PPS SYSTEM ADAPTERS

What it is and why choose it

The 3M PPS System Adapters are specifically designed components that allow operators to use the 3M PPS paint preparation system with practically any model of spray gun. Integrated into the 3M PPS closed cup-and-lid system, these adapters enable efficient application of a wide variety of waterborne or solvent-based coatings, eliminating the need for separate filters and traditional mixing cups.

Main features

• Specially designed adapters for the 3M PPS paint preparation system.
• Allow the use of the PPS system with practically any model of spray gun.
• Compatible with PPS disposable cup and lid system for coating application.
• Support the use of both water-based and solvent-based coatings.
• Form part of a closed paint system that removes the need for independent filters and mixing cups.
• Designed exclusively for professional industrial use.

Technical specifications

• System components materials:
  • Disposable cup: LDPE (low-density polyethylene).
  • Lid: PP (polypropylene).
  • Filter: Nylon 6.
• Detailed technical data for the adapters: Consultar ficha técnica del fabricante.

Applications and use cases

• Use in automotive repair and refinishing within the 3M PPS paint preparation system.
• Application of a wide range of coatings, both waterborne and solvent-based, when used with PPS cups, lids and filters.
• Professional spray-painting environments where a closed system is required and separate filters and mixing cups are not desired.
• Industrial settings where compatibility with many different spray gun models is needed.

FAQ – 3M PPS System Adapters

1. What are 3M PPS System Adapters used for?

They are used to connect the 3M PPS disposable cup and lid system to practically any model of spray gun, allowing professional application of coatings.

2. With what type of coatings can they be used?

The 3M PPS system, together with its adapters, is designed for use with both waterborne and solvent-based coatings.

3. Are separate mixing cups and filters needed when using the adapters with the PPS system?

No. The PPS system is a closed paint system that eliminates the need for independent filters and mixing cups.

4. Are the PPS System Adapters suitable for any spray gun?

The specifically designed adapters allow operators to use the PPS system with practically any model of spray gun.

5. Are these adapters intended for professional or domestic use?

The 3M PPS paint preparation system, including its adapters, is designed exclusively for professional industrial use.

6. Can coatings be stored in the PPS system after use?

Coatings can be stored in the 3M PPS product, following the recommendations of the coating manufacturer. A new lid may be required for spraying if the coating has dried.

7. How should coatings stored in the PPS system be handled?

Always follow the safety data sheet (SDS) of the paint or solvent and comply with local regulations and authorities for safe use and waste disposal.

8. How is excess paint returned to the cup after spraying?

Disconnect the air line, invert the spray gun and pull the trigger so that excess paint drains back into the disposable cup before disconnecting the gun.

9. Can coatings be protected when the system is not in use?

Yes. The 3M PPS closure cap can be used to seal and protect coatings when not in use, in accordance with local regulations or authorities.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Personal protective equipment (PPE) helps reduce exposure to certain workplace hazards. The employer is responsible for selecting the most suitable PPE for each task, based on a complete risk assessment. Always read the coating manufacturer’s documentation on performance, warnings and limitations before selecting and using it.

*Contenido generado por IA