What it is and why choose it
NAUTICCLEAN 12 POLISH PRO-MEDIUM is a professional polishing compound based on new-generation micro-crystal abrasives (POLYGRAD). It is specially developed to recover aged or dull gelcoat and painted surfaces and restore their original gloss. Thanks to its fine abrasive power, silicone-free formula and high-gloss finish, it is ideal for professional maintenance of marine surfaces and other coated substrates where a controlled cut and bright result are required.
Main features
- Professional medium polish for restoration of weathered gelcoat or paint.
- Formulated with POLYGRAD micro-crystal abrasives for controlled, fine abrasion.
- Fine abrasive grade.
- Silicone-free.
- Delivers a high-gloss finish.
- Can be applied by hand; optimal results are obtained with a polishing machine.
- Recommended to be followed by P11 PRO-ULTRA FINE for maximum gloss and high-performance finishing.
- Available in 500 ml and 1 L containers.
Technical specifications
- Appearance: viscous liquid
- Colour: white
- Odour: aromatic
- pH at 20 °C: approximately 9
- Density at 20 °C: approximately 1
- Dynamic viscosity at 20 °C: approximately 30,000 mPas
- Water solubility/miscibility: partially miscible with water
- Flash point: > 65 °C
- Physical state: viscous
- Abrasivity scale (manufacturer indication): medium level
- Gloss scale (manufacturer indication): high level
- Composition (CE 648/2004 on detergents): < 5% aliphatic hydrocarbons, non-ionic surfactants; preservatives (Methylisothiazolinone, Benzisothiazolinone)
- Storage conditions: keep container tightly closed; protect from frost, heat, UV radiation and direct sunlight; store in a ventilated place.
Applications and use cases
- Restoration polish for aged or dull gelcoat surfaces.
- Restoration polish for painted surfaces where gloss has faded.
- Professional polishing operations requiring a fine, controlled abrasive action and silicone-free formula.
- Material used as polishing agent and preservative agent as indicated in the safety data sheet.
Directions for use
- Apply NAUTICCLEAN 12 POLISH PRO-MEDIUM using a polishing machine equipped with a medium-hardness polishing sponge.
- The product can also be applied and finished manually if necessary.
- For a high-performance finish and maximum gloss, apply and polish afterwards with P11 PRO-ULTRA FINE.
FAQ
1. On which surfaces can I use NAUTICCLEAN 12 POLISH PRO-MEDIUM?
It is developed to recover aged gelcoat or painted finishes and restore their gloss.
2. Is the product silicone-free?
Yes, the formulation is free from silicones.
3. What type of abrasive does it contain?
It contains fine abrasives with POLYGRAD micro-crystal technology.
4. How should I apply the product for best results?
Apply with a polishing machine fitted with a medium-hardness polishing sponge. Manual application and finishing are possible, but machine polishing is recommended for optimal results.
5. Do I need a second polish after using PRO-MEDIUM?
For a high-performance surface and maximum gloss, it is recommended to follow with P11 PRO-ULTRA FINE.
6. What packaging sizes are available?
The product is available in 500 ml and 1 L containers.
7. What is the pH of the product?
The pH at 20 °C is approximately 9.
8. Can it be diluted with water?
The product is partially miscible with water, according to the safety data sheet.
9. Does it have any specific storage requirements?
Store in a tightly closed container, protected from frost, heat, UV radiation and direct sunlight, in a ventilated area.
10. Is additional safety information available?
Consultar ficha técnica del fabricante.
Section 14: Transport information
- UN number (ADR, ADN, IMDG, IATA): suprimido.
- Proper shipping name (ADR, ADN, IMDG, IATA): suprimido.
- Transport hazard classes (ADR, ADN, IMDG, IATA): suprimido.
- Packing group (ADR, IMDG, IATA): suprimido.
- Environmental hazards: not applicable.
- Special precautions for user: not applicable.
- Bulk transport according to MARPOL Annex II and the IBC Code: not applicable.
- UNECE Model Regulation: suprimido.
Section 8: Personal protective measures
- General protective and hygiene measures: observe normal safety measures for handling chemical products.
- Respiratory protection: not necessary under normal conditions of use.
- Hand protection: use protective gloves made from material impermeable and resistant to the product. The choice of glove material must consider breakthrough times, permeability and degradation; follow glove manufacturer recommendations.
- Eye protection: use protective goggles during product transfer.
- Body protection: wear protective work clothing.
- Additional technical installation measures: Consultar ficha técnica del fabricante.
