PPS™ RING CUP 3M™

What it is and why choose it

The 3M™ PPS™ Ring Cup is part of the 3M™ PPS™ Series 2.0 Paint Preparation System, a disposable cup and lid solution designed for professional industrial use in automotive repair. When combined with 3M™ PPS™ disposable liners, lids and dedicated adapters, it allows the application of a wide variety of waterborne or solvent-based coatings in a closed paint system, eliminating the need for separate mixing cups and filters.

This system is designed to be used with almost any spray gun model through specifically engineered adapters, helping streamline paint preparation and application processes in professional body shops.

Main features

• Component of the 3M™ PPS™ Series 2.0 closed paint preparation system.
• Compatible with a wide variety of waterborne and solvent-based coatings.
• Enables use of disposable cup and lid for each job, reducing cleaning time.
• Eliminates the need for separate mixing cups and filters when used as part of the PPS™ system.
• Designed for use with almost any spray gun model by means of dedicated 3M™ PPS™ adapters.
• Intended exclusively for professional industrial environments.

Technical specifications

The following materials apply to the components of the 3M™ PPS™ Series 2.0 system:

• Disposable cup: LDPE (low density polyethylene).
• Lid: PP (polypropylene).
• Filter mesh: Nylon 6.

For any additional technical data: Consultar ficha técnica del fabricante.

Applications and use cases

The 3M™ PPS™ Ring Cup is intended for use in automotive repair shops and other professional industrial environments where spray-applied coatings are used. Typical applications include:

• Preparation and application of waterborne basecoats.
• Preparation and application of solvent-based coatings.
• Use with a wide range of spray guns through suitable 3M™ PPS™ adapters.
• Jobs requiring efficient paint mixing, application and temporary storage of coatings inside the PPS™ cup and lid system.

Basic instructions for use within the PPS™ system

1. Insert a disposable cup into the rigid 3M™ PPS™ cup.
2. Mix the paint thoroughly inside the disposable cup and the 3M™ PPS™ Series 2.0 cup.
3. Place the lid on top of the cup, align the black quarter-turn locking system with the access window and push down, then twist to close and lock.
4. Select the appropriate adapter for your spray gun, push down and twist until it is firmly connected to the lid.
5. After spraying, disconnect the air line, invert the gun and pull the trigger to return excess paint to the cup.
6. Tap the disposable cup and lid lightly on a surface to help break the liquid’s surface tension and allow it to flow back into the cup.
7. To remove the lid and disposable cup from the rigid cup, twist the lid just enough to unlock it, insert your fingers through the opening in the bottom of the rigid cup and push the disposable cup upwards while lifting the lid and cup together.
8. Use the 3M™ PPS™ Series 2.0 sealing cap to close and protect coatings when not in use, according to local regulations and authorities.

FAQ

1. What types of coatings can be used with the 3M™ PPS™ Ring Cup?

The PPS™ system is designed for use with a wide diversity of waterborne and solvent-based coatings.

2. Is the system suitable for any spray gun?

The system can be used with practically any spray gun model when the correct 3M™ PPS™ adapter is selected and fitted.

3. Do I still need separate mixing cups and filters?

No. When used correctly as a closed paint system with PPS™ disposable cups, lids and filters, it eliminates the need for independent mixing cups and filters.

4. Can coatings be stored in the PPS™ cups?

Yes. Coatings can be stored using the 3M™ PPS™ Series 2.0 sealing caps. The wide base of the caps allows the cups to be placed upside down so that the filter mesh remains wet.

5. How should I remove the disposable cup after use?

Unlock the lid with a slight twist, insert your fingers into the opening in the bottom of the rigid cup and push the disposable cup upwards while lifting off the lid and cup together.

6. Is the product intended for hobby or consumer use?

No. The 3M™ PPS™ paint preparation system has been designed exclusively for professional industrial use.

7. How should I dispose of used cups and coatings?

Follow the safety data sheets of the paint or solvent and local regulations or authorities to ensure safe use of the system and proper waste disposal.

8. Which materials are used in the PPS™ Series 2.0 system components?

The disposable cup is made of LDPE, the lid is made of PP and the filter mesh is made of Nylon 6.

9. How should I store the system and coatings?

Use the red 3M™ PPS™ dispensers, which work with all PPS™ Series 2.0 cups and lids. For storage of paints and coatings, always refer to the safety data sheets of the paint or solvent for information on shelf life and storage conditions.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Personal protective equipment (PPE) helps reduce exposure to certain workplace hazards. The employer is ultimately responsible for selecting the most suitable PPE for each task based on a complete risk assessment. Always read the manufacturer’s information on performance, warnings and limitations of the coating before selecting and using it.

For specific PPE recommendations: Consultar ficha técnica del fabricante.

*Contenido generado por IA