HIGH-PERFORMANCE ABRASIVE PASTEPX 100

What is Riwax HIGH-PERFORMANCE ABRASIVE PASTE PX 100 and why choose it

Riwax HIGH-PERFORMANCE ABRASIVE PASTE PX 100 is a high-performance, coarse abrasive polishing compound designed for professional correction of automotive paintwork and other coated surfaces. It is suitable for removing deep scratches, sanding marks and heavy oxidation, restoring a clean and uniform finish in preparation for subsequent polishing or protection steps. According to available manufacturer and distributor information, PX 100 is intended for use on all types of topcoats and is commonly used as the first step in a multi-stage polishing system. Some details may vary by market and packaging, so certain information below is not fully verified and should be checked against the official technical data sheet.

Main features

• High-performance abrasive paste: Formulated to deliver fast and effective cutting action on weathered paint, deep scratches and faded surfaces.
• Coarse cutting grade: Designed as a strong cutting compound, typically used as the first step for heavy defect removal.
• Removes sanding scratches: Eliminates sanding marks in the approximate range of P1500 to P3000 grit (information based on manufacturer catalogues; exact range should be verified in the official data sheet).
• For all topcoats: Suitable for use on fresh and fully cured topcoat paints, according to available product catalogues.
• Professional PX system: Integrates into the Riwax PX system as the initial, heavy-cut step, typically followed by PX 200 (fine polish) and PX 300 (wax or protection product).
• Usable by machine or by hand: Can be applied with rotary or dual action polishers, or manually on small areas, depending on user preference and job requirements.
• High gloss finish for a coarse compound: Despite its strong cutting action, the paste is designed to leave a relatively high level of gloss, which can be further refined with finer polishes.

Technical specifications

The following points are based on product catalogues and distributor information and should be treated as indicative only. For exact technical specifications (composition, physical properties, and complete safety information), the official Riwax technical and safety data sheets must be consulted.

• Product type: High-performance abrasive paste / coarse sanding compound.
• Typical application: Removal of deep scratches, sanding marks (approx. P1500–P3000), heavy oxidation and severe weathering on painted surfaces.
• Compatible substrates: Automotive topcoats and similar paint finishes (fresh or fully cured), as per manufacturer catalogues. Specific compatibility with special coatings should be verified.
• Step in system: First step in the Riwax PX professional polishing system.
• Application method: Machine polishing (rotary or dual action) or manual application, depending on area size and defect severity.
• Country of brand origin: Riwax is a Swiss brand; exact manufacturing site for this specific product may vary and is not verified here.

Applications and use cases

• Professional detailing and bodyshops: Ideal for bodyshops and detailing centres that require fast removal of sanding marks after paint repair, spot repair or full resprays.
• Correction of weathered paint: Recommended for vehicles with strongly oxidised, dull or faded paint, where standard polishes do not provide sufficient correction.
• Removal of deep scratches and severe defects: Suitable for deeper defects that remain visible after milder polishing; used with the appropriate pad to maximise cutting performance.
• Preparation before fine polishing: Used as a first step before PX 200 or another fine polish, in order to refine the surface and remove holograms or micro-marring.
• Marine, industrial or other coated surfaces (to be verified): Some distributors present PX 100 in broader polishing ranges; however, use on non-automotive substrates (gelcoats, industrial coatings, etc.) should be validated through official documentation or testing.

FAQ

1. What type of product is Riwax PX 100?

   Riwax PX 100 is a high-performance, coarse abrasive paste (sanding compound) designed to remove heavy defects such as deep scratches, sanding marks and oxidation from painted surfaces.

2. On which surfaces can I use PX 100?

   Available catalogues describe PX 100 as suitable for all automotive topcoats, both fresh and fully cured. For special coatings, plastics or non-automotive substrates, compatibility should be verified with the official technical data sheet or by a controlled test on a small area.

3. Is PX 100 used alone or as part of a system?

   PX 100 is generally the first step in the Riwax PX system. After heavy defect removal with PX 100, a finer polish such as PX 200 is usually recommended, and finally a protection product such as PX 300.

4. Can I apply PX 100 by hand?

   Yes, the paste can be applied manually on small areas, but for consistent and efficient correction on larger surfaces, the use of a suitable polishing machine is recommended. The exact application procedure (pad type, speed, passes) should follow Riwax guidelines.

5. Does PX 100 leave holograms or haze?

   As a coarse abrasive compound, PX 100 may leave light haze or micro-marring depending on paint type, pad and technique. These marks are normally removed in a second step with a finer polish such as PX 200.

6. Is the information about sanding grit range exact?

   Public product catalogues indicate that PX 100 removes sanding scratches roughly in the P1500 to P3000 range. However, this range and performance can vary with technique and substrate, so it should be confirmed in the official technical data sheet.

7. Can PX 100 be used on freshly painted surfaces?

   Some Riwax sources mention use on fresh paint and fully cured paints. The minimum curing time of the coating before polishing depends on the paint system and should be validated with the paint manufacturer and the official Riwax documentation.

8. Does PX 100 provide long-term protection?

   No. PX 100 is a corrective abrasive paste. For long-term protection and enhanced gloss, the surface should be refined with a fine polish and then sealed or waxed with an appropriate protection product.

9. Where can I find exact safety and handling data?

   Exact safety, handling, storage and first-aid information is provided in the official Riwax safety data sheet (SDS) and technical data sheet (TDS) for PX 100. The summary above does not replace those documents.

10. Is all the information on this page verified?

    No. The description is based on manufacturer catalogues and distributor information available online and may not be complete or fully up to date. For critical decisions, always refer to the latest official Riwax documentation.

Section 14 – Transport information (summary)

Specific transport classification data (such as UN number, proper shipping name, transport hazard class, packing group and environmental hazards) for Riwax HIGH-PERFORMANCE ABRASIVE PASTE PX 100 could not be fully confirmed from public secondary sources. In many cases, abrasive polishing pastes of this type are not classified as dangerous goods for transport by road, sea or air, but this cannot be guaranteed for PX 100 without the official SDS.

For precise and legally valid information about transport under ADR/RID, IMDG, IATA or other regulations, the current official safety data sheet (Section 14) issued by Riwax must be consulted. The present text is only a general indication and should not be used as the sole reference for transport classification, labelling or documentation.

Section 8 – Individual protection measures (summary)

The detailed individual protection measures for Riwax PX 100 are specified in the official safety data sheet (Section 8: Exposure controls/personal protection). Since the full SDS could not be accessed in a verified form for this description, only generic recommendations based on typical abrasive polishing pastes are provided here and must be considered non-binding until confirmed by the manufacturer.

• General handling: Use the product in well-ventilated areas and avoid unnecessary exposure. Keep away from food, drink and animal feed. Wash hands thoroughly after use.
• Eye protection: The use of suitable safety goggles or face protection is generally recommended to avoid splashes or contact with eyes.
• Skin protection: Wear suitable protective gloves and work clothing to minimise prolonged or repeated skin contact, especially during professional or continuous use.
• Respiratory protection: Under normal use with adequate ventilation, respiratory protection may not be necessary. In confined spaces, when spraying, or if mist or aerosols can form, an appropriate respiratory protection device may be required. Exact requirements must be checked in the official SDS.
• Hygiene measures: Do not eat, drink or smoke while using the product. Remove contaminated clothing and wash before reuse. Avoid contact with eyes and skin; in case of contact, follow first-aid measures indicated in the SDS.

These measures are generic and may not reflect the specific classification, composition or risk profile of Riwax PX 100. For accurate personal protective equipment (PPE) requirements, occupational exposure limits and engineering controls, always consult the official safety data sheet supplied by Riwax.

*Contenido generado por IA