3M PERFECT-IT WHITE ROTORBITAL FOAM POLISHING BONNET 150 MM 2/UNIT*

What it is and why choose it

The 3M Perfect-It White Rotorbital Foam Polishing Bonnet 150 mm is a medium-density foam polishing pad designed for use with the 3M Perfect-It rotorbitral polishing system. Engineered for professional automotive paint finishing and detailing, it helps achieve a high-gloss finish on a wide range of paints and clear coats with no swirl marks, holograms or excessive heat build-up when used as directed.

Specifically sized at 150 mm, this bonnet is intended for rotorbitral polishers equipped with a 150 mm backing plate, providing controlled, comfortable operation and consistent results.

Main features

• Foam polishing bonnet designed for rotorbitral polishing.
• Diameter 150 mm for use with 150 mm backing plates.
• Medium-density, thick foam for controlled cutting and finishing.
• White foam composition suitable for use with 3M Perfect-It rotorbitral polishes.
• Part of the 3M Perfect-It rotorbitral finishing system for high-gloss results without swirl marks or holograms.

Technical specifications

• Product type: Polishing bonnet.
• Bonnet diameter: 150 mm.
• Material: Coarse foam.
• Colour: White.
• Foam thickness: 25 mm.
• Density: Medium.
• Recommended tool: 3M Perfect-It rotorbitral polisher with 150 mm backing plate.
• Typical tool orbit: Consultar ficha técnica del fabricante.
• Recommended tool speed with foam bonnet: spread polish at speed setting 2, then increase up to speed 4 maximum.

Applications and use cases

The 3M Perfect-It White Rotorbital Foam Polishing Bonnet 150 mm is intended for professional paint finishing and detailing tasks in the automotive repair sector. Typical uses include:

• Polishing and finishing of automotive paints and clear coats as part of the 3M Perfect-It rotorbitral system.
• Removing defects and surface marks using 3M Perfect-It rotorbitral polishes according to the instructions for abrasive and finishing polishes.
• Working in small areas of approximately 60 cm x 60 cm to ensure effective removal of defects or swirl marks.

Basic instructions for use (foam bonnet)

1. Ensure the surface is clean before starting.
2. Apply polish to the bonnet in a circular pattern between the edge and the centre of the foam. If additional material is needed, apply a small amount to the pad.
3. Place the bonnet flat on the surface and start at speed setting 2 to spread the polish.
4. Increase speed as required up to speed setting 4 maximum.
5. Work with light pressure, following a cross-hatch pattern (north/south, east/west) on areas of about 60 cm x 60 cm.
6. Use a 3M Perfect-It High Performance Cloth to remove any remaining film after polishing.
7. Clean the bonnet frequently with a brush or conditioning tool for optimal performance.

FAQ

1. What backing plate size is this bonnet designed for?

This foam polishing bonnet is designed for use with 150 mm backing plates on 3M Perfect-It rotorbitral polishers.

2. What type of material is the bonnet made from?

It is made from coarse, medium-density white foam.

3. What is the thickness of the foam?

The foam layer has a thickness of 25 mm.

4. For what kind of work is this bonnet recommended?

It is intended for professional automotive paint finishing and detailing within the 3M Perfect-It rotorbitral system, helping to achieve a high-gloss finish without swirl marks or holograms when used with the corresponding 3M polishes.

5. What speeds should I use on the rotorbitral polisher?

With foam bonnets, start at speed setting 2 to spread the polish and increase as desired up to speed setting 4 maximum.

6. How should I apply the polish on the foam bonnet?

Apply the polish to the bonnet in a circular pattern between the edge and the centre of the foam. If more product is required, add a small additional amount to the pad.

7. How large an area should I polish at one time?

Work on small areas of approximately 60 cm x 60 cm at a time for proper defect removal and finishing.

8. How do I maintain the bonnet during use?

Clean the bonnet frequently with a brush or conditioning tool to maintain optimal performance.

9. How should the product be stored?

Store in the original, unopened container at a standard ambient temperature of 21 °C and 50 percent relative humidity. Avoid storage above 38 °C or below 5 °C and protect from freezing.

Section 14. Transport information

Consultar ficha técnica del fabricante.

Section 8. Exposure controls and personal protection

Consultar ficha técnica del fabricante.