ZIP DOOR CAT. NO. 42728 – (120 X 30 CM)

What is the ZIP DOOR CAT. NO. 42728 (120 x 30 cm) and why choose it

The ZIP DOOR CAT. NO. 42728 (120 x 30 cm) is a U-shaped zip door accessory designed to create a convenient, resealable access opening in shrink-wrapping or protective sheeting systems. With a width of 120 cm and a vertical opening of 30 cm, this zip door improves user comfort by allowing quick entry and exit without having to remove or cut large sections of the film. Information about this specific model is based on manufacturer catalogues but some details remain unverified and may vary depending on the distributor.

Main features

• U-shaped zip door accessory for shrink-wrapping and protective sheeting systems (information derived from Guilbert Express shrink-wrapping catalogues; exact configuration for the Retractilado brand may not be fully verified).
• Nominal size: 120 x 30 cm (approx. 47 x 12 in), suitable for creating a compact access opening in plastic sheeting.
• Designed to improve comfort and accessibility in enclosed or wrapped areas by providing a reusable opening.
• Intended for use as an accessory in shrink-wrapping applications such as temporary protection, storage, or enclosure systems.
• Easy to assemble and fold according to available catalog information from similar Cat. No. 42728 products; exact installation method should be confirmed with the official technical documentation.

Technical specifications

The following technical data are based on information available from similar Cat. No. 42728 U-shaped zip doors in shrink-wrapping catalogues and may not be fully verified for this specific "Retractilado" variant. Values and materials should be checked against the official technical data sheet before critical use.

• Category / type: U-shaped zip door accessory for shrink-wrapping and protective film systems.
• Catalogue number: 42728.
• Nominal dimensions: 120 x 30 cm (approx. 47 x 12 in). Dimensioning is taken from current shrink-wrapping catalogues for Cat. No. 42728-type products.
• Configuration: Zip door forming a U-shaped access opening in a plastic or shrink-wrap surface (information not fully verified for this brand).
• Typical use environment: Industrial, marine, construction or storage applications where shrink-wrap or protective plastic sheeting is used. Specific certifications, flame retardancy and exact material composition are not verified.

Applications and use cases

The ZIP DOOR CAT. NO. 42728 (120 x 30 cm) is intended as an accessory to improve accessibility and comfort in shrink-wrapped or enclosed areas. Typical, non-exhaustive applications include:

• Boat and vehicle winter storage: Creating a service access in shrink-wrapped boats, vehicles or equipment so users can enter the protected area without removing the wrap. (Application inferred from common use of similar U-shaped zip doors in ship winter storage accessories; not brand-specific.)
• Temporary protection enclosures: Access points in temporary covers installed over machinery, pallets, scaffolding or materials protected with shrink film.
• Maintenance hatches: Forming a small, resealable opening for inspection, repair or cable routing in larger plastic covers.
• Construction and renovation dust protection (non-verified): When integrated into suitable plastic screening, a U-shaped zip door can help create access through dust barriers while limiting particle spread. The suitability of this particular product for dust control should be confirmed with the official documentation.

FAQ

1. What exactly is the ZIP DOOR CAT. NO. 42728 (120 x 30 cm)?

It is a U-shaped zip door accessory, with a nominal size of 120 x 30 cm, designed to be integrated into shrink-wrapping or protective plastic sheeting to create a resealable access opening. Some details for the Retractilado version are not fully verified and should be checked against the official technical data sheet.

2. What material is the zip door made of?

The specific material composition (type of plastic, textile or zip material) is not clearly indicated in the available public information. Only the size and use as a U-shaped zip door accessory for shrink-wrapping are documented in similar catalogues. For precise material data, consult the official technical documentation.

3. Can this zip door be used outdoors?

U-shaped zip doors of this type are often used outdoors in boat and equipment winter storage applications. However, resistance to UV radiation, weather and temperature for this particular model has not been explicitly verified in the accessible information. Outdoor suitability should be confirmed with the manufacturer or distributor.

4. How is the ZIP DOOR CAT. NO. 42728 installed?

Available catalogue descriptions for similar products indicate that they are easy to assemble and fold, typically by integrating the zip door into the shrink-wrap or plastic sheeting during installation. The exact installation procedure, required tools and any adhesive or welding steps for this specific item are not detailed in the public information and should be verified in the official instructions.

5. Is the 120 x 30 cm size the total door size or the opening size?

The 120 x 30 cm dimensions refer to the nominal size associated with the U-shaped zip opening in manufacturer catalogues for Cat. No. 42728-type doors. Whether this measurement corresponds to the clear opening or to the complete assembly (including seams and borders) is not explicitly specified and should be confirmed with official technical documentation.

6. Is the product flame retardant?

There is no explicit, verified information confirming that this particular ZIP DOOR CAT. NO. 42728 is flame retardant. Unless the official technical sheet clearly declares flame-retardant performance and any relevant standards, this property should not be assumed.

7. With which films or shrink-wrap systems is it compatible?

In general, U-shaped zip doors like Cat. No. 42728 are designed to be compatible with standard shrink-wrap films and protective plastic sheeting used in industrial and marine applications. However, compatibility with specific film types, thicknesses or brands for the Retractilado product is not documented and should be checked with the supplier.

8. Can the zip door be reused once removed?

Information on reuse, expected service life and number of opening/closing cycles is not provided in the accessible data. Durability will depend on the material, environmental exposure and handling. For critical applications, ask the manufacturer or distributor for guidance on reuse.

9. Does it include mounting accessories?

The available catalogue references confirm the existence of the U-shaped zip door Cat. No. 42728 and its dimensions, but they do not clearly specify which mounting accessories (adhesives, tapes, fasteners) are supplied in each sales unit. This point should be verified with the official product documentation or commercial offer.

10. Is this description officially validated by the manufacturer?

No. This description has been generated based on the product name, brand and information available from similar Cat. No. 42728 U-shaped zip doors in public catalogues. Some data are not fully verified and may differ from the official specifications. It is recommended to consult the manufacturer’s or distributor’s technical data sheet for definitive information before making installation or safety decisions.

Transport information (Section 14)

Specific, verified transport information for ZIP DOOR CAT. NO. 42728 (120 x 30 cm) under ADR, IMDG, IATA or other transport regulations is not available in the public data consulted. As a general indication, U-shaped zip doors for shrink-wrapping are usually supplied as non-dangerous goods when they are made only of plastic and textile materials without hazardous substances, but this has not been confirmed for this particular product.

For precise classification, packaging instructions and any special transport conditions, the official safety documentation and the applicable transport regulations should always be consulted.

Individual protection measures (Section 8)

No specific, verified information has been found on mandatory personal protective equipment (PPE) for handling the ZIP DOOR CAT. NO. 42728 (120 x 30 cm). In the absence of an official safety data sheet, the following are general, non-binding recommendations for the handling and installation of plastic shrink-wrapping accessories:

• Hand protection: Use suitable work gloves to reduce the risk of cuts or abrasions when cutting or tensioning films and when manipulating zippers or cutting tools.
• Eye protection: When cutting shrink-wrap or plastic sheeting, it is advisable to wear safety glasses to protect against splinters or accidental tool slips.
• Skin and body protection: Wear work clothing that covers arms and legs when working with cutting tools or heat sources associated with shrink-wrapping systems.
• Respiratory protection: If the installation is performed in poorly ventilated areas or in combination with heating equipment for shrink-wrapping, an adequate ventilation system should be used and, if necessary, suitable respiratory protection according to the risk assessment.
• General handling: Follow the instructions of the shrink-wrap system being used, keep cutting tools in good condition and store the zip door away from ignition sources and high temperatures unless the official documentation specifies otherwise.

These measures are generic recommendations and do not replace the specific indications that must appear in the official safety or technical documentation of the product.

*Contenido generado por IA