D-100 THINNER

What is Epifanes D-100 Thinner and why choose it?

Epifanes D-100 Thinner is a clear, fluid solvent mixture based on solvent naphtha (petroleum), light aromatic (CAS 64742-95-6). It is designed as a thinner and cleaning solvent, classified under product category PC35 (washing and cleaning products, including solvent-based products) and PC0 (other). The product is indicated as a thinner for, among others, Epifanes Foul Away. Its formulation offers a characteristic solvent odour, high solvent power and controlled flammability, making it suitable for professional use where roller application or brushing (PROC10) is involved.

Main features

• Clear liquid solvent: Fluid, colourless appearance with characteristic odour.
• High solvent content: 100% organic solvents; VOC content 100% (876 g/l; 7.31 lb/gl).
• Application method: Intended for roller application or brushing processes and as a thinner for products such as Epifanes Foul Away.
• Controlled flammability: Classified as a flammable liquid (Flam. Liq. 3, H226) with a flash point of 45 °C.
• Specific hazard profile: May be fatal if swallowed and enters airways (Asp. Tox. 1, H304), may cause respiratory irritation and drowsiness or dizziness (STOT SE 3, H335-H336).
• Environmental classification: Toxic to aquatic life with long-lasting effects (Aquatic Chronic 2, H411); marine pollutant with special marking (fish and tree symbol).
• Single-component substance: Based on solvent naphtha (petroleum), light aromatic, with benzene content below 0.1% w/w (Note P).

Technical specifications

• Product name: Epifanes Thinner D-100
• Brand: Epifanes
• Chemical nature: Solvent mixture; mixture of organic solvents based on solvent naphtha (petroleum), light aromatic
• CAS number: 64742-95-6
• EC number: 265-199-0
• Index number: 649-356-00-4
• Registration number: 01-2119486773-24
• Physical state: Fluid
• Colour: Clear
• Odour: Characteristic
• pH: Not determined. Consultar ficha técnica del fabricante.
• Melting point/freezing point: Undetermined. Consultar ficha técnica del fabricante.
• Initial boiling point and boiling range: Undetermined. Consultar ficha técnica del fabricante.
• Flash point: 45 °C
• Flammability: Not applicable for solid/gas (liquid product).
• Auto-ignition temperature: Not determined. Consultar ficha técnica del fabricante.
• Decomposition temperature: Not determined. Consultar ficha técnica del fabricante.
• Explosive properties: Product is not explosive, but formation of explosive air/vapour mixtures is possible.
• Explosion limits: Lower and upper limits not determined. Consultar ficha técnica del fabricante.
• Vapour pressure: Not determined. Consultar ficha técnica del fabricante.
• Density (20 °C): 0.876 g/cm³
• Relative density: Not determined. Consultar ficha técnica del fabricante.
• Vapour density: Not determined. Consultar ficha técnica del fabricante.
• Evaporation rate: Not determined. Consultar ficha técnica del fabricante.
• Solubility in water: Not miscible or difficult to mix.
• Partition coefficient n-octanol/water: Not determined. Consultar ficha técnica del fabricante.
• Viscosity (dynamic and kinematic): Not determined. Consultar ficha técnica del fabricante.
• Organic solvents: 100%
• VOC content: 100% (876.0 g/l; 7.31 lb/gl)
• Stability: No decomposition if used according to specifications.
• Reactivity: Reacts with strong acids and oxidising agents.
• Hazardous decomposition products: Carbon monoxide, carbon dioxide, aldehydes.

Applications and use cases

• Thinner for Epifanes coatings: Indicated as a thinner for, among others, Epifanes Foul Away.
• Washing and cleaning solvent: Categorised as a washing and cleaning product, including solvent-based cleaning operations (PC35), particularly in environments where coatings are formulated or processed (ERC2).
• Roller and brush applications: Classified under process category PROC10, making it suitable for operations involving roller application or brushing of compatible coating systems.

FAQ – Epifanes D-100 Thinner

1. What is the main ingredient of Epifanes D-100 Thinner?

   The product is based on solvent naphtha (petroleum), light aromatic (CAS 64742-95-6).

2. What type of product category does it belong to?

   It is classified under PC35 (washing and cleaning products, including solvent-based products) and PC0 (other).

3. Can this thinner be used with Epifanes Foul Away?

   Yes, it is indicated as a thinner for, among others, Epifanes Foul Away.

4. Is Epifanes D-100 Thinner flammable?

   Yes. It is classified as a flammable liquid, Category 3 (Flam. Liq. 3, H226) with a flash point of 45 °C. It should be kept away from heat, hot surfaces, sparks and open flames.

5. What are the main health hazards?

   The product may be fatal if swallowed and enters airways (H304) and may cause respiratory irritation and drowsiness or dizziness (H335-H336). Repeated exposure may cause skin dryness or cracking (EUH066).

6. Is this product hazardous to the environment?

   Yes. It is toxic to aquatic life with long-lasting effects (H411), classified as hazardous for water (water hazard class 2) and designated as a marine pollutant.

7. How should Epifanes D-100 Thinner be stored?

   Store only in the original, tightly sealed container in a well-ventilated place, away from heat, direct sunlight, ignition sources and foodstuffs.

8. What personal protective equipment is recommended during use?

   Use suitable respiratory protection (filter AX for brief exposure), protective gloves made of nitrile rubber and tightly sealed safety goggles. Detailed guidance is provided in Section 8 of the safety data.

9. Can the product be disposed of with household waste?

   No. It must not be disposed together with household garbage and should not be allowed to reach the sewage system. Follow official regulations and waste codes for disposal.

10. Where can I find information about transport classification?

    Transport information, including UN number, hazard class and packing group, is detailed in Section 14 of the safety data.

Section 14 – Transport information

• UN number: UN1268
• UN proper shipping name (ADR): 1268 PETROLEUM DISTILLATES, N.O.S., ENVIRONMENTALLY HAZARDOUS
• UN proper shipping name (IMDG): PETROLEUM DISTILLATES, N.O.S., MARINE POLLUTANT
• UN proper shipping name (IATA): PETROLEUM DISTILLATES, N.O.S.
• Transport hazard class: Class 3 (flammable liquids) for ADR, IMDG and IATA
• Label: 3 (flammable liquid)
• Packing group: III
• Environmental hazards: Classified as marine pollutant (yes); special marking with the fish and tree symbol for ADR and IMDG.
• Special precautions for user: Warning: flammable liquids; danger code (Kemler) 30; EMS F-E, S-E; stowage category A.
• Transport in bulk according to Annex II of MARPOL and the IBC Code: Not applicable.
• ADR – Limited quantities (LQ): 5 L
• ADR – Excepted quantities (EQ): Code E1 – maximum net quantity per inner packaging 30 ml; maximum net quantity per outer packaging 1000 ml.
• IMDG – Limited quantities (LQ): 5 L
• IMDG – Excepted quantities (EQ): Code E1 – maximum net quantity per inner packaging 30 ml; maximum net quantity per outer packaging 1000 ml.
• UN model regulation: UN 1268 PETROLEUM DISTILLATES, N.O.S., 3, III, ENVIRONMENTALLY HAZARDOUS.

Section 8 – Personal protective measures

General protective and hygienic measures

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.

Respiratory protection

• Use a suitable respiratory protective device.
• For brief exposure or low pollution: use a respiratory filter device with filter type AX.
• For intensive or long-term exposure: use a self-contained respiratory protective device.

Hand protection

• Wear protective gloves impermeable and resistant to the product.
• Glove material: nitrile rubber is suitable for permanent contact.
• Recommended glove thickness: greater than 0.45 mm.
• For permanent contact: permeation time greater than 480 minutes according to EN 374.
• As splash protection: nitrile gloves with thickness greater than 0.45 mm and breakthrough time greater than 30 minutes according to EN 374.
• The exact breakthrough time must be obtained from the glove manufacturer and observed.

Eye protection

• Use tightly sealed goggles to protect against splashes.

Additional operational guidance

• Ensure good ventilation or local exhaust at the workplace.
• Keep ignition sources away and do not smoke.
• Protect against electrostatic charges.
• Use explosion-proof electrical equipment where applicable.

*Contenido generado por IA