3M™ PPS™ 2.0 SERIES MIXING CUP, STANDARD

What it is and why choose it

The 3M™ PPS™ 2.0 Series Mixing Cup, Standard, is part of the 3M™ PPS™ Series 2.0 paint preparation system for professional, industrial use in automotive repair. It is a rigid cup designed to hold the disposable PPS™ 2.0 liners and lids, creating a closed paint system for the application of a wide variety of waterborne or solvent-based coatings. By using this cup as part of the PPS™ 2.0 system, separate mixing cups and strainers are no longer required.

Main features

• Standard-size rigid cup with 650 ml capacity for the 3M™ PPS™ Series 2.0 system.
• Designed for use with disposable PPS™ 2.0 liners and lids with integrated filters.
• Supports the application of a broad range of waterborne and solvent-based coatings.
• Closed paint system concept eliminates the need for independent filters and mixing cups.
• Compatible with most spray guns through specially designed PPS™ adapters.
• Developed for professional, industrial use in automotive repair environments.

Technical specifications

• System: 3M™ PPS™ Paint Preparation System Series 2.0
• Product type: Rigid mixing cup (cazoleta)
• Size: Standard
• Nominal capacity: 650 ml
• Compatible components: 3M™ PPS™ Series 2.0 disposable liners, lids and closure plugs
• Construction materials of the disposable components used with this cup:
  • Disposable liner: LDPE (low-density polyethylene)
  • Lid: PP (polypropylene)
  • Filter mesh (in lid): Nylon 6

Applications and use cases

This cup is intended to be used as part of the 3M™ PPS™ Series 2.0 system within the automotive repair sector. Typical applications include:

• Preparation and application of waterborne coatings.
• Preparation and application of solvent-based coatings.
• Use in combination with appropriate PPS™ Series 2.0 disposable liners, lids and adapters on compatible spray guns.

The system is designed exclusively for professional, industrial use.

Basic use instructions (as part of the PPS™ 2.0 system)

1. Insert a disposable PPS™ 2.0 liner into the standard 650 ml rigid cup.
2. Mix the paint thoroughly inside the liner while it is in the cup.
3. Place the PPS™ 2.0 lid on top of the cup. Align the black quarter-turn locking system with the access window of the cup, press the lid down, then twist to lock.
4. Select the correct adapter for the spray gun. Push down and twist until the adapter is securely attached to the lid.
5. After spraying, disconnect the air line, invert the spray gun and pull the trigger so any excess paint returns to the liner in the cup.
6. Tap the assembled liner and lid gently on a surface to help break the surface tension and allow more liquid to drain back into the liner.
7. To remove the liner and lid from the rigid cup, unlock the lid with a partial twist. Insert fingers through the opening in the base of the rigid cup and push the liner upwards while finishing the twist to remove the liner and lid together.
8. Use the PPS™ 2.0 closure plug to seal and protect any coating in the liner when not in use, according to local regulations and requirements.

FAQ

What capacity does the standard 3M™ PPS™ 2.0 mixing cup have?

The standard cup used in the 3M™ PPS™ 2.0 system has a nominal capacity of 650 ml.

Is this cup suitable for both waterborne and solvent-based paints?

Yes. The 3M™ PPS™ 2.0 system, including this standard cup, is designed for use with a wide variety of waterborne and solvent-based coatings.

Do I still need separate mixing cups and strainers?

No. When used correctly with PPS™ 2.0 disposable liners and lids, it creates a closed paint system that removes the need for independent mixing cups and filters.

Can I use this cup with any spray gun?

The system can be used with practically any spray gun model by using appropriately designed PPS™ adapters. Consultar ficha técnica del fabricante.

What materials are the disposable components made from?

The PPS™ 2.0 disposable liner is made from LDPE, the lid from PP, and the integrated filter mesh from Nylon 6.

Is the 3M™ PPS™ 2.0 system intended for DIY use?

No. The 3M™ PPS™ paint preparation system is designed exclusively for professional industrial use.

How should I store coatings when using this system?

For storage of paints and coatings, refer to the safety data sheet of the paint or solvent for information on shelf life and storage conditions. When storing with the PPS™ 2.0 lid, use the wide base of the PPS™ 2.0 closure plug to hold the cup upside down so the filter mesh remains wet.

How do I ensure safe use and waste disposal?

Always refer to the safety data sheets (SDS) of the paint or solvent and follow local regulations or authority guidance for safe system use and proper waste disposal.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Personal protective equipment (PPE) helps reduce exposure to certain workplace hazards. The employer is ultimately responsible for selecting adequate PPE for each task, based on the results of a complete risk assessment. Always read the coating manufacturer’s performance information, warnings and limitations before selecting and using coatings in combination with the 3M™ PPS™ 2.0 system.

Contenido generado por IA