1/2" 2 STAGE AIR CLEANER FLITRO

What is the Iwata 1/2" 2 Stage Air Cleaner Filter and why choose it

The Iwata 1/2" 2 Stage Air Cleaner Filter is a compressed air purifying unit designed to remove moisture, particles and oil aerosols from the air supply used with spray guns and pneumatic tools. With a 2-stage filtration system and 1/2 inch connections, it is aimed at professional body shops and industrial users who need clean, dry air to achieve consistent paint finishes and protect equipment. Some details are inferred from typical Iwata double-stage air cleaning systems and may not be fully verified for this exact reference; for exact parameters, please refer to the official technical datasheet of the manufacturer.

Main features

• Two-stage air cleaning system designed for compressed air lines.
• Nominal 1/2 inch air inlet and outlet for easy integration into standard workshop installations (information based on typical Iwata systems, not fully verified for this specific code).
• First filtration stage usually dedicated to removal of water and coarse particles from the compressed air.
• Second filtration stage typically focuses on fine particles and oil aerosols to deliver cleaner air to tools and spray guns.
• Recommended for use in automotive refinishing and industrial painting environments where air quality is critical.
• Compatible with Iwata spray equipment and most standard compressed air networks when correctly installed.
• Wall-mounted configuration is typical for this type of unit, keeping the air line organized and accessible (not explicitly verified for this exact model).

Technical specifications

The following points are general characteristics of Iwata 1/2 inch 2-stage air cleaning systems and may not be fully verified for the specific product "1/2" 2 STAGE AIR CLEANER FLITRO". They should be checked against the official manufacturer datasheet before critical use.

• Connection size: Inlet and outlet nominal 1/2 inch (F), typical for distribution lines.
• Number of stages: 2 (double-stage filtration).
• Filtration concept: pre-filter for moisture and particles, followed by coalescing or fine filter for oil and fine contaminants (generic description, not model-specific verified).
• Intended medium: compressed air for spray guns and pneumatic tools.
• Installation: generally installed permanently on the wall or fixed structure in the air line upstream of spray guns.

Applications and use cases

• Automotive refinishing: supplying clean air to spray guns in car repair and body shops to reduce paint defects caused by moisture or oil in the air line.
• Industrial painting: use in industrial paint booths, metal finishing, wood coating and similar applications where stable air quality is required.
• Compressed air tool protection: helping extend the life of pneumatic tools by reducing water and oil contamination in the supply air.
• Preparation for high-quality finishes: supporting processes that require uniform paint atomization and surface appearance by improving air quality.

FAQ

1. Is this filter suitable for all Iwata spray guns?

   It is generally suitable for supplying clean air to most Iwata spray guns as long as the air pressure and flow requirements of the gun are met. However, compatibility with a specific gun model should be checked in the respective technical documentation.

2. Does the filter include a pressure regulator and gauge?

   Some Iwata 2-stage air cleaning units integrate a regulator and pressure gauge, but this is not confirmed for the exact product "1/2" 2 STAGE AIR CLEANER FLITRO". Please verify this point in the official datasheet or product label before purchase or installation.

3. What type of contaminants does the 2-stage system remove?

   In general, the first stage is designed to remove moisture and larger particles, while the second stage targets finer particles and oil aerosols. The exact filtration ratings and efficiency levels are not verified for this specific item and should be confirmed with the manufacturer.

4. Can it be installed directly after the compressor?

   Double-stage filters are often installed downstream of the compressor and after any main tank or primary dryer, in a position that allows easy access for maintenance. The exact recommended installation layout should be checked in the official instructions for the specific model.

5. Is the connection really 1/2 inch?

   The product name indicates 1/2 inch, which is typical for Iwata double-stage air filters used in body shops. However, the precise thread type and configuration (for example, female or male, BSP or NPT) are not verified here and must be confirmed before connecting to an existing air system.

6. Does it require regular maintenance?

   Yes, regular draining of collected water and periodic replacement of filter cartridges is standard for this type of unit. Maintenance intervals and specific procedures depend on the exact filter model and operating conditions and should follow the manufacturer instructions.

7. Can it be used with non-painting pneumatic tools?

   In many cases, clean and dry air from a 2-stage filter can benefit other pneumatic tools, helping to protect internal components. Nevertheless, always ensure the pressure and flow from the filter match the tool requirements.

8. Is this product compatible with existing air dryers or additional filters?

   It can typically be combined with other filtration or drying equipment in a multi-stage air treatment system. The sequence and spacing between devices should follow best practice and the recommendations of the manufacturer or system installer.

Section 14 – Transport information

No specific transport data (such as UN number, class, packing group or special provisions) is available for this product based on the information consulted. For precise classification according to ADR, IMDG or IATA, the official safety documentation from the manufacturer should be consulted, especially if the unit is shipped with oils, lubricants or other hazardous contents.

Section 8 – Individual protection measures

As this is an air filtration device integrated into compressed air systems, its handling is generally mechanical rather than chemical. However, during installation, maintenance and operation it is advisable to adopt basic individual protective measures:

• Wear safety glasses or protective goggles when working on pressurized air lines or when replacing filter elements, to avoid eye injury from sudden air releases or particles.
• Use suitable work gloves to protect hands from sharp edges, hot surfaces or contaminants that may accumulate on the filter body or cartridges.
• Ensure the air line is depressurized before any maintenance operation to prevent uncontrolled air discharge.
• When used in painting environments, follow the personal protective equipment guidelines related to paints and solvents (respiratory protection, protective clothing, etc.) as defined by product safety data sheets.

*Contenido generado por IA