What is Epifanes SATIN FINISH and why choose it?
Epifanes SATIN FINISH is a one-component urethane satin yacht paint designed for interior and exterior use. It offers a satin gloss appearance, very good flow characteristics and is easy to apply across a wide range of temperatures. The high pigment concentration provides strong hiding power and good colour retention, while the cured coating offers outstanding resistance to alcohol and common household chemicals.
Used together with the appropriate Epifanes primers and, for exterior systems, a high gloss topcoat, SATIN FINISH delivers a durable, easy-to-maintain satin surface on wood, steel, GRP and aluminium.
Main features
- One-component oxidative drying urethane finish.
- Satin gloss appearance for a low-sheen, refined look.
- Suitable for interior and exterior applications on wood, steel, GRP and aluminium in combination with the recommended primers.
- High covering power due to high pigment concentration.
- Good colour retention and easy maintenance over time.
- Outstanding protection against alcohol and household chemicals.
- Very easy application by brush, roller or spray, with excellent flow.
- Re-coatable with various Epifanes topcoats such as Mono-urethane Yacht Paint, Yacht Enamel, Non-skid deck coating, Flat Black, Nautiforte Yacht Paint and Waterline Paint.
Technical characteristics and specifications
Product information
- Type: Oxidative drying.
- Base: Urethane.
- Gloss level: Satin.
- Colour: White; mixed colours available on request.
- Density at 20°C: 1.10 – 1.35 g/cm³ depending on colour (SDS lists 1.1 g/cm³).
- Viscosity: 40 seconds ISO-cup 6 mm (kinematic viscosity at 20°C, ISO 6 mm: 40 s).
- Solids by volume: 60 ± 2%.
- Solids content (SDS): 70.0%.
- VOC level: 330 g/l (about 30% by weight; VOC content 330.2 g/l / 2.76 lb/gal).
- Solvent content (organic solvents): 30.0%.
- Flash point: 38°C.
- Recommended wet film thickness: 60 – 70 µm.
- Recommended dry film thickness: 35 – 45 µm.
- Theoretical coverage: 15 m² per litre at 40 µm dry film thickness.
- Practical coverage: Dependent on substrate, application technique, object shape and application conditions.
- Packing: 750 ml (white); mixed colours 750 ml and 2000 ml.
- Shelf life: Approx. 3 years in unopened containers stored dry at 5 – 30°C.
Drying and overcoating times (35 µm dry film, 65% RH)
- 10°C: Dust dry 4 h; sandable/recoatable 48 h.
- 15°C: Dust dry 3 h; sandable/recoatable 36 h.
- 20°C: Dust dry 2 h; sandable/recoatable 24 h.
- 25°C: Dust dry 1.5 h; sandable/recoatable 18 h.
Higher wet film thicknesses and/or poor ventilation will increase drying times, especially on horizontal surfaces. Wet-on-wet application is not allowed.
Application conditions
- Application temperature (air and substrate): minimum 8°C, maximum 30°C.
- Relative humidity: minimum 50%, maximum 85%.
- Maximum temperature difference (paint vs. surface): 3°C.
- Avoid direct sunlight and strong wind to prevent rapid solvent loss and impaired flow.
Thinning and application methods
- Brush/Roller: Use Epifanes Brushthinner for Paint & Varnish or a good quality white spirit.
- Spray: Use Epifanes Spraythinner for Paint & Varnish or denaturated alcohol.
- General thinning: Thinning ratio depends on product temperature and working conditions; avoid over-thinning. For detailed ratios: Consultar ficha técnica del fabricante.
Spray guidelines
- Thinning volume: 10 – 15%.
- Nozzle size: 1.3 – 1.5 mm.
- Pressure: 2 – 3 bar.
- Viscosity (DIN 4 mm): 20 – 22 seconds.
Substrates and recommended primers
- Bare GRP: Clean and degrease with Epifanes Fibreglass Prep Cleaner, sand P220–240 and apply 1 coat of primer.
- Bare wood: Clean, dry, degrease with Epifanes Spraythinner for Paint & Varnish, sand P220–240 and apply 1–2 coats of primer.
- Bare steel: Clean, dry, corrosion-free, degrease with Epifanes Cleaning Solution, sand P60 and apply 3 primer coats.
- Existing paintwork: Well-adhering, dry and degreased with Epifanes Spraythinner for Paint & Varnish, sand P220–240.
Appropriate primers:
- All substrates: Epifanes Multi Marine Primer or Epifanes Undercoat.
- Wood: Epifanes Woodprimer.
- New aluminium: Epifanes Washprimer AQ.
After curing, sand each primer coat with P180–220 before applying finishing coats.
System build-up
- General after priming: Finish with 3 full-bodied coats.
- Interior systems: Apply 2–3 coats of SATIN FINISH.
- Exterior systems: Apply 1–2 coats of Epifanes Mono-urethane followed by 1 coat of SATIN FINISH.
- Lightly sand between coats with P400 or Scotch Brite. Always sand fresh coats by hand.
Applications and use cases
- Interior woodwork on yachts and boats: Satin finishing coats over Epifanes wood or multi-purpose primers.
- Exterior yacht topsides and superstructures: Final satin coat over a high gloss Mono-urethane system for improved long-term UV protection.
- Steel and aluminium marine surfaces: In combination with the specified multi-coat primer systems.
- GRP components: Primed GRP surfaces where a durable satin appearance and good chemical resistance are required.
- Maintenance of existing paintwork: Over well-bonding, sanded and suitably primed Epifanes or compatible systems.
FAQ – Epifanes SATIN FINISH
-
Is SATIN FINISH suitable for both interior and exterior use?
Yes. It is designed for interior and exterior systems on wood, steel, GRP and aluminium when used with the appropriate primers. For exterior use it should be applied over a high gloss topcoat such as Epifanes Mono-urethane for improved UV protection.
-
What is the recommended system build-up for exterior applications?
Prime the substrate as specified, then apply 1–2 coats of Mono-urethane and finish with 1 coat of SATIN FINISH. Sand lightly between coats with P400 or Scotch Brite.
-
How much area does one litre cover?
The theoretical coverage is about 15 m² per litre at 40 µm dry film thickness. Practical coverage depends on substrate condition, application technique and environmental conditions.
-
How long should I wait before sanding or recoating?
At 20°C and 65% relative humidity, the coating is dust dry after roughly 2 hours and sandable/recoatable after about 24 hours. At lower temperatures drying and overcoating times increase.
-
Which thinners should I use?
For brush and roller application use Epifanes Brushthinner for Paint & Varnish or good quality white spirit. For spray application use Epifanes Spraythinner for Paint & Varnish or denaturated alcohol. Thinning levels depend on temperature and conditions; avoid over-thinning.
-
Can I apply this paint wet-on-wet?
No. Wet-on-wet application is not allowed. Each coat must be allowed to dry adequately and be sanded lightly before the next coat.
-
What safety or hazard classifications apply to SATIN FINISH?
The product is classified as a flammable liquid (Flam. Liq. 3, H226), may cause an allergic skin reaction (Skin Sens. 1, H317) and may cause drowsiness or dizziness (STOT SE 3, H336). Repeated exposure may cause skin dryness or cracking (EUH066).
-
How should I store the product?
Store only in the original, tightly closed container in a dry room at 5 – 30°C. Keep away from ignition sources and observe all national regulations regarding storage of flammable liquids.
-
On which substrates can I use SATIN FINISH?
It can be used on properly prepared and primed wood, steel, GRP and aluminium, as well as on existing, well-bonding paintwork that has been cleaned, degreased and sanded.
-
Is the product water-hazardous?
According to self-assessment it is classified as slightly hazardous for water (Water hazard class 1). Do not allow large quantities of undiluted product to reach groundwater, surface water or sewage systems.
Section 14 – Transport information
According to the safety data sheet, Epifanes SATIN FINISH is classified as follows for transport:
- UN number or ID number: UN1263.
- UN proper shipping name: PAINT.
- Transport hazard class: Class 3 (flammable liquids).
- Labels: 3.
- Packing group: III.
- Marine pollutant: No.
- Hazard identification number (Kemler code): 30.
- EMS number (IMDG): F-E, S-E.
- Stowage category (IMDG): A.
- ADR limited quantities (LQ): 5 L.
- ADR excepted quantities (EQ): Code E1 (max. 30 ml per inner packaging, 1000 ml per outer packaging).
- Transport category (ADR): 3.
- Tunnel restriction code (ADR): D/E.
- Remarks ADR: Packaging < 450 L may be exempt as viscous substances according to 2.2.3.1.5; > 450 L: 3 F1, III.
- Remarks IMDG: > 450 L: 3, III.
- UN model regulation: UN 1263 PAINT, 3, III.
Section 8 – Individual protection measures
When handling or applying Epifanes SATIN FINISH, follow the personal protection guidance from the safety data sheet:
General hygiene measures
- Ensure good ventilation or exhaust at the workplace.
- Immediately remove soiled or contaminated clothing.
- Wash hands before breaks and after work.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- Prevent formation of aerosols; avoid breathing vapours, spray or mist.
Respiratory protection
- Use a suitable respiratory protective device when ventilation is insufficient.
- For short or low exposure, a breathing filter device for organic vapours and solvents is recommended.
- For intensive or prolonged exposure, use breathing apparatus independent of the surrounding air.
- A half-face mask for organic vapours and solvents according to EN140 type A1 or A2 is recommended.
Hand protection
- Wear protective gloves that are impermeable and resistant to the product.
- Selection of glove material should take into account penetration times, diffusion rates and degradation, and must be confirmed with the glove manufacturer.
- For up to 15 minutes of continuous contact, butyl rubber (BR) gloves are suitable.
- For splash protection, the following gloves are indicated:
- Chloroprene gloves, thickness > 0.7 mm, penetration time > 60 min (EN374).
- Nitrile rubber gloves, thickness > 0.3 mm, penetration time > 60 min (EN374).
Eye and face protection
- Wear tightly sealed safety goggles to protect against splashes.
Additional safety notes
- The product is a flammable liquid and vapour; protect against electrostatic charges and ignition sources.
- Repeated skin contact can cause dryness or cracking.
- Contains cobalt compounds that may cause allergic skin reactions; avoid skin contact.
- Dispose of contents and containers according to local, regional, national and international regulations.
*Contenido generado por IA
