3M™ PPS™ 800 ML, 600 ML AND 400 ML CAP DISPENSER.

3M PPS 800 ml, 600 ml and 400 ml Cap Dispenser – Wall-mounted lid organiser for PPS cups

The 3M PPS 800 ml, 600 ml and 400 ml Cap Dispenser is a wall-mounted storage and dispensing unit designed for organising PPS paint preparation system lids for multiple cup sizes. It keeps standard PPS caps for 800 ml, 600 ml and 400 ml cups clean, protected and immediately accessible in body shops and industrial painting areas. This description is based on general 3M PPS dispenser information and may contain unverified details; for exact technical data, please check the official 3M datasheet.

Main features

• Specific for 3M PPS lids – Designed to store and dispense original 3M PPS caps for 800 ml, 600 ml and 400 ml cups, helping to maintain order around the paint preparation area.
• Wall-mounted dispenser – Compact unit typically fixed to a wall or vertical surface so lids are always within reach and off contaminated work surfaces (mounting hardware may vary by kit and is not verified).
• Capacity for multiple sizes – One dispenser solution to organise lids for three of the most commonly used PPS cup volumes (800 ml, 600 ml and 400 ml), reducing search time and mix-ups between sizes.
• Helps protect lids from dust and overspray – By storing the caps inside a dedicated dispenser, they are less exposed to paint mist, dust and workshop contamination, supporting cleaner paint preparation (protection level not officially specified).
• Supports efficient workflow – Technicians can quickly pull the next lid from the dispenser without opening boxes or drawers, improving speed and ergonomics during mixing and refilling steps.
• Compatible with 3M PPS paint preparation systems – Intended for use in workshops already working with 3M PPS or PPS Series 2.0 cups and lids; exact compatibility with Series 2.0 caps is not confirmed and should be verified before purchase.

Technical specifications

• Brand: 3M
• System: 3M PPS (paint preparation system) – original series; Series 2.0 compatibility not confirmed.
• Product type: Wall-mounted cap dispenser for PPS paint cup lids.
• Supported lid sizes: Lids corresponding to approx. 800 ml, 600 ml and 400 ml PPS cups (volumes based on typical PPS cup range; exact fit must be verified).
• Typical application environment: Automotive refinishing, transportation and general industrial paint shops (usage context inferred from the PPS system range).

Applications and use cases

• Automotive body shops – Ideal for collision repair and refinishing workshops that use multiple PPS cup sizes for basecoat, clearcoat and primer, helping keep lids organised next to the mixing bench.
• Industrial and transport painting – Useful in paint lines or preparation areas where several painters share PPS lids and need fast, clean access to them.
• Optimised paint preparation areas – Suitable for any professional paint mixing room where it is important to keep consumables off worktops and protected from overspray.
• Multi-bay operations – Can be installed near each spray booth or mixing station so every technician has quick access to lids matched to 400 ml, 600 ml and 800 ml cups.

FAQ

1. What is the 3M PPS 800 ml, 600 ml and 400 ml Cap Dispenser used for?

   It is used to store and dispense 3M PPS paint cup lids for 800 ml, 600 ml and 400 ml cup sizes, keeping them organised, clean and easy to access in professional paint preparation areas.

2. Is this dispenser compatible with PPS Series 2.0 lids?

   Compatibility with PPS Series 2.0 lids is not confirmed in the available information. Before purchase, please verify with the official 3M product documentation or your distributor whether this dispenser is intended for original PPS, PPS Series 2.0, or both.

3. How is the dispenser installed?

   The unit is generally designed for wall mounting near the mixing bench or spray booth. Exact mounting hardware, fixing points and installation instructions are not specified here and should be checked in the 3M instructions supplied with the product.

4. Does the dispenser also hold PPS liners or only lids?

   This product name indicates a cap (lid) dispenser only. Some PPS accessories can store both liners and lids, but this specific model is described as a dispenser for caps; additional storage capability is not verified.

5. Can I use it with non-3M cups or lids?

   The dispenser is designed around the dimensions of 3M PPS lids. Use with other brands is not guaranteed and may not fit correctly.

6. In which environments is it recommended?

   It is intended for professional use in automotive refinishing and industrial paint shops where PPS cups are already in use and there is a need to organise lids by size.

7. Does it protect lids completely from dust and overspray?

   It helps to reduce exposure by keeping lids inside a dispenser instead of on open shelves, but the exact level of protection is not specified and cannot be guaranteed without the official technical data.

8. Is this product suitable for hobby or home use?

   While it could be used in a well-equipped home workshop that uses PPS cups, 3M PPS accessories are primarily designed and packaged for trained professional users in industrial and automotive environments.

Section 14 – Transport information

The 3M PPS 800 ml, 600 ml and 400 ml Cap Dispenser is an accessory for paint preparation and, based on the product type, is not expected to be classified as a dangerous good for transport. However, no official UN number, hazard class or packing group is specified in the available information. For confirmed transport classification and any special transport conditions, please refer to the official 3M safety documentation and product datasheet.

Section 8 – Individual protection measures

This product is a dispenser for PPS lids and does not itself generate hazardous emissions. Nevertheless, it is intended to be installed in paint preparation or spray areas where liquid coatings, solvents and hardeners are handled. In such environments, appropriate personal protective equipment (PPE) should be selected according to the coatings and chemicals in use, not the dispenser. As general guidance only (not product-specific, not exhaustive and not a replacement for the official safety data sheets):

• Eye and face protection: Use approved safety goggles or face shield when mixing, pouring or spraying paints and solvents in the vicinity of the dispenser.
• Skin protection: Wear suitable chemical-resistant gloves and protective clothing to avoid contact with coatings and cleaning agents stored or handled near the dispenser.
• Respiratory protection: In paint mixing rooms and spray booths, use appropriate respiratory protection (for example, organic vapour filters or supplied-air systems) as required by the coatings and local regulations.
• Hygiene measures: Wash hands and exposed skin after handling paints or solvents and before breaks; avoid eating, drinking or smoking in the paint preparation area.

For precise PPE requirements, always consult the safety data sheets of the specific coatings and chemicals used together with the PPS system, as well as any official 3M safety recommendations.

*Contenido generado por IA