HVLP NOZZLE REFILL KIT SPRAY 1.8

What it is and why choose it

The 3M HVLP Nozzle Refill Kit Spray 1.8 is part of the 3M high-performance spray system designed for professional automotive repair. This system uses replaceable atomizing nozzles that work together with the 3M High Performance Spray Gun, the H/O Conversion Pack and the 3M PPS Series 2.0 pressurized gravity cup. The 1.8 mm spray size is intended for applying high-viscosity and textured coatings with consistent, factory-like finishes while helping to reduce coating consumption and cleaning time.

Main features

• Compatible with the 3M High Performance Spray Gun and gravity-feed atomizing nozzles.
• Designed for use with the 3M H/O (high output) Conversion Pack for pressurized gravity spraying.
• Supports application of high-viscosity, thick and textured materials when used with the 3M PPS Series 2.0 H/O pressurized cup.
• Helps achieve a wide range of spray patterns and textures depending on the selected nozzle and gun settings.
• Part of a system that increases productivity and profitability by reducing gun cleaning time and coating waste.
• Works with disposable 3M PPS Series 2.0 lids and liners to take advantage of closed-cup mixing and spraying.

Technical specifications

• Nozzle type: Gravity atomizing nozzle.
• Nominal nozzle size: 1.8 mm.
• Compatible spray gun: 3M High Performance Spray Gun (with appropriate system setup).
• Compatible cup system: 3M PPS Series 2.0 H/O pressurized cup and disposable lids/liners.
• Recommended air supply capacity for the spray gun: approximately 13 CFM or more.
• Material of control components in the system: aluminium 6061 base with black Type III anodized coating (for the gun controls associated with the H/O Conversion Pack).
• Other performance, material and certification data: Consultar ficha técnica del fabricante.

Applications and use cases

When used as part of the 3M High Performance Spray Gun system, the 1.8 mm HVLP nozzle refill is suitable for:

• Applying thick, high-viscosity coatings where additional pressure support from the H/O cup is beneficial.
• Creating a wide variety of coating textures, from coarse to fine, by combining nozzle choice with gun pressure and fluid/air controls.
• Automotive repair and refinishing tasks that require matching or reproducing factory-like textures.
• Use with waterborne textured coatings such as 3M water-based coatings (when the gun and cup are set up according to the recommended parameters).

FAQ

1. 1. With which spray gun is this 1.8 nozzle designed to be used?

   It is designed for use with the 3M High Performance Spray Gun as part of the 3M gravity-feed atomizing nozzle system.

2. 2. Can it be used with the 3M H/O Conversion Pack?

   Yes. The nozzle is used in combination with the 3M H/O Conversion Pack to create a pressurized gravity system for high-viscosity materials.

3. 3. What cup system should I use?

   Use the 3M PPS Series 2.0 H/O pressurized cup with the corresponding PPS 2.0 disposable lids and liners.

4. 4. What air pressure and gun settings are recommended?

   Air pressure, fan and fluid settings depend on the specific coating and desired texture. The technical data sheet provides starting points, but each technician can adjust the gun to their preferred pattern.

5. 5. Is this system suitable for high-viscosity materials?

   Yes. The H/O pressurized cup and gravity atomizing nozzles are specifically designed for thick, high-viscosity materials where additional pressure support is needed.

6. 6. Does this system help reduce cleaning time?

   Yes. Using replaceable atomizing nozzles together with PPS Series 2.0 disposable lids and liners reduces the time needed to clean the spray gun.

7. 7. Is the 3M High Performance Spray Gun system for professional use?

   Yes. The 3M High Performance Spray Gun is designed exclusively for professional industrial use.

8. 8. How should the equipment be stored?

   Ensure that the equipment is cleaned before storage and store the gun with a nozzle connected to protect the needle.

9. 9. Where can I find detailed safety and chemical compatibility information?

   Before using the product, read and understand the product label, manual and all safety data sheets for the chemicals used with it.

10. 10. What should I do if I need more detailed technical data?

    Consultar ficha técnica del fabricante.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Before using this product, read and understand the product label and manual for health and safety information, and consult all safety data sheets for the chemical materials used with this product. Follow all local regulations for the use and disposal of items and products associated with the use of this system. For detailed personal protective equipment requirements: Consultar ficha técnica del fabricante.