HVLP NOZZLE REFILL KIT SPRAY 2.0

What it is and why choose it

The 3M Pack de conversión H/O de la Pistola de Alto Rendimiento (ref. 26837) converts the 3M High Performance Spray Gun into a pressurized gravity-feed spray gun for use with the 3M PPS Series 2.0 H/O pressurized cup system. This configuration is designed to provide superior application with high-viscosity and thick liquid coatings, helping technicians achieve factory-like finishes and a wide range of textures while taking full advantage of the 3M PPS Series 2.0 system.

Thanks to its replaceable 3M atomizing nozzles and the pressurized PPS H/O cup, the system allows efficient application of protective and textured coatings, increases productivity and can reduce coating consumption compared to conventional setups.

Main features

• Converts the 3M High Performance Spray Gun into a pressurized gravity-feed gun for use with a PPS H/O pressurized cup.
• Optimized for high-viscosity and thick liquid materials, such as protective and textured coatings.
• Compatible with a range of 3M gravity atomizing nozzle kits:
  • 26712 Gravity Nozzle Blue 1.2
  • 26713 Gravity Nozzle Green 1.3
  • 26714 Gravity Nozzle Orange 1.4
  • 26716 Gravity Nozzle Purple 1.6
  • 26718 Gravity Nozzle Clear 1.8
  • 26720 Gravity Nozzle Red 2.0
• Designed to work with the 3M PPS Series 2.0 H/O pressurized cup and disposable liners and lids.
• Helps achieve a wide variety of spray patterns and textures, including coarse, medium and fine textures with water-based coatings 3M PNs 08881/08882.
• Offers performance comparable to a new pressurized spray gun at a more accessible cost.
• Reduces the time required for gun cleaning when used with PPS disposable components.
• Contributes to improved productivity and profitability in professional body repair and coating operations.

Technical specifications

• Product reference: 3M 26837 Pack de conversión H/O de la Pistola de Alto Rendimiento.
• Compatible gun systems:
  • 26778 3M Sistema de Gravedad de la Pistola de Alto Rendimiento.
  • 26832 3M Pistola de Alto Rendimiento.
  • 26878 3M Sistema Industrial de la Pistola de Alto Rendimiento.
• Control components material:
  • Control knobs base: 6061 aluminum coating, type III black anodized.
• Recommended air supply capability for the gun: approximately 13 CFM or more (dynamic pressure adjustment with trigger pulled).
• H/O regulator: fully open at 1 complete turn from closed position (can be fully removed for cleaning).
• Adjustment references for 3M water-based textured coatings (3M PNs 08881/08882) using gravity nozzle 2.0 (26720):
  • Coarse texture: fan 1/2–1 turns; fluid 3 1/2 turns (fully open); H/O regulator 1 turn (fully open); inlet pressure 3–5 psi (0.20–0.35 bar).
  • Medium texture: fan 1 turn; fluid 2 turns; H/O regulator 1 turn (fully open); inlet pressure 10 psi (0.70 bar).
  • Fine texture: fan 1 turn; fluid 1 1/4 turns; H/O regulator 1 turn (fully open); inlet pressure 20 psi (1.38 bar).
• Disposable cup and lid compatibility (PPS Series 2.0 H/O pressurized cup system):
  • Rigid H/O cup large/standard: 26124.
  • Rigid H/O cup medium/mini: 26121.
  • Flexible liners and associated filters (selected references): 26024, 26000, 26112, 26114, 26325, 26301, 26312, 26314.
  • PPS 2.0 lids and related items (selected references): 26740, 26024, 26026, 26000, 26312, 26112, 26752, 26114, 20730, 26710.
  • PPS safety ring cover assembly: included with 26124 and 26121.
  • PPS Series 2.0 cap: included in PPS 2.0 kits.

Applications and use cases

The 3M High Performance Spray Gun H/O Conversion Pack is intended exclusively for professional industrial use. It is designed primarily for automotive repair and similar industrial coating operations where high-viscosity and textured materials are applied.

Typical applications

• Application of thick, high-viscosity liquid materials requiring additional pressure assistance in a gravity-feed system.
• Use with 3M water-based textured coatings (3M PNs 08881/08882) to produce coarse, medium or fine textures.
• Achieving and matching factory-like appearance of protective and textured coatings.
• Operations that benefit from reduced cleaning time and disposable PPS 2.0 cup and lid systems.

Basic installation and use

• Remove the two upper set screws on either side of the 3M High Performance Spray Gun body.
• Remove the fan control regulator assembly.
• Install the H/O Conversion Pack in its place and reinstall the two set screws.
• Close air valve, fluid control regulator and fan regulator fully to the right before adjusting to the desired settings.
• Adjust air pressure with the trigger pulled to obtain a dynamic reading.

FAQ

What does the 3M H/O Conversion Pack do?

It converts the 3M High Performance Spray Gun into a pressurized gravity-feed spray gun that can be used with the 3M PPS Series 2.0 H/O pressurized cup system, improving the application of high-viscosity coatings.

Which spray guns are compatible with this conversion pack?

It is designed for use with the 3M High Performance Spray Gun and related systems, including references 26778, 26832 and 26878.

Can I use different atomizing nozzle sizes?

Yes. It is compatible with 3M gravity atomizing nozzle kits from 1.2 to 2.0, including blue 1.2, green 1.3, orange 1.4, purple 1.6, clear 1.8 and red 2.0 nozzles.

Is it suitable for very thick protective coatings?

Yes. The H/O pressurized cup system is specifically designed for thick, high-viscosity liquid materials, where added pressure in a gravity system is beneficial.

What type of cup does it require?

It is used with the 3M PPS Series 2.0 H/O pressurized rigid cup, flexible liners and PPS lids, in large/standard or medium/mini sizes, depending on the job.

Does the H/O regulator need to be fully opened for use?

The H/O regulator is fully open at 1 complete turn from the closed position. It can be unscrewed completely for cleaning if necessary.

How should I adjust air pressure?

Adjust air pressure with the gun trigger pulled to obtain a dynamic pressure reading. A compressor capable of supplying approximately 13 CFM or more is recommended.

Is this product intended for consumer use?

No. The 3M High Performance Spray Gun system is designed exclusively for professional industrial use.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Personal protection measures

Before using this product, read and understand the product label and manual for health and safety information. Consult the safety data sheets of all chemical materials used with this product and follow all local regulations for the use and disposal of items and products associated with it. Consultar ficha técnica del fabricante.

*Contenido generado por IA