The film thickness is 100 µm.
-
How long can I store the film without losing adhesive strength?
The indicated storage time is 6 months with no loss of adhesive.
-
Which storage temperature is recommended?
The recommended storage temperature is between +10 °C and +40 °C.
-
How long is the film stable under UV exposure?
The film is specified as stable for 3 months under daylight exposure.
-
How should the surface be prepared before application?
The surface must be clean, dry and free of grease.
-
How should the film be applied?
It should be laminated without folds and blisters, for example by laminating with rolls as indicated.
-
At what temperature can I remove the film?
The environmental temperature during removal should be between +5 °C and +50 °C. Removal during frost is not permitted.
-
Does the datasheet guarantee specific properties?
No. The values given are average values and do not constitute a guaranteed assurance of specific properties.
-
Who is responsible for checking suitability for a specific application?
The user is responsible for testing and confirming the suitability of the film for the intended thermal and mechanical demands and duration of use.
Section 14 – Transport information
Consultar ficha técnica del fabricante.
Section 8 – Individual protection measures
Consultar ficha técnica del fabricante.
*Contenido generado por IA
